Bug 146393

Summary: After install fglrx X freeze. Driver is ok. Not errors after install
Product: [Fedora] Fedora Reporter: Alvaro Cano <acano>
Component: xorg-x11Assignee: X/OpenGL Maintenance List <xgl-maint>
Status: CLOSED NOTABUG QA Contact: David Lawrence <dkl>
Severity: high Docs Contact:
Priority: medium    
Version: 3   
Target Milestone: ---   
Target Release: ---   
Hardware: i686   
OS: Linux   
Whiteboard:
Fixed In Version: Doc Type: Bug Fix
Doc Text:
Story Points: ---
Clone Of: Environment:
Last Closed: 2005-02-01 07:28:20 UTC Type: ---
Regression: --- Mount Type: ---
Documentation: --- CRM:
Verified Versions: Category: ---
oVirt Team: --- RHEL 7.3 requirements from Atomic Host:
Cloudforms Team: --- Target Upstream Version:
Embargoed:

Description Alvaro Cano 2005-01-27 20:15:22 UTC 
Description of problem:

After install fglrx_6_8_0-8.8.25-1.i386.rpm this driver is ok. Not
ouput with errors.

Init X, windows is in the border of the screen, X freeze. Keyboard not
responding. Mouse is enable. Reset computer forced.

My setup is:

Otuput for lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP]
Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
00:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
00:08.0 Modem: Intel Corp.: Unknown device 1080 (rev 03)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 74)
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon
9200 SE] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200
SE] (Secondary) (rev 01)

Otput for Xorg.0.log:

X Window System Version 6.8.1
Release Date: 17 September 2004
X Protocol Version 11, Revision 0, Release 6.8.1
Build Operating System: Linux 2.6.9-1.751_ELsmp i686 [ELF] 
Current Operating System: Linux linux 2.6.10 #7 Sat Jan 22 15:55:10
COT 2005 i686
Build Date: 01 December 2004
Build Host: tweety.build.redhat.com
 
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.10 (root@linux) (gcc versión 3.4.2
20041017 (Red Hat 3.4.2-6.fc3)) #7 Sat Jan 22 15:55:10 COT 2005 
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 26 19:40:49 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "single head configuration"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.7
	X.Org XInput driver : 0.4
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3189 card 1106,0000 rev 80 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00
hdr 01
(II) PCI: 00:06:0: chip 109e,036e card 0000,0000 rev 11 class 04,00,00
hdr 80
(II) PCI: 00:06:1: chip 109e,0878 card 0000,0000 rev 11 class 04,80,00
hdr 80
(II) PCI: 00:08:0: chip 8086,1080 card 8086,1000 rev 03 class 07,03,00
hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1462,7120 rev 80 class 0c,03,00
hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1462,7120 rev 80 class 0c,03,00
hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1462,7120 rev 80 class 0c,03,00
hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1462,7120 rev 82 class 0c,03,20
hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1106,0000 rev 00 class 06,01,00
hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1462,7120 rev 06 class 01,01,8a
hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1462,7120 rev 50 class 04,01,00
hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1462,7120 rev 74 class 02,00,00
hdr 00
(II) PCI: 01:00:0: chip 1002,5964 card 17ee,2801 rev 01 class 03,00,00
hdr 80
(II) PCI: 01:00:1: chip 1002,5d44 card 17ee,2800 rev 01 class 03,80,00
hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B]
	[1] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[B]
	[2] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[3] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xdfe00000 - 0xdfefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xbfd00000 - 0xdfcfffff (0x20000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN
is set)
(--) PCI: (0:6:0) Brooktree Corporation Bt878 Video Capture rev 17,
Mem @ 0xdfdfe000/12
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5964) rev 1,
Mem @ 0xd0000000/27, 0xdfef0000/16, I/O @ 0xc800/8, BIOS @ 0xdfec0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x5d44) rev 1,
Mem @ 0xc8000000/27, 0xdfee0000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to
0xdfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xdfffee00 - 0xdfffeeff (0x100) MX[B]
	[1] -1	0	0xdfffef00 - 0xdfffefff (0x100) MX[B]
	[2] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
	[3] -1	0	0xdfdff000 - 0xdfdfffff (0x1000) MX[B]
	[4] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[5] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
	[6] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
	[7] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
	[8] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
	[9] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[10] -1	0	0xdfdfe000 - 0xdfdfefff (0x1000) MX[B](B)
	[11] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[12] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]
	[13] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[14] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[15] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[16] -1	0	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[17] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[18] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xdfffee00 - 0xdfffeeff (0x100) MX[B]
	[1] -1	0	0xdfffef00 - 0xdfffefff (0x100) MX[B]
	[2] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
	[3] -1	0	0xdfdff000 - 0xdfdfffff (0x1000) MX[B]
	[4] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[5] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
	[6] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
	[7] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
	[8] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
	[9] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[10] -1	0	0xdfdfe000 - 0xdfdfefff (0x1000) MX[B](B)
	[11] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[12] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]
	[13] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[14] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[15] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[16] -1	0	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[17] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[18] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xdfffee00 - 0xdfffeeff (0x100) MX[B]
	[6] -1	0	0xdfffef00 - 0xdfffefff (0x100) MX[B]
	[7] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
	[8] -1	0	0xdfdff000 - 0xdfdfffff (0x1000) MX[B]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[10] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
	[11] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
	[12] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
	[13] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
	[14] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[15] -1	0	0xdfdfe000 - 0xdfdfefff (0x1000) MX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[19] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]
	[20] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[21] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[22] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[23] -1	0	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[24] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[25] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 0.0.2
	ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.8.1, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 4.3.99.902, module version = 8.8.25
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
	FireGL - (RV250 4964), FireGL - (RV250 4965),
	RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
	MOBILITY FireGL 9000 (M9 4C64), MOBILITY FireGL - (M9 4C65),
	MOBILITY RADEON 9000 (M9 4C66), RADEON 9000 PRO (D9 4C67),
	RADEON 9250 (RV280 5960), RADEON 9200 (RV280 5961),
	RADEON 9200 SE (RV280 5964), MOBILITY RADEON 9200 (M9+ 5C61),
	MOBILITY RADEON 9200 (M9+ 5C63), FireGL 8800 (R200 5148),
	RADEON 8500 (R200 514C), RADEON 9100 (R200 514D),
	RADEON - (R200 5154), RADEON - (R200 5155),
	RADEON 8500 AIW (R200 4242), RADEON 9600 (RV350 4150),
	RADEON 9600 SE (RV350 4151), RADEON 9600 PRO (RV360 4152),
	MOBILITY RADEON 9600/9700 (M10/M11 4E50), RADEON 9500 (R300 4144),
	RADEON - (R300 4145), RADEON 9600 TX (R300 4146),
	FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44),
	RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46),
	FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148),
	FireGL - (R350 414B), RADEON 9550 (RV350 4153),
	FireGL T2 (RV350 4154), FireGL - (RV350 4155), FireGL - (RV350 4156),
	FireGL - (RV350 4157), RADEON 9800 PRO (R350 4E48),
	RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
	FireGL X2-256/X2-256t (R350 4E4B),
	MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
	RADEON - (RV370 5B61), RADEON X600 (RV380 5B62),
	RADEON - (RV370 5B63), FireGL V3100 (RV370 5B64),
	FireGL - (RV370 5B66), FireGL - (RV370 5B67),
	MOBILITY RADEON X300 (M22 5460), MOBILITY RADEON - (M22 5461),
	MOBILITY RADEON - (M22 5462), MOBILITY RADEON - (M22 5463),
	MOBILITY FireGL V3100 (M22 5464), MOBILITY FireGL - (M22 5465),
	MOBILITY FireGL - (M22 5466), MOBILITY FireGL - (M22 5467),
	RADEON X600 (RV380 3E50), RADEON - (RV380 3E51),
	RADEON - (RV380 3E52), RADEON - (RV380 3E53),
	FireGL V3200 (RV380 3E54), FireGL - (RV380 3E55),
	FireGL - (RV380 3E56), FireGL - (RV380 3E57),
	MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON - (M24 3151),
	MOBILITY RADEON X300 (M22 3152), MOBILITY RADEON - (M24 3153),
	MOBILITY FireGL V3200* (M24 3154), MOBILITY FireGL -* (M24 3155),
	MOBILITY FireGL -* (M24 3156), MOBILITY FireGL -* (M24 3157),
	RADEON X800 (R420 4A48), RADEON X800 PRO (R420 4A49),
	RADEON X800 SE (R420 4A4A), RADEON X800 XT (R420 4A4B),
	RADEON X800 (R420 4A4C), FireGL X3-256 (R420 4A4D),
	MOBILITY RADEON 9800 (M18 4A4E),
	RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
	RADEON X800 PRO (R423 5549),
	RADEON X800 XT Platinum Edition (R423 554A),
	RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
	FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
	FireGL -* (R423 5552), MOBILITY RADEON X800 XT (M28 5D48),
	MOBILITY FireGL V5100* (M28 5D49), RADEON X700 XT (RV410 5E4A),
	RADEON X700 PRO (RV410 5E4B), RADEON X700 SE (RV410 5E4C),
	RADEON X700 (RV410 5E4D), RADEON X700 (RV410 5E4F),
	RADEON - (RV410 5E52), RADEON - (RV410 5E53), RADEON - (RV410 5E55),
	RADEON 9100 IGP (RS300 5834),
	RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
	MOBILITY RADEON 9000/9100 IGP (RS300M 5835)
(II) Primary Device is: PCI 01:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1)
found
(--) Chipset RADEON 9200 SE (RV280 5964) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xdfffee00 - 0xdfffeeff (0x100) MX[B]
	[6] -1	0	0xdfffef00 - 0xdfffefff (0x100) MX[B]
	[7] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
	[8] -1	0	0xdfdff000 - 0xdfdfffff (0x1000) MX[B]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[10] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
	[11] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
	[12] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
	[13] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
	[14] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[15] -1	0	0xdfdfe000 - 0xdfdfefff (0x1000) MX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[19] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]
	[20] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[21] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[22] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[23] -1	0	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[24] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[25] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x8209650
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xdfffee00 - 0xdfffeeff (0x100) MX[B]
	[6] -1	0	0xdfffef00 - 0xdfffefff (0x100) MX[B]
	[7] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
	[8] -1	0	0xdfdff000 - 0xdfdfffff (0x1000) MX[B]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[10] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
	[11] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
	[12] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
	[13] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
	[14] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[15] -1	0	0xdfdfe000 - 0xdfdfefff (0x1000) MX[B](B)
	[16] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[17] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[18] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[22] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]
	[23] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[24] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[25] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[26] -1	0	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[27] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[28] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
	[29] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[30] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "yes"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9200 SE (RV280 5964)" (Chipset = 0x5964)
(--) fglrx(0): (PciSubVendor = 0x17ee, PciSubDevice = 0x2801)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT
original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xdfef0000
(--) fglrx(0): ROM-BIOS at 0xdfec0000
(--) fglrx(0): ChipExtRevID = 0x01
(--) fglrx(0): ChipIntRevID = 0x00
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit DDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS -------- 
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1,
ConnectorType-2
(**) fglrx(0): MonitorLayout Option: 
	Monitor1--Type AUTO, Monitor2--Type AUTO

(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1
(II) fglrx(0): Primary head:
 Monitor   -- NONE
 Connector -- None
 DAC Type  -- Unknown
 TMDS Type -- NONE
 DDC Type  -- NONE
(II) fglrx(0): Secondary head:
 Monitor   -- CRT
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) fglrx(0): EDID data from the display on Secondary head
---------------------------
(II) fglrx(0): Manufacturer: GSM  Model: 3b66  Serial#: 16843009
(II) fglrx(0): Year: 2003  Week: 42
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Signal levels configurable
(II) fglrx(0): Sync:  Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 28  vert.: 21
(II) fglrx(0): Gamma: 2.76
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): redX: 0.642 redY: 0.329   greenX: 0.272 greenY: 0.604
(II) fglrx(0): blueX: 0.142 blueY: 0.062   whiteX: 0.282 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@87Hz (interlaced)
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640  vsize 480  refresh: 60  vid: 16433
(II) fglrx(0): #1: hsize: 640  vsize 480  refresh: 75  vid: 20273
(II) fglrx(0): #2: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) fglrx(0): #3: hsize: 720  vsize 405  refresh: 70  vid: 51771
(II) fglrx(0): #4: hsize: 800  vsize 600  refresh: 60  vid: 16453
(II) fglrx(0): #5: hsize: 800  vsize 600  refresh: 75  vid: 20293
(II) fglrx(0): #6: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) fglrx(0): #7: hsize: 1024  vsize 768  refresh: 60  vid: 16481
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 65.0 MHz   Image Size:  270 x 200 mm
(II) fglrx(0): h_active: 1024  h_sync: 1048  h_sync_end 1184
h_blank_end 1344 h_border: 0
(II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking:
806 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 56.2 MHz   Image Size:  270 x 200 mm
(II) fglrx(0): h_active: 800  h_sync: 832  h_sync_end 896 h_blank_end
1048 h_border: 0
(II) fglrx(0): v_active: 600  v_sync: 601  v_sync_end 604 v_blanking:
631 v_border: 0
(II) fglrx(0): Ranges: V min: 50  V max: 120 Hz, H min: 30  H max: 54
kHz, PixClock max 70 MHz
(II) fglrx(0): Monitor name: 500G
(II) fglrx(0): 
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0):  PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total 2 valid mode(s) found.
(--) fglrx(0): Virtual size is 800x600 (pitch 832)
(**) fglrx(0): *Default mode "800x600": 56.3 MHz (scaled from 0.0
MHz), 53.7 kHz, 85.1 Hz
(II) fglrx(0): Modeline "800x600"   56.30  800 832 896 1048  600 601
604 631 +hsync +vsync
(**) fglrx(0): *Default mode "640x480": 36.0 MHz (scaled from 0.0
MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"   36.00  640 696 752 832  480 481
484 509 -hsync -vsync
(**) fglrx(0): Display dimensions: (280, 210) mm
(**) fglrx(0): DPI set to (72, 72)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 6.8.1, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 4.3.99.902, module version = 8.8.25
	ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000000f
(**) fglrx(0): cpuSpeedMHz: 0x0000049b
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B]
	[1] 0	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xdfffee00 - 0xdfffeeff (0x100) MX[B]
	[8] -1	0	0xdfffef00 - 0xdfffefff (0x100) MX[B]
	[9] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
	[10] -1	0	0xdfdff000 - 0xdfdfffff (0x1000) MX[B]
	[11] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[12] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
	[13] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
	[14] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
	[15] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
	[16] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[17] -1	0	0xdfdfe000 - 0xdfdfefff (0x1000) MX[B](B)
	[18] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[19] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[20] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[21] 0	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[22] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[23] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[24] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[25] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]
	[26] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[27] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[28] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[29] -1	0	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[30] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[31] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
	[32] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[33] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area:     0xd03e9000 (size=0x07c17000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(WW) fglrx(0): could not detect XFree86 version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenByBusid: drmOpenMinor returns 4
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] loaded kernel module for "fglrx" driver
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe0aab000
(II) fglrx(0): [drm] mapped SAREA 0xe0aab000 to 0xb7f2b000
(II) fglrx(0): [drm] framebuffer handle = 0xd0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.8.25
(II) fglrx(0):     Date: Jan 14 2005
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.10
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xdfef0000
(II) fglrx(0): [agp] Mode=0x1f000a1b bridge: 0x1106/0x3189
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000b1a
(II) fglrx(0): [agp] AGP protocoll is enabled for grafics board.
(cmd=0x1f000312)
(II) fglrx(0): [agp] grafics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xe8e81000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x003e9000
(II) fglrx(0): FBMM initialized for area (0,0)-(832,1232)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(832,600) (front color
buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 600)
(II) fglrx(0): Largest offscreen area available: 832 x 624
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		24 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse0: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse0: ps2EnableDataReporting: succeeded

Output for dmesg:
Linux version 2.6.10 (root@linux) (gcc versión 3.4.2 20041017 (Red
Hat 3.4.2-6.fc3)) #7 Sat Jan 22 15:55:10 COT 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
 BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI                                   ) @ 0x000fa940
ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: MADT (v001 AMIINT VIA_K7   0x00000009 MSFT 0x00000097) @ 0x1fff00c0
ACPI: DSDT (v001    VIA   VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet napic nolapic
Initializing CPU#0
CPU 0 irqstacks, hard=c044e000 soft=c044d000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1179.074 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514532k/524224k available (2527k kernel code, 9056k reserved,
637k data, 188k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor
mode... Ok.
Calibrating delay loop... 2334.72 BogoMIPS (lpj=1167360)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps:  0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps:        0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c20)
checking if image is initramfs... it is
Freeing initrd memory: 402k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas
** so I can fix the driver.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1106768383.734:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
ttyS15 at I/O 0xec08 (irq = 5) is a 16450
ttyS44 at I/O 0xec10 (irq = 5) is a 8250
ttyS45 at I/O 0xec18 (irq = 5) is a 16450
ttyS46 at I/O 0xec20 (irq = 5) is a 8250
ttyS47 at I/O 0xec28 (irq = 5) is a 8250
ttyS54 at I/O 0xec60 (irq = 5) is a 8250
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST380011A, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive
hdd: LTN526S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63,
UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices: 
PCI0 USB1 USB2 USB3 EHCI UAR1  AC9  MC9 ILAN SLPB 
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 188k freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security:  3 users, 4 roles, 316 types, 20 bools
security:  53 classes, 10711 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev hda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for
labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured
for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses
genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
inserting floppy driver for 2.6.10
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
divert: allocating divert_blk for eth0
eth0: VIA Rhine II at 0xdfffee00, 00:0c:76:56:bc:79, IRQ 11.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link
0000.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: irq 5, pci mem 0xdfffef00
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 11, io base 0xe000
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 10, io base 0xe400
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:10.2: UHCI Host Controller
usb 1-3: new high speed USB device using ehci_hcd and address 3
uhci_hcd 0000:00:10.2: irq 5, io base 0xe800
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 2-1: new full speed USB device using uhci_hcd and address 2
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if
0 alt 0 proto 2 vid 0x043D pid 0x0078
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
ibm_acpi: ec object not found
EXT3 FS on hda3, internal journal
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel
cdrom: open failed.
cdrom: open failed.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda5, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda6, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda7, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda8, type ext3), uses xattr
  Vendor:           Model: Pen Drive 2.0     Rev: 1.01
  Type:   Direct-Access                      ANSI SCSI revision: 00
usb-storage: device scan complete
SCSI device sda: 253952 512-byte hdwr sectors (130 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 253952 512-byte hdwr sectors (130 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
 sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03df440(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Adding 1036184k swap on /dev/hda2.  Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts
Comment 1 Sitsofe Wheeler 2005-01-27 23:34:34 UTC 
This looks like a dup of bug #146392
Comment 2 Mike A. Harris 2005-02-01 07:24:48 UTC 
*** Bug 146392 has been marked as a duplicate of this bug. ***
Comment 3 Mike A. Harris 2005-02-01 07:28:20 UTC 
Thanks for the report.  For users who are experiencing problems
installing, configuring, or using the unsupported 3rd party
proprietary "fglrx" video driver, users are recommended to report
any problems they may experience to ATI support directly.  Once
ATI has been able to isolate the problem in their driver, they
may fix the issue in a future video driver update.

While Red Hat does not support the proprietary fglrx driver,
users requiring technical support may also find the various
X.Org, XFree86, and Red Hat mailing lists helpful in finding
assistance:

X.Org mailing lists:
    http://www.freedesktop.org/XOrg/XorgMailingLists

XFree86 mailing lists:
    http://www.xfree86.org/sos/lists.html

Red Hat mailing lists:
    https://listman.redhat.com/mailman/listinfo

Setting status to "NOTABUG" (unsupported).