Bug 150416
| Summary: | CPU overheat | ||
|---|---|---|---|
| Product: | [Fedora] Fedora | Reporter: | artur <aapresya> |
| Component: | kernel | Assignee: | Dave Jones <davej> |
| Status: | CLOSED CANTFIX | QA Contact: | Brian Brock <bbrock> |
| Severity: | high | Docs Contact: | |
| Priority: | medium | ||
| Version: | 3 | CC: | intel-linux-acpi, pfrields |
| Target Milestone: | --- | ||
| Target Release: | --- | ||
| Hardware: | i686 | ||
| OS: | Linux | ||
| Whiteboard: | |||
| Fixed In Version: | Doc Type: | Bug Fix | |
| Doc Text: | Story Points: | --- | |
| Clone Of: | Environment: | ||
| Last Closed: | 2005-10-03 00:34:03 UTC | Type: | --- |
| Regression: | --- | Mount Type: | --- |
| Documentation: | --- | CRM: | |
| Verified Versions: | Category: | --- | |
| oVirt Team: | --- | RHEL 7.3 requirements from Atomic Host: | |
| Cloudforms Team: | --- | Target Upstream Version: | |
| Embargoed: | |||
|
Description
artur
2005-03-05 22:35:41 UTC
The results of lspci -vv and dmidecode are below
lspci -vv
00:00.0 Host bridge: ATI Technologies Inc: Unknown device cab3 (rev 05)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at b0000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at b4000000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: e0000000-efffffff
Prefetchable memory behind bridge: a0000000-afffffff
Secondary status: 66Mhz+ FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1
(rev 01) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at f0001000 (32-bit, non-prefetchable) [size=4K]
00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2
(rev 01) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at f0002000 (32-bit, non-prefetchable) [size=4K]
00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller (rev
01) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 18)
Subsystem: Toshiba America Info Systems: Unknown device ff10
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at e000 [size=16]
Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=1K]
00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4349
(prog-if 8a [Master SecP PriP])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort+ <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 8070 [size=16]
00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 434c
Subsystem: Toshiba America Info Systems: Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4342 (prog-if
01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: d0000000-dfffffff
Prefetchable memory behind bridge: 90000000-9fffffff
Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97
Audio Controller
Subsystem: Toshiba America Info Systems: Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort-<MAbort- >SERR- <PERR-
Latency: 64 (500ns min), Cache Line Size 08
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f0000400 (32-bit, non-prefetchable) [size=256]
00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01) (prog-if
00 [Generic])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort-<MAbort- >SERR- <PERR-
Latency: 64 (500ns min), Cache Line Size 08
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f0000500 (32-bit, non-prefetchable) [size=256]
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon
Mobility 7000 IGP (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at a0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at e0000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>
02:04.0 Ethernet controller: Atheros Communications, Inc. AR5212
802.11abg NIC (rev 01)
Subsystem: Askey Computer Corp.: Unknown device 7064
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0010000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>
02:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
Controller (rev 02)
Subsystem: Toshiba America Info Systems: Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size 20
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt-
PostWrite+
16-bit legacy interface ports at 0001
02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Toshiba America Info Systems: Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
AND HERE IS dmidecode
/usr/sbin/dmidecode
# dmidecode 2.2
SMBIOS 2.3 present.
37 structures occupying 1209 bytes.
Table at 0x000EB160.
Handle 0x0000
DMI type 0, 20 bytes.
BIOS Information
Vendor: TOSHIBA
Version: Version 1.70
Release Date: 09/10/2004
Address: 0xEB000
Runtime Size: 84 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
BIOS ROM is socketed
Boot from PC Card (PCMCIA) is supported
EDD is supported
Japanese floppy for NEC 9800 1.2 MB is
supported (int 13h)
3.5"/720 KB floppy services are supported (int
13h)
3.5"/2.88 MB floppy services are supported
(int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
AGP is supported
ATAPI Zip drive boot is supported
Smart battery is supported
Function key-initiated network boot is supported
Handle 0x0001
DMI type 1, 25 bytes.
System Information
Manufacturer: TOSHIBA
Product Name: Satellite A65
Version: PSA60U-02K015
Serial Number: 64180987Q
UUID: 0D3DF4E0-BE8D-11D8-A70E-00A0D1DAF274
Wake-up Type: Power Switch
Handle 0x0002
DMI type 2, 8 bytes.
Base Board Information
Manufacturer: TOSHIBA
Product Name: Portable PC
Version: Version A0
Serial Number: 0000000000
Handle 0x0003
DMI type 3, 17 bytes.
Chassis Information
Manufacturer: TOSHIBA
Type: Portable
Lock: Not Present
Version: Version 1.0
Serial Number: 00000000
Asset Tag: 0000000000
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Handle 0x0004
DMI type 4, 32 bytes.
Processor Information
Socket Designation: mFCPGA
Type: Central Processor
Family: Pentium 4
Manufacturer: GenuineIntelation
ID: FF FB EB BF 00 00 00 00
Signature: Type 3, Family FEB, Model BF, Stepping F
Flags: None
Version: Pentium 4
Voltage: 2.9 V
External Clock: 133 MHz
Max Speed: 3200 MHz
Current Speed: 2799 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Handle 0x0005
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Burst
Pipeline Burst
Installed SRAM Type: Burst Pipeline Burst
Speed: Unknown
Error Correction Type: None
System Type: Unknown
Associativity: Unknown
Handle 0x0006
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 128 KB
Maximum Size: 128 KB
Supported SRAM Types:
Burst
Pipeline Burst
Installed SRAM Type: Burst Pipeline Burst
Speed: Unknown
Error Correction Type: None
System Type: Unknown
Associativity: Unknown
Handle 0x0007
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Parallel Port
Internal Connector Type: None
External Reference Designator: J20
External Connector Type: DB-25 male
Port Type: Parallel Port ECP/EPP
Handle 0x0008
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: USB Conn.
Internal Connector Type: None
External Reference Designator: J12
External Connector Type: Other
Port Type: USB
Handle 0x0009
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: VGA Conn.
Internal Connector Type: None
External Reference Designator: J7
External Connector Type: Other
Port Type: Other
Handle 0x000A
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: DC Input
Internal Connector Type: None
External Reference Designator: J35
External Connector Type: Other
Port Type: Other
Handle 0x000B
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: IrDA Port
Internal Connector Type: None
External Reference Designator: U1
External Connector Type: Infrared
Port Type: Other
Handle 0x000C
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: CardBus Conn.
Internal Connector Type: None
External Reference Designator: J26
External Connector Type: Other
Port Type: Cardbus
Handle 0x000D
DMI type 10, 14 bytes.
On Board Device Information
Type: Other
Status: Enabled
Description: ECP Port
On Board Device Information
Type: Other
Status: Enabled
Description: IrDA Port
On Board Device Information
Type: Other
Status: Enabled
Description: CardBus Bridge
On Board Device Information
Type: Other
Status: Enabled
Description: IDE Controller
On Board Device Information
Type: Video
Status: Enabled
Description: VGA
Handle 0x000E
DMI type 11, 5 bytes.
OEM Strings
String 1: PSA60L-000C3
String 2: PSA60U-02K015,SQ003378,01V
Handle 0x000F
DMI type 12, 5 bytes.
System Configuration Options
Option 1: TOSHIBA
Handle 0x0010
DMI type 13, 22 bytes.
BIOS Language Information
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0011
DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 1536 MB
Error Information Handle: 0x0017
Number Of Devices: 1
Handle 0x0012
DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: Video Memory
Error Correction Type: None
Maximum Capacity: 128 MB
Error Information Handle: Not Provided
Number Of Devices: 1
Handle 0x0013
DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: Flash Memory
Error Correction Type: None
Maximum Capacity: 512 kB
Error Information Handle: Not Provided
Number Of Devices: 1
Handle 0x0014
DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: Cache Memory
Error Correction Type: None
Maximum Capacity: 1 MB
Error Information Handle: Not Provided
Number Of Devices: 1
Handle 0x0015
DMI type 17, 23 bytes.
Memory Device
Array Handle: 0x0011
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: Unknown
Set: Unknown
Locator: DRAM Slot 0
Bank Locator: Banks 0/1
Type: Unknown
Type Detail: Unknown
Speed: 1 MHz (1000.0 ns)
Handle 0x0016
DMI type 17, 23 bytes.
Memory Device
Array Handle: 0x0011
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 256 MB
Form Factor: DIMM
Set: Unknown
Locator: DRAM Slot 1
Bank Locator: Banks 2/3
Type: DDR
Type Detail: Synchronous
Speed: 266 MHz (3.8 ns)
Handle 0x0017
DMI type 18, 23 bytes.
32-bit Memory Error Information
Type: Unknown
Granularity: Memory Partition Level
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x0018
DMI type 19, 15 bytes.
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0000012C3FF
Range Size: 1201 kB
Physical Array Handle: 0x0011
Partition Width: 0
Handle 0x0019
DMI type 21, 7 bytes.
Built-in Pointing Device
Type: Mouse
Interface: PS/2
Buttons: 2
Handle 0x001A
DMI type 22, 26 bytes.
Portable Battery
Location: Smart Battery Conn J37
Manufacturer: Duracell
Manufacture Date: 01/06/97
Serial Number: 0042
Name: DR36
Design Capacity: Unknown
Design Voltage: 12 mV
SBDS Version: V1.0
Maximum Error: 6%
SBDS Chemistry: Not Specified
OEM-specific Information: 0x00000000
Handle 0x001B
DMI type 23, 13 bytes.
System Reset
Status: Disabled
Watchdog Timer: No
Boot Option: <OUT OF SPEC>
Boot Option On Limit: <OUT OF SPEC>
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown
Handle 0x001C
DMI type 24, 5 bytes.
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Disabled
Front Panel Reset Status: Not Implemented
Handle 0x001D
DMI type 25, 9 bytes.
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x001E
DMI type 26, 20 bytes.
Voltage Probe
Description: Voltage Probe Description
Location: Unknown
Status: Unknown
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x001F
DMI type 27, 12 bytes.
Cooling Device
Temperature Probe Handle: 0x0020
Type: Unknown
Status: Unknown
OEM-specific Information: 0x00000000
Handle 0x0020
DMI type 28, 20 bytes.
Temperature Probe
Description: Temperature Probe Description
Location: Unknown
Status: Unknown
Maximum Value: Unknown
Minimum Value Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0021
DMI type 29, 20 bytes.
Electrical Current Probe
Description: Electrical Probe Description
Location: Unknown
Status: Unknown
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0022
DMI type 30, 6 bytes.
Out-of-band Remote Access
Manufacturer Name: Manufacturer Name
Inbound Connection: Disabled
Outbound Connection: Disabled
Handle 0x0023
DMI type 32, 11 bytes.
System Boot Information
Status: No errors detected
Handle 0x0024
DMI type 127, 4 bytes.
End Of Table
which kernel version is this ? Did you try the latest update ? can you paste the output of dmesg -s 128000 please ? (The Intel folks Cc'd will probably want you to run other info too, but this is a good start) dmesg -s 128000
Linux version 2.6.10-1.770_FC3 (bhcompile.redhat.com) (gcc version
3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Thu Feb 24 14:00:06 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bffffc0 (ACPI data)
BIOS-e820: 000000000bffffc0 - 000000000c000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
191MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 49136
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 45040 pages, LIFO batch:10
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb acpi=off apm=on quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c03d3000 soft=c03d2000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 2800.498 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 190012k/196544k available (2045k kernel code, 5960k reserved, 655k data,
160k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5554.17 BogoMIPS (lpj=2777088)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 946k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xe9964, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: ACPI disable
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
PCI: Transparent bridge - 0000:00:14.4
PCI: Using IRQ router default [1002/4353] at 0000:00:14.0
PCI: IRQ 0 for device 0000:00:13.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:13.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:13.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:14.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:02:06.0 doesn't match PIRQ mask - try pci=usepirqmask
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1110222169.620:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key C1F2FA57F7EECD64
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected Ati IGP7000/M chipset
agpgart: Maximum main memory to use for agp memory: 149M
agpgart: AGP aperture is 64M @ 0xb0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
PCI: IRQ 0 for device 0000:00:14.1 doesn't match PIRQ mask - try pci=usepirqmask
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHT2060AT, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-R2512, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
180 degree mounted touchpad
Sensor: 37
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 256 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 4681)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 160k freed
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 318 types, 20 bools
security: 53 classes, 10781 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
floppy0: no floppy controllers found
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.12.14 (AR5210, AR5211, AR5212)
wlan: 0.8.4.5 (EXPERIMENTAL)
ath_rate_onoe: 1.0
ath_pci: 0.9.4.12 (EXPERIMENTAL)
divert: allocating divert_blk for ath0
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
ath0: mac 5.9 phy 4.3 radio 4.6
ath0: 802.11 address: 00:90:96:bc:8d:1e
ath0: Use hw queue 0 for WME_AC_BE traffic
ath0: Use hw queue 1 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Atheros 5212: mem=0xd0010000, irq=11
8139too Fast Ethernet driver 0.9.27
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0xa000, 00:a0:d1:da:f2:74, IRQ 5
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
atiixp: codec reset timeout
PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
PCI: IRQ 0 for device 0000:00:13.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: No IRQ known for interrupt pin A of device 0000:00:13.2. Please try using
pci=biosirq.
ehci_hcd 0000:00:13.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.2 setup!
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: IRQ 0 for device 0000:00:13.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: No IRQ known for interrupt pin A of device 0000:00:13.0. Please try using
pci=biosirq.
ohci_hcd 0000:00:13.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.0 setup!
PCI: IRQ 0 for device 0000:00:13.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: No IRQ known for interrupt pin A of device 0000:00:13.1. Please try using
pci=biosirq.
ohci_hcd 0000:00:13.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.1 setup!
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: IRQ 0 for device 0000:02:06.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: No IRQ known for interrupt pin A of device 0000:02:06.0. Please try using
pci=biosirq.
Yenta: CardBus bridge found at 0000:02:06.0 [1179:ff10]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to ISA
Yenta TI: socket 0000:02:06.0, mfunc 0x01111122, devctl 0x64
Yenta TI: socket 0000:02:06.0 no PCI interrupts. Fish. Please report.
Yenta: ISA IRQ mask 0x02d8, PCI irq 0
Socket status: 30000006
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03697c0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
NTFS driver 2.1.22 [Flags: R/W MODULE].
NTFS volume version 3.1.
SELinux: initialized (dev hda1, type ntfs), uses genfs_contexts
Adding 393208k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ieee1394: Initialized config rom entry `ip1394'
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1535 buckets, 12280 max) - 360 bytes per conntrack
cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57
0xc68-0xc6f 0xcd0-0xcd7
cs: IO port probe 0x0100-0x04ff: excluding 0x300-0x307 0x310-0x317 0x378-0x37f
0x408-0x40f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
[drm] Initialized radeon 1.11.0 20020828 on minor 0:
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
irq 10: nobody cared (try booting with the "irqpoll" option.
[<c013e0a0>] __report_bad_irq+0x2b/0x68
[<c013e169>] note_interrupt+0x73/0x96
[<c013d6cc>] __do_IRQ+0x1bd/0x249
[<c0104e04>] do_IRQ+0x5e/0x7a
=======================
[<c01035b2>] common_interrupt+0x1a/0x20
[<cc8f7f36>] zz00b706bc+0x4e/0x58 [ath_hal]
[<cc8d8199>] ath_mode_init+0x26/0x134 [ath_pci]
[<cc8d6f6f>] ath_init+0x223/0x23a [ath_pci]
[<c02a9a59>] __dev_mc_upload+0x1d/0x1e
[<c02a9aff>] dev_mc_upload+0xa5/0x122
[<c02a6389>] dev_open+0x4c/0x6b
[<c02a76d8>] dev_change_flags+0x48/0xee
[<c02e14d6>] devinet_ioctl+0x26e/0x4de
[<c02e2f62>] inet_ioctl+0x79/0xa5
[<c029e2e6>] sock_ioctl+0x21d/0x226
[<c017400d>] sys_ioctl+0x1d0/0x1eb
[<c0103443>] syscall_call+0x7/0xb
handlers:
[<cc97a50c>] (snd_atiixp_interrupt+0x0/0x195 [snd_atiixp])
[<cc980f99>] (snd_atiixp_interrupt+0x0/0x160 [snd_atiixp_modem])
Disabling IRQ #10
ath0: no IPv6 routers present
can you do the same thing without the acpi=off please ? So here it is without acpi=off
dmesg -s 128000
Linux version 2.6.10-1.770_FC3 (bhcompile.redhat.com) (gcc version
3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Thu Feb 24 14:00:06 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bffffc0 (ACPI data)
BIOS-e820: 000000000bffffc0 - 000000000c000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
191MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 49136
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 45040 pages, LIFO batch:10
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 OID_00 ) @ 0x000e6010
ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x0bffb60f
ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x0bfffa90
ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x30303030) @ 0x0bfffb20
ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x0bfffb90
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x0bffb822
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x0bffb647
ACPI: DSDT (v001 TOSINV Avani2 0x00001004 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c03d3000 soft=c03d2000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 2800.766 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 190012k/196544k available (2045k kernel code, 5960k reserved, 655k data,
160k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5570.56 BogoMIPS (lpj=2785280)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c20)
checking if image is initramfs... it is
Freeing initrd memory: 946k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xe9964, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11) *0, disabled.
ACPI: Embedded Controller [EC0] (gpe 7)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: Power Resource [PFA1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas
** so I can fix the driver.
pnp: 00:06: ioport range 0x200-0x20f has been reserved
pnp: 00:06: ioport range 0x280-0x29f has been reserved
pnp: 00:06: ioport range 0x40b-0x40b has been reserved
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1110276676.087:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key C1F2FA57F7EECD64
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN1] (off)
ACPI: Thermal Zone [THZN] (58 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected Ati IGP7000/M chipset
agpgart: Maximum main memory to use for agp memory: 149M
agpgart: AGP aperture is 64M @ 0xb0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:14.6[B] -> GSI 10 (level, low) -> IRQ 10
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 11 (level, low) -> IRQ 11
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHT2060AT, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-R2512, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
180 degree mounted touchpad
Sensor: 37
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 256 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 4681)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
LID USB0 USB1 USB2 MC97 P2P LAN0
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 160k freed
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 318 types, 20 bools
security: 53 classes, 10781 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
floppy0: no floppy controllers found
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.12.14 (AR5210, AR5211, AR5212)
wlan: 0.8.4.5 (EXPERIMENTAL)
ath_rate_onoe: 1.0
ath_pci: 0.9.4.12 (EXPERIMENTAL)
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 10 (level, low) -> IRQ 10
divert: allocating divert_blk for ath0
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps36Mbps 48Mbps 54Mbps
ath0: mac 5.9 phy 4.3 radio 4.6
ath0: 802.11 address: 00:90:96:bc:8d:1e
ath0: Use hw queue 0 for WME_AC_BE traffic
ath0: Use hw queue 1 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Atheros 5212: mem=0xd0010000, irq=10
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 5 (level, low) -> IRQ 5
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0xa000, 00:a0:d1:da:f2:74, IRQ 5
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 10 (level, low) -> IRQ 10
atiixp: codec reset timeout
ACPI: PCI interrupt 0000:00:14.6[B] -> GSI 10 (level, low) -> IRQ 10
PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: irq 11, pci mem 0x10000000
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: irq 11, pci mem 0xf0001000
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: irq 11, pci mem 0xf0002000
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:06.0 [1179:ff10]
Yenta: adjusting diagnostic: 01 -> 61
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01111122, devctl 0x64
Yenta: ISA IRQ mask 0x00d8, PCI irq 11
Socket status: 30000006
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03697c0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ibm_acpi: ec object not found
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
NTFS driver 2.1.22 [Flags: R/W MODULE].
NTFS volume version 3.1.
SELinux: initialized (dev hda1, type ntfs), uses genfs_contexts
Adding 393208k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Trying to free free DMA3
pnp: Device 00:09 disabled.
ieee1394: Initialized config rom entry `ip1394'
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1535 buckets, 12280 max) - 360 bytes per conntrack
cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57
0xc68-0xc6f 0xcd0-0xcd7
cs: IO port probe 0x0100-0x04ff: excluding 0x300-0x307 0x310-0x317 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPCB.SIOD.PSRS]
(Node cbee3d80), AE_AML_PACKAGE_LIMIT
ACPI-1138: *** Error: Method execution failed
[\_SB_.PCI0.LPCB.SIOD.ECP_._SRS] (Node cbee3f60), AE_AML_PACKAGE_LIMIT
pnp: Failed to activate device 00:09.
parport_pc: probe of 00:09 failed with error -5
lp: driver loaded but no devices found
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.11.0 20020828 on minor 0:
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
ath0: no IPv6 routers present
ACPI-0272: *** Error: Thread 1444 cannot release Mutex [MUT1] acquired by
thread 144B
ACPI-1138: *** Error: Method execution failed [\_SB_.RDEC] (Node cbee13c0),
AE_AML_NOT_OWNER
ACPI-1138: *** Error: Method execution failed [\_SB_.AC__._PSR] (Node
cbee75c0), AE_AML_NOT_OWNER
ACPI-0272: *** Error: Thread 1444 cannot release Mutex [MUT1] acquired by
thread 144B
ACPI-1138: *** Error: Method execution failed [\_SB_.RDEC] (Node cbee13c0),
AE_AML_NOT_OWNER
ACPI-1138: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node
cbee7480), AE_AML_NOT_OWNER
Any news on progress? Just curious... An update has been released for Fedora Core 3 (kernel-2.6.12-1.1372_FC3) which may contain a fix for your problem. Please update to this new kernel, and report whether or not it fixes your problem. If you have updated to Fedora Core 4 since this bug was opened, and the problem still occurs with the latest updates for that release, please change the version field of this bug to 'fc4'. Thank you. This bug has been automatically closed as part of a mass update. It had been in NEEDINFO state since July 2005. If this bug still exists in current errata kernels, please reopen this bug. There are a large number of inactive bugs in the database, and this is the only way to purge them. Thank you. |