Bug 150716

Summary: kudzu can't find Advansys SCSI card
Product: [Fedora] Fedora Reporter: Dick Holland <dick>
Component: kernelAssignee: Dave Jones <davej>
Status: CLOSED CANTFIX QA Contact: Brian Brock <bbrock>
Severity: medium Docs Contact:
Priority: medium    
Version: 3CC: pfrields
Target Milestone: ---   
Target Release: ---   
Hardware: i386   
OS: Linux   
Whiteboard:
Fixed In Version: Doc Type: Bug Fix
Doc Text:
Story Points: ---
Clone Of: Environment:
Last Closed: 2005-10-03 00:58:40 UTC Type: ---
Regression: --- Mount Type: ---
Documentation: --- CRM:
Verified Versions: Category: ---
oVirt Team: --- RHEL 7.3 requirements from Atomic Host:
Cloudforms Team: --- Target Upstream Version:
Embargoed:

Description Dick Holland 2005-03-09 22:14:47 UTC
From Bugzilla Helper:
User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.7.5)
Gecko/20041110 Firefox/1.0

Description of problem:
Kudzu in FC3 can't find an Iwill 2930 SCSI card with an Advansys chip,
but an "lspci" command can.

Kernel is 2.6.10-1.741-FC3 and /boot/config-2.6.10-1.741-FC3 seems to
indicate that the Advansys driver is enabled: it has a line which
reads "CONFIG_ADVANSYS_SCSI=m".


Version-Release number of selected component (if applicable):
kudzu-1.1.95-1

How reproducible:
Always

Steps to Reproduce:
1. Boot machine with SCSI card inserted
2. Kudzu fails to detect card
3. Run lspci command in shell; card is detected

Actual Results:  Kudzu does not detect the SCSI card. Running kudzu
from a shell also does not detect SCSI card.

Expected Results:  Kudzu is expected to detect SCSI card when "probing
new hardware" appears at boot time

Additional info:

Comment 1 Bill Nottingham 2005-03-09 22:17:54 UTC
Does lodaing the module work?

Comment 2 Dick Holland 2005-03-10 07:07:58 UTC
Yes it does. "modprobe advansys" causes the module to load with
success messages in /var/log/message.

Comment 3 Bill Nottingham 2005-03-10 16:49:50 UTC
Please post the output of lspci.

Comment 4 Dick Holland 2005-03-10 20:47:22 UTC
Bill, I guessed you'd want the most verbose output, so here's the
output from "lspci -vv"

------------------------------>8-----------------------------------

00:00.0 Host bridge: ALi Corporation M1647 Northbridge [MAGiK 1 /
MobileMAGiK 1] (rev 04)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR+
        Latency: 0
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: [b0] AGP version 2.0
                Status: RQ=28 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>
        Capabilities: [a4] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller (prog-if 00
[Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: d6000000-d7dfffff
        Prefetchable memory behind bridge: d7f00000-dfffffff
        Secondary status: 66Mhz+ FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
        Subsystem: ALi Corporation USB 1.1 Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), Cache Line Size 08
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at d5800000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if fa)
        Subsystem: ASUSTeK Computer Inc. A7A266 Motherboard IDE
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (500ns min, 1000ns max)
        Interrupt: pin A routed to IRQ 255
        Region 4: I/O ports at d400 [size=16]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
        Subsystem: ALi Corporation USB 1.1 Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), Cache Line Size 08
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at d4800000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
        Subsystem: ALi Corporation ALI M1533 Aladdin IV ISA Bridge
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [a0] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at b400 [size=256]
        Region 1: Memory at d3800000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at b000 [size=256]
        Region 1: Memory at d3000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 SCSI storage controller: Advanced System Products, Inc
ABP940-U / ABP960-U (rev 03)
        Subsystem: Advanced System Products, Inc ASC1300 SCSI Adapter
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1000ns min, 1000ns max), Cache Line Size 08
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at a800 [size=256]
        Region 1: Memory at d2800000 (32-bit, non-prefetchable) [size=256]

00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 9
        Region 0: I/O ports at a400 [size=256]
        Region 1: Memory at d2000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-

01:00.0 VGA compatible controller: nVidia Corporation NV11DDR
[GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at d7ff0000 [disabled] [size=64K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [44] AGP version 2.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>

Comment 5 Bill Nottingham 2005-03-10 21:57:14 UTC
The driver doesn't export PCI ids - assigning to the kernel.

Comment 6 Dave Jones 2005-07-15 18:39:08 UTC
An update has been released for Fedora Core 3 (kernel-2.6.12-1.1372_FC3) which
may contain a fix for your problem.   Please update to this new kernel, and
report whether or not it fixes your problem.

If you have updated to Fedora Core 4 since this bug was opened, and the problem
still occurs with the latest updates for that release, please change the version
field of this bug to 'fc4'.

Thank you.

Comment 7 Dave Jones 2005-10-03 00:58:40 UTC
This bug has been automatically closed as part of a mass update.
It had been in NEEDINFO state since July 2005.
If this bug still exists in current errata kernels, please reopen this bug.

There are a large number of inactive bugs in the database, and this is the only
way to purge them.

Thank you.