Bug 1680542

Description of problem:


Version-Release number of selected component (if applicable):
openvswitch2.11-2.11.0-0.20190129gitd3a10db.el7fdp.x86_64
dpdk-tools-18.11-2.el7_6.x86_64
dpdk-18.11-2.el7_6.x86_64

How reproducible:


Steps to Reproduce:
1. Configure hugepage as following.
[root@dell-per730-52 ~]# more /proc/cmdline 
BOOT_IMAGE=/vmlinuz-3.10.0-957.el7.x86_64 root=/dev/mapper/rhel_dell--per730--52-root ro crashkernel=auto rd.lvm.lv=rhel_dell-per730-52/root rd.lvm.lv
=rhel_dell-per730-52/swap console=ttyS0,115200n81 nohz=on default_hugepagesz=1G hugepagesz=1G hugepages=24 intel_iommu=on iommu=pt modprobe.blacklist=
qedi modprobe.blacklist=qedf modprobe.blacklist=qedr skew_tick=1 nohz=on nohz_full=1,3,5,7,9,11,13,15,17,19,21,23,25,27,29,31,33,35,37,39,41,43,45,47,
49,51,53,55 rcu_nocbs=1,3,5,7,9,11,13,15,17,19,21,23,25,27,29,31,33,35,37,39,41,43,45,47,49,51,53,55 tuned.non_isolcpus=00555555,55555555 intel_pstate
=disable nosoftlockup

2.
Run following command.
 /usr/bin/ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem=1024,1024
 /usr/bin/ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-init=true
 /usr/bin/ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-lcore-mask=0x2
 /usr/bin/ovs-vsctl --no-wait set Open_vSwitch . other_config:vhost-iommu-support=true
 /usr/bin/ovs-vsctl --timeout 10 add-br br0 -- set bridge br0 datapath_type=netdev
 /usr/bin/ovs-vsctl --timeout 10 set Open_vSwitch . other_config:max-idle=30000
 /usr/bin/ovs-vsctl --timeout 10 set Open_vSwitch . other_config:pmd-cpu-mask=0xaa00000aa00000
 /usr/bin/ovs-vsctl --timeout 10 add-port br0 dpdk0 -- set Interface dpdk0 type=dpdk options:dpdk-devargs=0000:82:00.0 options:n_rxq=4


Actual results:
Add dpdk0 to br0 failed.
/var/log/openvswitch/ovs-vswitchd.log.
2019-02-25T09:46:00.609Z|00109|dpdk|INFO|EAL: PCI device 0000:82:00.0 on NUMA socket 1
2019-02-25T09:46:00.609Z|00110|dpdk|INFO|EAL:   probe driver: 1077:1656 net_qede
2019-02-25T09:46:00.609Z|00111|dpdk|ERR|EAL: Driver cannot attach the device (0000:82:00.0)
2019-02-25T09:46:00.609Z|00112|dpdk|ERR|EAL: Failed to attach device on primary process
2019-02-25T09:46:00.609Z|00113|netdev_dpdk|WARN|Error attaching device '0000:82:00.0' to DPDK
2019-02-25T09:46:00.609Z|00114|netdev|WARN|dpdk0: could not set configuration (Invalid argument)
2019-02-25T09:46:00.609Z|00115|dpdk|ERR|Invalid port_id=32


Expected results:
Add dpdk0 to bridge successfully.

Additional info: