Bug 1791279
| Summary: | bonding configuration no longer works as documented | ||
|---|---|---|---|
| Product: | OpenShift Container Platform | Reporter: | Scott Dodson <sdodson> |
| Component: | RHCOS | Assignee: | Micah Abbott <miabbott> |
| Status: | CLOSED ERRATA | QA Contact: | Michael Nguyen <mnguyen> |
| Severity: | urgent | Docs Contact: | |
| Priority: | urgent | ||
| Version: | 4.4 | CC: | bbreard, bchardim, dcain, dornelas, dustymabe, erich, imcleod, jligon, mharri, miabbott, mnguyen, nstielau, scuppett, smilner |
| Target Milestone: | --- | Keywords: | Regression |
| Target Release: | 4.4.0 | ||
| Hardware: | Unspecified | ||
| OS: | Unspecified | ||
| Whiteboard: | |||
| Fixed In Version: | Doc Type: | If docs needed, set a value | |
| Doc Text: | Story Points: | --- | |
| Clone Of: | 1789601 | Environment: | |
| Last Closed: | 2020-05-04 11:24:44 UTC | Type: | --- |
| Regression: | --- | Mount Type: | --- |
| Documentation: | --- | CRM: | |
| Verified Versions: | Category: | --- | |
| oVirt Team: | --- | RHEL 7.3 requirements from Atomic Host: | |
| Cloudforms Team: | --- | Target Upstream Version: | |
| Embargoed: | |||
| Bug Depends On: | |||
| Bug Blocks: | 1789601, 1792022 | ||
|
Comment 1
Steve Milner
2020-01-20 14:48:14 UTC
Current code on `master` of openshift/install is pointing to 44.81.202001241431.0 which includes ignition-0.35.0-0.rhaos4.4.git7afbeba.el8 https://github.com/openshift/installer/blob/master/data/data/rhcos.json Moving to MODIFIED Verified on 44.81.202001241431.0. Bond interface comes up after following directions from https://bugzilla.redhat.com/show_bug.cgi?id=1758091#c20. No action was needed after setting ip= $ sshq core.101.100 Warning: Permanently added '192.168.101.100' (ECDSA) to the list of known hosts. Red Hat Enterprise Linux CoreOS 44.81.202001241431.0 Part of OpenShift 4.4, RHCOS is a Kubernetes native operating system managed by the Machine Config Operator (`clusteroperator/machine-config`). WARNING: Direct SSH access to machines is not recommended; instead, make configuration changes via `machineconfig` objects: https://docs.openshift.com/container-platform/4.4/architecture/architecture-rhcos.html --- [core@rhcos ~]$ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp1s0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bond0 state UP group default qlen 1000 link/ether 52:54:00:43:2e:15 brd ff:ff:ff:ff:ff:ff 3: enp2s0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bond0 state UP group default qlen 1000 link/ether 52:54:00:43:2e:15 brd ff:ff:ff:ff:ff:ff 5: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:43:2e:15 brd ff:ff:ff:ff:ff:ff inet 192.168.101.100/24 brd 192.168.101.255 scope global noprefixroute bond0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe43:2e15/64 scope link valid_lft forever preferred_lft forever [core@rhcos ~]$ te tee telinit test [core@rhcos ~]$ rpm-ostree status State: idle AutomaticUpdates: disabled Deployments: ● ostree://f61524fda480c611dcd25629fd15eb6de27a306689261c211dbc8e88c19a5219 Version: 44.81.202001241431.0 (2020-01-24T14:36:48Z) [core@rhcos ~]$ [core@rhcos ~]$ cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: fault-tolerance (active-backup) Primary Slave: None Currently Active Slave: enp1s0 MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: enp1s0 MII Status: up Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 52:54:00:43:2e:15 Slave queue ID: 0 Slave Interface: enp2s0 MII Status: up Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 52:54:00:2e:ad:b6 Slave queue ID: 0 [core@rhcos ~]$ cat /etc/sysconfig/network-scripts/ifcfg-bond0 # Generated by dracut initrd NAME="bond0" DEVICE="bond0" ONBOOT=yes NETBOOT=yes UUID="f8d155bc-e988-4734-a883-5ae57243fc50" BOOTPROTO=none IPADDR="192.168.101.100" NETMASK="255.255.255.0" GATEWAY="192.168.101.1" BONDING_OPTS="mode=active-backup miimon=100" NAME="bond0" TYPE=Bond DNS1="192.168.101.1" [core@rhcos ~]$ cat /etc/sysconfig/network-scripts/ifcfg-enp1s0 # Generated by dracut initrd NAME="enp1s0" TYPE=Ethernet ONBOOT=yes NETBOOT=yes SLAVE=yes MASTER="bond0" UUID="f1040ac2-ee67-4d72-8d82-4e18f2f29d70" DEVICE="enp1s0" [core@rhcos ~]$ cat /etc/sysconfig/network-scripts/ifcfg-enp2s0 # Generated by dracut initrd NAME="enp2s0" TYPE=Ethernet ONBOOT=yes NETBOOT=yes SLAVE=yes MASTER="bond0" UUID="badeba01-e201-4cb8-b8a4-0f312ec1bcdd" DEVICE="enp2s0" Since the problem described in this bug report should be resolved in a recent advisory, it has been closed with a resolution of ERRATA. For information on the advisory, and where to find the updated files, follow the link below. If the solution does not work for you, open a new bug report. https://access.redhat.com/errata/RHBA-2020:0581 |