Bug 1966719
| Summary: | ipmitool sdr list full fails on Intel S5520HC(Motherboard) and MFSys25(S5520VI) Blade Server since 8.4 | ||
|---|---|---|---|
| Product: | Red Hat Enterprise Linux 8 | Reporter: | Nathan Coulson <nathan> |
| Component: | ipmitool | Assignee: | Pavel Cahyna <pcahyna> |
| Status: | CLOSED WONTFIX | QA Contact: | Jeff Bastian <jbastian> |
| Severity: | unspecified | Docs Contact: | |
| Priority: | unspecified | ||
| Version: | 8.4 | CC: | ajschorr, rvr |
| Target Milestone: | beta | ||
| Target Release: | --- | ||
| Hardware: | x86_64 | ||
| OS: | Linux | ||
| Whiteboard: | |||
| Fixed In Version: | Doc Type: | If docs needed, set a value | |
| Doc Text: | Story Points: | --- | |
| Clone Of: | Environment: | ||
| Last Closed: | 2022-12-01 07:27:48 UTC | Type: | Bug |
| Regression: | --- | Mount Type: | --- |
| Documentation: | --- | CRM: | |
| Verified Versions: | Category: | --- | |
| oVirt Team: | --- | RHEL 7.3 requirements from Atomic Host: | |
| Cloudforms Team: | --- | Target Upstream Version: | |
| Embargoed: | |||
|
Description
Nathan Coulson
2021-06-01 18:11:35 UTC
Description of problem: After Upgrading from AlmaLinux 8.3 to 8.4 (Things are still fine at this point) then Rebooting into 4.18.0-305, ipmitool sdr list full stops working. In addition to this, when locked up, I cannot manage the blade servers via the MFSys25 web interface, * And rebooting one of these servers when in this state, /dev/ipmi0 was missing, with dmesg saying it couldn't find a BMC at that location. Unable to test further until I get onsite to pull the blade servers and reinsert due to loss of management On the standalone board, booting into the old kernel didn't fix the issue, until I did a full shutdown then startup (Done by remote powerbar, due to remote environment. Unsure if a normal shutdown/startup while power is still applied would fix it) (In reply to Nathan Coulson from comment #1) > On the standalone board, booting into the old kernel didn't fix the issue, > until I did a full shutdown then startup (Done by remote powerbar, due to > remote environment. Unsure if a normal shutdown/startup while power is > still applied would fix it) Interesting. At this point, the new ipmitool (from 8.4) with the old kernel (from 8.3) keeps working? If so, I suspect a kernel bug more than a ipmitool bug. It appears to be fine with a 8.3 kernel with 8.4 userspace, so I would concur. At least in the case of a 8.3 system updated to 8.4 running for a few days. Doing a test with same hardware, which is newly rebooted into the 8.3 kernel, 8.4 userspace, in case there was something in userspace not restarted during yum upgrade, and so far fine for at least a couple hrs (while this issue seemed to pop up 5-15 min after on the 4 systems out of 4 I rebooted into the 8.4 kernel). As an update, I tested this on 4.18.0-305.12.1.el8_4.x86_64, and it appears to be fine now. Also not seeing any instances of 'ipmi_si IPI0001:00: BMC returned incorrect response,' anymore (Which was always present on Centos 5,6,7,8), so added bonus. I'm not sure if this is the same problem, but I've been having troubles with 'ipmitool sdr list' on some old Intel S5500WB and S5520UR motherboards ever since upgrading from 7.9 to 8.4/8.5 a couple of months ago. I get partial results to the command, and lots of errors. Here's one sample run: [root@ti129 ~]# ipmitool sdr list BB +1.1V IOH | 1.09 Volts | ok BB +1.1V P1 Vccp | 0.94 Volts | ok BB +1.1V P2 Vccp | 0.93 Volts | ok BB +1.5V P1 DDR3 | 1.52 Volts | ok BB +1.5V P2 DDR3 | 1.52 Volts | ok BB +1.8V AUX | 1.77 Volts | ok BB +3.3V | 3.31 Volts | ok BB +3.3V STBY | 3.28 Volts | ok BB +3.3V Vbat | 3.09 Volts | ok BB +5.0V | 5.02 Volts | ok BB +5.0V STBY | 4.97 Volts | ok BB +12.0V | 11.88 Volts | ok BB -12.0V | -11.84 Volts | ok BB +1.35v P1 MEM | disabled | ns BB +1.35v P2 MEM | no reading | ns Baseboard Temp | 28 degrees C | ok Front Panel Temp | 25 degrees C | ok IOH Therm Margin | -59 degrees C | ok Mem P1 Thrm Mrgn | -42 degrees C | ok Mem P2 Thrm Mrgn | -44 degrees C | ok System Fan 1A | 13108 RPM | ok ipmitool: ipmi_sdr_get_record() failed System Fan 3A | 13108 RPM | ok System Fan 4A | 12818 RPM | ok System Fan 1B | 16132 RPM | ok System Fan 2B | 15244 RPM | ok System Fan 3B | 15688 RPM | ok System Fan 4B | 16132 RPM | ok System Fan 5A | 12818 RPM | ok ipmitool: ipmi_sdr_get_record() failed P1 Therm Margin | -66 degrees C | ok P2 Therm Margin | -65 degrees C | ok ipmitool: ipmi_sdr_get_record() failed P2 Therm Ctrl % | no reading | ns HSBP Temperature | 25 degrees C | ok Pwr Unit Status | 0x00 | ok IPMI Watchdog | 0x00 | ok Physical Scrty | 0x00 | ok FP NMI Diag Int | 0x00 | ok SMI Timeout | 0x00 | ok ipmitool: ipmi_sdr_get_record() failed System Event | 0x00 | ok Button | 0x00 | ok ipmitool: ipmi_sdr_get_record() failed BB +1.1V P1 Vccp | 0.94 Volts | ok BB +1.1V P2 Vccp | 0.93 Volts | ok BB +1.5V P1 DDR3 | 1.52 Volts | ok BB +1.5V P2 DDR3 | 1.52 Volts | ok BB +1.8V AUX | 1.77 Volts | ok BB +3.3V | 3.31 Volts | ok BB +3.3V STBY | 3.28 Volts | ok BB +3.3V Vbat | 3.09 Volts | ok ipmitool: ipmi_sdr_get_record() failed BB +5.0V STBY | 4.97 Volts | ok BB +12.0V | 11.88 Volts | ok BB -12.0V | -11.84 Volts | ok BB +1.35v P1 MEM | disabled | ns BB +1.35v P2 MEM | disabled | ns Baseboard Temp | 28 degrees C | ok Front Panel Temp | 25 degrees C | ok IOH Therm Margin | -59 degrees C | ok Mem P1 Thrm Mrgn | -42 degrees C | ok ipmitool: ipmi_sdr_get_record() failed ipmitool: ipmi_sdr_get_record() failed System Fan 2A | 13108 RPM | ok System Fan 3A | 13108 RPM | ok System Fan 4A | 12818 RPM | ok System Fan 1B | 16132 RPM | ok System Fan 2B | 15244 RPM | ok System Fan 3B | 15688 RPM | ok System Fan 4B | 16132 RPM | ok ipmitool: ipmi_sdr_get_record() failed System Fan 5B | 15984 RPM | ok P1 Therm Margin | -66 degrees C | ok P2 Therm Margin | -65 degrees C | ok P1 Therm Ctrl % | no reading | ns P2 Therm Ctrl % | no reading | ns HSBP Temperature | 25 degrees C | ok Pwr Unit Status | 0x00 | ok IPMI Watchdog | 0x00 | ok ipmitool: ipmi_sdr_get_record() failed FP NMI Diag Int | 0x00 | ok SMI Timeout | 0x00 | ok ipmitool: ipmi_sdr_get_record() failed System Event | 0x00 | ok Button | 0x00 | ok ipmitool: ipmi_sdr_get_record() failed P2 Status | 0x00 | ok P1 VRD Hot | 0x00 | ok P2 VRD Hot | 0x00 | ok CATERR | 0x00 | ok CPU Missing | 0x00 | ok IOH Therm Trip | 0x00 | ok NM Capabilities | 0x05 | ok Drv 0 Stat | 0x00 | ok Drv 1 Stat | 0x00 | ok Drv 2 Stat | 0x00 | ok Get SDR 0037 command failed: Unspecified error Drv 0 Pres | 0x00 | ok ipmitool: ipmi_sdr_get_record() failed Drv 2 Pres | 0x00 | ok ipmitool: ipmi_sdr_get_record() failed ipmitool: ipmi_sdr_get_record() failed Get SDR 007f command failed: Unspecified error Get SDR 0089 command failed: Unspecified error Get SDR 008c command failed: Unspecified error SDR record id 0x008c: invalid length 0 And these messages are logged: [root@ti129 ~]# journalctl --no-pager --since today -g ipmi Dec 28 09:41:45 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn 5 cmd 2d, got netfn c cmd 2d Dec 28 09:41:46 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn b cmd 46 Dec 28 09:41:51 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Dec 28 09:41:54 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn b cmd 47 Dec 28 09:41:56 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Dec 28 09:41:58 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Dec 28 09:41:59 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn b cmd 47 Dec 28 09:42:02 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Dec 28 09:42:04 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn b cmd 48 Dec 28 09:42:04 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Dec 28 09:42:05 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Dec 28 09:42:07 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Dec 28 09:42:07 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Dec 28 09:42:09 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Dec 28 09:42:13 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Dec 28 09:42:14 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Dec 28 09:42:15 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Dec 28 09:42:15 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 I even got an ipmitool core dump from one host yesterday morning with this error message: free(): invalid next size (fast) Here's the gdb backtrace: backtrace #0 0x00007fab533e937f in raise () from /lib64/libc.so.6 #1 0x00007fab533d3db5 in abort () from /lib64/libc.so.6 #2 0x00007fab5342c4e7 in __libc_message () from /lib64/libc.so.6 #3 0x00007fab534335ec in malloc_printerr () from /lib64/libc.so.6 #4 0x00007fab53434f88 in _int_free () from /lib64/libc.so.6 #5 0x00005651f1e92b00 in ipmi_sdr_get_record () #6 0x00005651f1e92cc5 in ipmi_sdr_print_sdr () #7 0x00005651f1e94edd in ipmi_sdr_main () #8 0x00005651f1ec80c5 in ipmi_main () #9 0x00005651f1e8a898 in main () So are these kernel bugs or ipmitool bugs or a combination? It's pretty frustrating. I run impitool on these old Intel mobos twice per day, and it always gives lots of error messages and kernel errors. Today, I got a new error from ipmitool: malloc(): corrupted top size So that's new and exciting. It looks like there are bugs in both the kernel ipmi code and in the ipmitool user-space code. Is there any workaround for this or any hope of getting any of this fixed? Or is the response simply that these old systems must be replaced? They're still working fine otherwise... To be clear, I am seeing these problems using ipmitool-1.8.18-18.el8.x86_64 and kernel 4.18.0-348.2.1.el8_5.x86_64. Hello Andrew, if the problems started appearing since upgrade from 7.9 to 8.5, can you try ipmitool from 7.9 on the 8.5 system? I copied the ipmitool-1.8.18-9.el7_7.x86_64 binary to an 8.5 system, but it doesn't run:
[root@ti129 ~]# /tmp/ipmitool sdr list
/tmp/ipmitool: error while loading shared libraries: libreadline.so.6: cannot open shared object file: No such file or directory
I then tried to rebuild the RHEL7 version on RHEL8:
rpmbuild --rebuild ipmitool-1.8.18-9.el7_7.src.rpm
It crapped out with these errors:
/bin/sh ../../../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../.. -I../../../include -O2 -g -pipe -Wal
l -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches
-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind
-tables -fstack-clash-protection -fcf-protection -fno-strict-aliasing -Wall -Wextra -std=gnu99 -pedantic -Wformat -Wformat-nonliteral -
c -o lanplus_crypt_impl.lo lanplus_crypt_impl.c
...
lanplus_crypt_impl.c: In function 'lanplus_encrypt_aes_cbc_128':
lanplus_crypt_impl.c:167:17: error: storage size of 'ctx' isn't known
EVP_CIPHER_CTX ctx;
^~~
lanplus_crypt_impl.c:167:17: warning: unused variable 'ctx' [-Wunused-variable]
lanplus_crypt_impl.c: In function 'lanplus_decrypt_aes_cbc_128':
lanplus_crypt_impl.c:242:17: error: storage size of 'ctx' isn't known
EVP_CIPHER_CTX ctx;
^~~
lanplus_crypt_impl.c:242:17: warning: unused variable 'ctx' [-Wunused-variable]
lanplus.c: In function 'check_sol_packet_for_new_data':
lanplus.c:2587:29: warning: unused parameter 'intf' [-Wunused-parameter]
struct ipmi_intf * intf,
~~~~~~~~~~~~~~~~~~~^~~~
make[4]: *** [Makefile:454: lanplus_crypt_impl.lo] Error 1
Regards,
Andy
And FYI, when ipmitool gave that 'malloc(): corrupted top size', I got a core dump with this backtrace: Core was generated by `ipmitool sdr list'. Program terminated with signal SIGABRT, Aborted. #0 0x00007f79cfbef37f in raise () from /lib64/libc.so.6 backtrace #0 0x00007f79cfbef37f in raise () from /lib64/libc.so.6 #1 0x00007f79cfbd9db5 in abort () from /lib64/libc.so.6 #2 0x00007f79cfc324e7 in __libc_message () from /lib64/libc.so.6 #3 0x00007f79cfc395ec in malloc_printerr () from /lib64/libc.so.6 #4 0x00007f79cfc3ca55 in _int_malloc () from /lib64/libc.so.6 #5 0x00007f79cfc3e8d6 in calloc () from /lib64/libc.so.6 #6 0x00005650d6528950 in ipmi_sdr_get_record () #7 0x00005650d6528cc5 in ipmi_sdr_print_sdr () #8 0x00005650d652aedd in ipmi_sdr_main () #9 0x00005650d655e0c5 in ipmi_main () #10 0x00005650d6520898 in main () You can copy /lib64/libreadline.so.6 to the new system as well, and do yum install 'libncurses.so.5()(64bit)' 'libtinfo.so.5()(64bit)' 'libcrypto.so.10()(64bit)' After that, the old ipmitool should work. Please also run yum debuginfo-install ipmitool-1.8.18-18.el8.x86_64 after that, you will be able to get a more informative backtrace from gdb. I copied over libreadline.so.6 and libcrypto.so.10 and put them in LD_LIBRARY_PATH. With that, I ran it and got some fairly typical errors, consistent with what I see from the RHEL8 version. Here's one sample run: [root@ti129 ipmitool]# ./ipmitool sdr list BB +1.1V IOH | 1.09 Volts | ok BB +1.1V P1 Vccp | 0.94 Volts | ok BB +1.1V P2 Vccp | 0.92 Volts | ok BB +1.5V P1 DDR3 | 1.52 Volts | ok BB +1.5V P2 DDR3 | 1.52 Volts | ok BB +1.8V AUX | 1.77 Volts | ok BB +3.3V | 3.31 Volts | ok BB +3.3V STBY | 3.28 Volts | ok BB +3.3V Vbat | 3.09 Volts | ok BB +5.0V | 5.02 Volts | ok BB +5.0V STBY | 4.97 Volts | ok BB +12.0V | 11.88 Volts | ok BB -12.0V | -11.84 Volts | ok BB +1.35v P1 MEM | disabled | ns BB +1.35v P2 MEM | disabled | ns Baseboard Temp | 29 degrees C | ok Front Panel Temp | 25 degrees C | ok IOH Therm Margin | -59 degrees C | ok Mem P1 Thrm Mrgn | -42 degrees C | ok Mem P2 Thrm Mrgn | -43 degrees C | ok System Fan 1A | 13108 RPM | ok System Fan 2A | 13108 RPM | ok System Fan 3A | 13108 RPM | ok System Fan 4A | 13108 RPM | ok System Fan 1B | 15688 RPM | ok System Fan 2B | 15688 RPM | ok System Fan 3B | 15688 RPM | ok System Fan 4B | 16576 RPM | ok System Fan 5A | 12818 RPM | ok System Fan 5B | 15984 RPM | ok P1 Therm Margin | -67 degrees C | ok P2 Therm Margin | -66 degrees C | ok P1 Therm Ctrl % | no reading | ns P2 Therm Ctrl % | no reading | ns HSBP Temperature | 25 degrees C | ok Pwr Unit Status | 0x00 | ok Get SDR 0025 command failed: Unspecified error IPMI Watchdog | 0x00 | ok Physical Scrty | 0x00 | ok FP NMI Diag Int | 0x00 | ok SMI Timeout | 0x00 | ok System Event Log | 0x00 | ok System Event | 0x00 | ok Button | 0x00 | ok P1 Status | 0x00 | ok P2 Status | 0x00 | ok P1 VRD Hot | 0x00 | ok P2 VRD Hot | 0x00 | ok CATERR | 0x00 | ok CPU Missing | 0x00 | ok IOH Therm Trip | 0x00 | ok NM Capabilities | 0x05 | ok Drv 0 Stat | 0x00 | ok Drv 1 Stat | Not Readable | ns Drv 2 Stat | 0x00 | ok Drv 0 Pres | 0x00 | ok Drv 1 Pres | 0x00 | ok Get SDR 0039 command failed: Unspecified error Drv 2 Pres | 0x00 | ok Get SDR 0057 command failed: Unspecified error ipmitool: ipmi_sdr_get_record() failed ipmitool: ipmi_sdr_get_record() failed Get SDR 0089 command failed: Unspecified error SDR record id 0x008c: invalid length 0 Plus a bunch of kernel complaints in the journal: Jan 05 12:55:53 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Jan 05 12:55:59 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn b cmd 74 Jan 05 12:56:06 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Jan 05 12:56:06 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Jan 05 12:56:07 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn 9 cmd 23 Jan 05 12:56:09 ti129 kernel: ipmi_si IPI0001:00: BMC returned incorrect response, expected netfn b cmd 23, got netfn b cmd 76 No core dump. That happens only rarely. > With that, I ran it and got some fairly typical errors, consistent with what I see from the RHEL8 version.
Thanks for the test.
So, if the problem started "since upgrading from 7.9 to 8.4/8.5 a couple of months ago", can we conclude that the new kernel is the likely culprit, not ipmitool, except for the malloc / core dump errors?
Agreed. It is my belief that the kernel is the source of trouble, and in addition, ipmitool has some bugs that are tickled by the kernel defects in RHEL 8. If I run "valgrind ipmitool sdr list", I get a bunch of complaints: ==3201734== Memcheck, a memory error detector ==3201734== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==3201734== Using Valgrind-3.17.0 and LibVEX; rerun with -h for copyright info ==3201734== Command: ipmitool sdr list ==3201734== ==3201734== Syscall param ioctl(generic) points to uninitialised byte(s) ==3201734== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==3201734== by 0x19202C: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12E370: ??? (in /usr/bin/ipmitool) ==3201734== by 0x191C7F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x15FF6D: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== Address 0x1ffefff6f0 is on thread 1's stack ==3201734== ==3201734== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 15) ==3201734== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==3201734== by 0x192287: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12E370: ??? (in /usr/bin/ipmitool) ==3201734== by 0x191C7F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x15FF6D: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== ==3201734== Syscall param ioctl(generic) points to uninitialised byte(s) ==3201734== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==3201734== by 0x19202C: ??? (in /usr/bin/ipmitool) ==3201734== by 0x15E88A: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1603E0: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== Address 0x1ffefff750 is on thread 1's stack ==3201734== ==3201734== Syscall param ioctl(generic) points to uninitialised byte(s) ==3201734== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==3201734== by 0x19202C: ??? (in /usr/bin/ipmitool) ==3201734== by 0x17FC2A: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1605FC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== Address 0x1ffefff750 is on thread 1's stack ==3201734== ==3201734== Syscall param ioctl(generic) points to uninitialised byte(s) ==3201734== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==3201734== by 0x19202C: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A5BB: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12ADE9: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== Address 0x1ffefff6b0 is on thread 1's stack ==3201734== ==3201734== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 15) ==3201734== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==3201734== by 0x192287: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A5BB: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12ADE9: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== ==3201734== Syscall param ioctl(generic) points to uninitialised byte(s) ==3201734== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==3201734== by 0x19202C: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A6C7: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12ADE9: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== Address 0x1ffefff6b0 is on thread 1's stack ==3201734== ==3201734== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 14) ==3201734== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==3201734== by 0x192287: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A6C7: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12ADE9: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== ==3201734== Syscall param ioctl(generic) points to uninitialised byte(s) ==3201734== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==3201734== by 0x19202C: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A25F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A656: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12ADE9: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== Address 0x1ffefff680 is on thread 1's stack ==3201734== ==3201734== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 2) ==3201734== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==3201734== by 0x192287: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A25F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A656: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12ADE9: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== ==3201734== Syscall param ioctl(generic) points to uninitialised byte(s) ==3201734== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==3201734== by 0x19202C: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A358: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12ACA6: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== Address 0x1ffefff690 is on thread 1's stack ==3201734== Get SDR 0000 command failed: Unspecified error ==3201734== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 7) ==3201734== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==3201734== by 0x192287: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A358: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12ACA6: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== ==3201734== Syscall param ioctl(generic) points to uninitialised byte(s) ==3201734== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==3201734== by 0x19202C: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12AA2B: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12ACC4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== Address 0x1ffefff680 is on thread 1's stack ==3201734== ==3201734== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 35) ==3201734== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==3201734== by 0x192287: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12AA2B: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12ACC4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== ==3201734== Syscall param ioctl(generic) points to uninitialised byte(s) ==3201734== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==3201734== by 0x19202C: ??? (in /usr/bin/ipmitool) ==3201734== by 0x126415: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12693F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x127984: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A163: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12AD9F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== Address 0x1ffefff5e0 is on thread 1's stack ==3201734== ==3201734== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 4) ==3201734== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==3201734== by 0x192287: ??? (in /usr/bin/ipmitool) ==3201734== by 0x126415: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12693F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x127984: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A163: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12AD9F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== BB +1.1V IOH | 1.09 Volts | ok BB +1.1V P1 Vccp | 0.95 Volts | ok BB +1.1V P2 Vccp | 0.98 Volts | ok Get SDR 0004 command failed: Unspecified error BB +1.5V P1 DDR3 | 1.52 Volts | ok ipmitool: ipmi_sdr_get_record() failed BB +1.8V AUX | 1.77 Volts | ok BB +3.3V | 3.31 Volts | ok BB +3.3V STBY | 3.28 Volts | ok BB +3.3V Vbat | 3.09 Volts | ok BB +5.0V | 5.02 Volts | ok BB +5.0V STBY | 4.97 Volts | ok BB +12.0V | 11.88 Volts | ok BB -12.0V | -11.86 Volts | ok BB +1.35v P1 MEM | disabled | ns BB +1.35v P2 MEM | disabled | ns Baseboard Temp | 28 degrees C | ok Front Panel Temp | 25 degrees C | ok IOH Therm Margin | -59 degrees C | ok Mem P1 Thrm Mrgn | -42 degrees C | ok ipmitool: ipmi_sdr_get_record() failed System Fan 1A | 13108 RPM | ok ==3201734== Syscall param ioctl(generic) points to uninitialised byte(s) ==3201734== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==3201734== by 0x19202C: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A25F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12AB40: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12ACC4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== Address 0x1ffefff650 is on thread 1's stack ==3201734== ==3201734== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 2) ==3201734== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==3201734== by 0x192287: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A25F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12AB40: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12ACC4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== System Fan 2A | 12586 RPM | ok System Fan 3A | 13108 RPM | ok System Fan 4A | 13108 RPM | ok System Fan 1B | 16576 RPM | ok System Fan 2B | 16576 RPM | ok System Fan 3B | 16576 RPM | ok System Fan 4B | 15688 RPM | ok System Fan 5 | 12818 RPM | ok BB +1.1V P1 Vccp | 0.94 Volts | ok BB +1.1V P2 Vccp | 0.92 Volts | ok BB +1.5V P1 DDR3 | 1.52 Volts | ok BB +1.5V P2 DDR3 | 1.52 Volts | ok BB +1.8V AUX | 1.77 Volts | ok ipmitool: ipmi_sdr_get_record() failed BB +3.3V STBY | 3.28 Volts | ok BB +3.3V Vbat | 3.09 Volts | ok BB +5.0V | no reading | ns BB +5.0V STBY | 4.97 Volts | ok BB +12.0V | 11.88 Volts | ok BB -12.0V | -11.86 Volts | ok BB +1.35v P1 MEM | disabled | ns BB +1.35v P2 MEM | disabled | ns Baseboard Temp | 29 degrees C | ok ipmitool: ipmi_sdr_get_record() failed IOH Therm Margin | -59 degrees C | ok Mem P1 Thrm Mrgn | -42 degrees C | ok Mem P2 Thrm Mrgn | -44 degrees C | ok System Fan 1A | 13108 RPM | ok ipmitool: ipmi_sdr_get_record() failed System Fan 3A | 13108 RPM | ok System Fan 4A | 13108 RPM | ok System Fan 1B | 16576 RPM | ok System Fan 2B | 16576 RPM | ok System Fan 3B | 16132 RPM | ok System Fan 4B | 15688 RPM | ok System Fan 5A | 12818 RPM | ok System Fan 5B | 15984 RPM | ok P1 Therm Margin | -65 degrees C | ok P2 Therm Margin | -64 degrees C | ok ipmitool: ipmi_sdr_get_record() failed P2 Therm Ctrl % | no reading | ns ==3201734== Syscall param ioctl(generic) points to uninitialised byte(s) ==3201734== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==3201734== by 0x19202C: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1263A4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12693F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x127984: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A163: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12AD9F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== Address 0x1ffefff5e0 is on thread 1's stack ==3201734== ==3201734== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 4) ==3201734== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==3201734== by 0x192287: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1263A4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12693F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x127984: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12A163: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12AD9F: ??? (in /usr/bin/ipmitool) ==3201734== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==3201734== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==3201734== by 0x122897: ??? (in /usr/bin/ipmitool) ==3201734== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==3201734== HSBP Temperature | 25 degrees C | ok Pwr Unit Status | 0x00 | ok IPMI Watchdog | 0x00 | ok Physical Scrty | 0x00 | ok FP NMI Diag Int | 0x00 | ok SMI Timeout | 0x00 | ok System Event Log | Not Readable | ns System Event | 0x00 | ok Button | 0x00 | ok P1 Status | 0x00 | ok ipmitool: ipmi_sdr_get_record() failed P1 VRD Hot | 0x00 | ok P2 VRD Hot | 0x00 | ok CATERR | 0x00 | ok CPU Missing | 0x00 | ok IOH Therm Trip | 0x00 | ok NM Capabilities | 0x05 | ok Drv 0 Stat | 0x00 | ok Drv 1 Stat | 0x00 | ok Drv 2 Stat | 0x00 | ok Drv 0 Pres | 0x00 | ok Drv 1 Pres | 0x00 | ok Drv 2 Pres | 0x00 | ok ipmitool: ipmi_sdr_get_record() failed Get SDR 0045 command failed: Unspecified error ipmitool: ipmi_sdr_get_record() failed ipmitool: ipmi_sdr_get_record() failed SDR record id 0x008c: invalid length 0 ==3201734== ==3201734== HEAP SUMMARY: ==3201734== in use at exit: 0 bytes in 0 blocks ==3201734== total heap usage: 328 allocs, 328 frees, 12,101 bytes allocated ==3201734== ==3201734== All heap blocks were freed -- no leaks are possible ==3201734== ==3201734== Use --track-origins=yes to see where uninitialised values come from ==3201734== For lists of detected and suppressed errors, rerun with: -s ==3201734== ERROR SUMMARY: 1183 errors from 20 contexts (suppressed: 0 from 0) Note: I am also getting valgrind errors on a brand new Supermicro X11SCM-F motherboard. It seems that something in the code is calling memcpy on overlapping memory regions. That is not allowed: ==280687== Memcheck, a memory error detector ==280687== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==280687== Using Valgrind-3.17.0 and LibVEX; rerun with -h for copyright info ==280687== Command: ipmitool sdr list ==280687== ==280687== Syscall param ioctl(generic) points to uninitialised byte(s) ==280687== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280687== by 0x19202C: ??? (in /usr/bin/ipmitool) ==280687== by 0x12E370: ??? (in /usr/bin/ipmitool) ==280687== by 0x191C7F: ??? (in /usr/bin/ipmitool) ==280687== by 0x15FF6D: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== Address 0x1ffeffff80 is on thread 1's stack ==280687== ==280687== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 15) ==280687== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280687== by 0x192287: ??? (in /usr/bin/ipmitool) ==280687== by 0x12E370: ??? (in /usr/bin/ipmitool) ==280687== by 0x191C7F: ??? (in /usr/bin/ipmitool) ==280687== by 0x15FF6D: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== ==280687== Syscall param ioctl(generic) points to uninitialised byte(s) ==280687== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280687== by 0x19202C: ??? (in /usr/bin/ipmitool) ==280687== by 0x15E88A: ??? (in /usr/bin/ipmitool) ==280687== by 0x1603E0: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== Address 0x1ffeffffe0 is on thread 1's stack ==280687== ==280687== Syscall param ioctl(generic) points to uninitialised byte(s) ==280687== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280687== by 0x19202C: ??? (in /usr/bin/ipmitool) ==280687== by 0x17FC2A: ??? (in /usr/bin/ipmitool) ==280687== by 0x1605FC: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== Address 0x1ffeffffe0 is on thread 1's stack ==280687== ==280687== Syscall param ioctl(generic) points to uninitialised byte(s) ==280687== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280687== by 0x19202C: ??? (in /usr/bin/ipmitool) ==280687== by 0x12A5BB: ??? (in /usr/bin/ipmitool) ==280687== by 0x12ADE9: ??? (in /usr/bin/ipmitool) ==280687== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==280687== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== Address 0x1ffeffff40 is on thread 1's stack ==280687== ==280687== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 15) ==280687== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280687== by 0x192287: ??? (in /usr/bin/ipmitool) ==280687== by 0x12A5BB: ??? (in /usr/bin/ipmitool) ==280687== by 0x12ADE9: ??? (in /usr/bin/ipmitool) ==280687== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==280687== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== ==280687== Syscall param ioctl(generic) points to uninitialised byte(s) ==280687== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280687== by 0x19202C: ??? (in /usr/bin/ipmitool) ==280687== by 0x12A6C7: ??? (in /usr/bin/ipmitool) ==280687== by 0x12ADE9: ??? (in /usr/bin/ipmitool) ==280687== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==280687== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== Address 0x1ffeffff40 is on thread 1's stack ==280687== ==280687== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 14) ==280687== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280687== by 0x192287: ??? (in /usr/bin/ipmitool) ==280687== by 0x12A6C7: ??? (in /usr/bin/ipmitool) ==280687== by 0x12ADE9: ??? (in /usr/bin/ipmitool) ==280687== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==280687== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== ==280687== Syscall param ioctl(generic) points to uninitialised byte(s) ==280687== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280687== by 0x19202C: ??? (in /usr/bin/ipmitool) ==280687== by 0x12A25F: ??? (in /usr/bin/ipmitool) ==280687== by 0x12A656: ??? (in /usr/bin/ipmitool) ==280687== by 0x12ADE9: ??? (in /usr/bin/ipmitool) ==280687== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==280687== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== Address 0x1ffeffff10 is on thread 1's stack ==280687== ==280687== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 2) ==280687== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280687== by 0x192287: ??? (in /usr/bin/ipmitool) ==280687== by 0x12A25F: ??? (in /usr/bin/ipmitool) ==280687== by 0x12A656: ??? (in /usr/bin/ipmitool) ==280687== by 0x12ADE9: ??? (in /usr/bin/ipmitool) ==280687== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==280687== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== ==280687== Syscall param ioctl(generic) points to uninitialised byte(s) ==280687== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280687== by 0x19202C: ??? (in /usr/bin/ipmitool) ==280687== by 0x12A358: ??? (in /usr/bin/ipmitool) ==280687== by 0x12ACA6: ??? (in /usr/bin/ipmitool) ==280687== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==280687== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== Address 0x1ffeffff20 is on thread 1's stack ==280687== ==280687== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 7) ==280687== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280687== by 0x192287: ??? (in /usr/bin/ipmitool) ==280687== by 0x12A358: ??? (in /usr/bin/ipmitool) ==280687== by 0x12ACA6: ??? (in /usr/bin/ipmitool) ==280687== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==280687== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== ==280687== Syscall param ioctl(generic) points to uninitialised byte(s) ==280687== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280687== by 0x19202C: ??? (in /usr/bin/ipmitool) ==280687== by 0x12AA2B: ??? (in /usr/bin/ipmitool) ==280687== by 0x12ACC4: ??? (in /usr/bin/ipmitool) ==280687== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==280687== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== Address 0x1ffeffff10 is on thread 1's stack ==280687== ==280687== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 35) ==280687== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280687== by 0x192287: ??? (in /usr/bin/ipmitool) ==280687== by 0x12AA2B: ??? (in /usr/bin/ipmitool) ==280687== by 0x12ACC4: ??? (in /usr/bin/ipmitool) ==280687== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==280687== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== ==280687== Syscall param ioctl(generic) points to uninitialised byte(s) ==280687== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280687== by 0x19202C: ??? (in /usr/bin/ipmitool) ==280687== by 0x126415: ??? (in /usr/bin/ipmitool) ==280687== by 0x12693F: ??? (in /usr/bin/ipmitool) ==280687== by 0x127984: ??? (in /usr/bin/ipmitool) ==280687== by 0x12A163: ??? (in /usr/bin/ipmitool) ==280687== by 0x12AD9F: ??? (in /usr/bin/ipmitool) ==280687== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==280687== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== Address 0x1ffefffe70 is on thread 1's stack ==280687== CPU Temp | no reading | ns ==280687== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 3) ==280687== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280687== by 0x192287: ??? (in /usr/bin/ipmitool) ==280687== by 0x126415: ??? (in /usr/bin/ipmitool) ==280687== by 0x12693F: ??? (in /usr/bin/ipmitool) ==280687== by 0x127984: ??? (in /usr/bin/ipmitool) ==280687== by 0x12A163: ??? (in /usr/bin/ipmitool) ==280687== by 0x12AD9F: ??? (in /usr/bin/ipmitool) ==280687== by 0x12CEDC: ??? (in /usr/bin/ipmitool) ==280687== by 0x1600C4: ??? (in /usr/bin/ipmitool) ==280687== by 0x122897: ??? (in /usr/bin/ipmitool) ==280687== by 0x5D7B492: (below main) (in /usr/lib64/libc-2.28.so) ==280687== PCH Temp | 28 degrees C | ok System Temp | 22 degrees C | ok Peripheral Temp | 26 degrees C | ok VcpuVRM Temp | 29 degrees C | ok M2NVMeSSD Temp1 | no reading | ns M2NVMeSSD Temp2 | no reading | ns DIMMA1 Temp | no reading | ns DIMMA2 Temp | 25 degrees C | ok DIMMB1 Temp | no reading | ns DIMMB2 Temp | 26 degrees C | ok FAN1 | 8400 RPM | ok FAN2 | 8400 RPM | ok FAN3 | 9000 RPM | ok FAN4 | no reading | ns FANA | 9300 RPM | ok FANB | no reading | ns 12V | 11.94 Volts | ok 5VCC | 5.15 Volts | ok 3.3VCC | 3.28 Volts | ok VBAT | 0x04 | ok Vcpu | 1.07 Volts | ok Vdimm | 1.21 Volts | ok VCC_SA | 1.05 Volts | ok 5VSB | 5.14 Volts | ok 3.3VSB | 3.28 Volts | ok VCC_IO | 0.95 Volts | ok 1.8V_PCH | 1.78 Volts | ok 1.2V_BMC | 1.20 Volts | ok 1.05V_PCH | 1.05 Volts | ok Chassis Intru | 0x01 | ok ==280687== ==280687== HEAP SUMMARY: ==280687== in use at exit: 0 bytes in 0 blocks ==280687== total heap usage: 80 allocs, 80 frees, 3,932 bytes allocated ==280687== ==280687== All heap blocks were freed -- no leaks are possible ==280687== ==280687== Use --track-origins=yes to see where uninitialised values come from ==280687== For lists of detected and suppressed errors, rerun with: -s ==280687== ERROR SUMMARY: 279 errors from 16 contexts (suppressed: 0 from 0) With debuginfo: ==280848== Memcheck, a memory error detector ==280848== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==280848== Using Valgrind-3.17.0 and LibVEX; rerun with -h for copyright info ==280848== Command: ipmitool sdr list ==280848== ==280848== Syscall param ioctl(generic) points to uninitialised byte(s) ==280848== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280848== by 0x19202C: ipmi_openipmi_send_cmd (open.c:369) ==280848== by 0x12E370: UnknownInlinedFun (ipmi_sel.c:318) ==280848== by 0x12E370: ipmi_get_oem (ipmi_sel.c:290) ==280848== by 0x191C7F: ipmi_openipmi_open (open.c:140) ==280848== by 0x15FF6D: ipmi_main (ipmi_main.c:890) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== Address 0x1ffeffff80 is on thread 1's stack ==280848== in frame #1, created by ipmi_openipmi_send_cmd (open.c:169) ==280848== ==280848== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 15) ==280848== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280848== by 0x192287: UnknownInlinedFun (string_fortified.h:40) ==280848== by 0x192287: ipmi_openipmi_send_cmd (open.c:428) ==280848== by 0x12E370: UnknownInlinedFun (ipmi_sel.c:318) ==280848== by 0x12E370: ipmi_get_oem (ipmi_sel.c:290) ==280848== by 0x191C7F: ipmi_openipmi_open (open.c:140) ==280848== by 0x15FF6D: ipmi_main (ipmi_main.c:890) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== ==280848== Syscall param ioctl(generic) points to uninitialised byte(s) ==280848== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280848== by 0x19202C: ipmi_openipmi_send_cmd (open.c:369) ==280848== by 0x15E88A: picmg_discover (ipmi_picmg.c:2358) ==280848== by 0x1603E0: ipmi_main (ipmi_main.c:901) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== Address 0x1ffeffffe0 is on thread 1's stack ==280848== in frame #1, created by ipmi_openipmi_send_cmd (open.c:169) ==280848== ==280848== Syscall param ioctl(generic) points to uninitialised byte(s) ==280848== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280848== by 0x19202C: ipmi_openipmi_send_cmd (open.c:369) ==280848== by 0x17FC2A: vita_discover (ipmi_vita.c:191) ==280848== by 0x1605FC: ipmi_main (ipmi_main.c:903) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== Address 0x1ffeffffe0 is on thread 1's stack ==280848== in frame #1, created by ipmi_openipmi_send_cmd (open.c:169) ==280848== ==280848== Syscall param ioctl(generic) points to uninitialised byte(s) ==280848== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280848== by 0x19202C: ipmi_openipmi_send_cmd (open.c:369) ==280848== by 0x12A5BB: ipmi_sdr_start (ipmi_sdr.c:2844) ==280848== by 0x12ADE9: ipmi_sdr_print_sdr (ipmi_sdr.c:2676) ==280848== by 0x12CEDC: ipmi_sdr_main (ipmi_sdr.c:4652) ==280848== by 0x1600C4: ipmi_main (ipmi_main.c:1009) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== Address 0x1ffeffff40 is on thread 1's stack ==280848== in frame #1, created by ipmi_openipmi_send_cmd (open.c:169) ==280848== ==280848== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 15) ==280848== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280848== by 0x192287: UnknownInlinedFun (string_fortified.h:40) ==280848== by 0x192287: ipmi_openipmi_send_cmd (open.c:428) ==280848== by 0x12A5BB: ipmi_sdr_start (ipmi_sdr.c:2844) ==280848== by 0x12ADE9: ipmi_sdr_print_sdr (ipmi_sdr.c:2676) ==280848== by 0x12CEDC: ipmi_sdr_main (ipmi_sdr.c:4652) ==280848== by 0x1600C4: ipmi_main (ipmi_main.c:1009) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== ==280848== Syscall param ioctl(generic) points to uninitialised byte(s) ==280848== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280848== by 0x19202C: ipmi_openipmi_send_cmd (open.c:369) ==280848== by 0x12A6C7: ipmi_sdr_start (ipmi_sdr.c:2887) ==280848== by 0x12ADE9: ipmi_sdr_print_sdr (ipmi_sdr.c:2676) ==280848== by 0x12CEDC: ipmi_sdr_main (ipmi_sdr.c:4652) ==280848== by 0x1600C4: ipmi_main (ipmi_main.c:1009) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== Address 0x1ffeffff40 is on thread 1's stack ==280848== in frame #1, created by ipmi_openipmi_send_cmd (open.c:169) ==280848== ==280848== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 14) ==280848== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280848== by 0x192287: UnknownInlinedFun (string_fortified.h:40) ==280848== by 0x192287: ipmi_openipmi_send_cmd (open.c:428) ==280848== by 0x12A6C7: ipmi_sdr_start (ipmi_sdr.c:2887) ==280848== by 0x12ADE9: ipmi_sdr_print_sdr (ipmi_sdr.c:2676) ==280848== by 0x12CEDC: ipmi_sdr_main (ipmi_sdr.c:4652) ==280848== by 0x1600C4: ipmi_main (ipmi_main.c:1009) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== ==280848== Syscall param ioctl(generic) points to uninitialised byte(s) ==280848== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280848== by 0x19202C: ipmi_openipmi_send_cmd (open.c:369) ==280848== by 0x12A25F: ipmi_sdr_get_reservation (ipmi_sdr.c:2802) ==280848== by 0x12A656: ipmi_sdr_start (ipmi_sdr.c:2952) ==280848== by 0x12ADE9: ipmi_sdr_print_sdr (ipmi_sdr.c:2676) ==280848== by 0x12CEDC: ipmi_sdr_main (ipmi_sdr.c:4652) ==280848== by 0x1600C4: ipmi_main (ipmi_main.c:1009) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== Address 0x1ffeffff10 is on thread 1's stack ==280848== in frame #1, created by ipmi_openipmi_send_cmd (open.c:169) ==280848== ==280848== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 2) ==280848== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280848== by 0x192287: UnknownInlinedFun (string_fortified.h:40) ==280848== by 0x192287: ipmi_openipmi_send_cmd (open.c:428) ==280848== by 0x12A25F: ipmi_sdr_get_reservation (ipmi_sdr.c:2802) ==280848== by 0x12A656: ipmi_sdr_start (ipmi_sdr.c:2952) ==280848== by 0x12ADE9: ipmi_sdr_print_sdr (ipmi_sdr.c:2676) ==280848== by 0x12CEDC: ipmi_sdr_main (ipmi_sdr.c:4652) ==280848== by 0x1600C4: ipmi_main (ipmi_main.c:1009) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== ==280848== Syscall param ioctl(generic) points to uninitialised byte(s) ==280848== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280848== by 0x19202C: ipmi_openipmi_send_cmd (open.c:369) ==280848== by 0x12A358: ipmi_sdr_get_header (ipmi_sdr.c:797) ==280848== by 0x12A358: ipmi_sdr_get_next_header (ipmi_sdr.c:880) ==280848== by 0x12ACA6: ipmi_sdr_print_sdr (ipmi_sdr.c:2694) ==280848== by 0x12CEDC: ipmi_sdr_main (ipmi_sdr.c:4652) ==280848== by 0x1600C4: ipmi_main (ipmi_main.c:1009) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== Address 0x1ffeffff20 is on thread 1's stack ==280848== in frame #1, created by ipmi_openipmi_send_cmd (open.c:169) ==280848== ==280848== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 7) ==280848== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280848== by 0x192287: UnknownInlinedFun (string_fortified.h:40) ==280848== by 0x192287: ipmi_openipmi_send_cmd (open.c:428) ==280848== by 0x12A358: ipmi_sdr_get_header (ipmi_sdr.c:797) ==280848== by 0x12A358: ipmi_sdr_get_next_header (ipmi_sdr.c:880) ==280848== by 0x12ACA6: ipmi_sdr_print_sdr (ipmi_sdr.c:2694) ==280848== by 0x12CEDC: ipmi_sdr_main (ipmi_sdr.c:4652) ==280848== by 0x1600C4: ipmi_main (ipmi_main.c:1009) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== ==280848== Syscall param ioctl(generic) points to uninitialised byte(s) ==280848== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280848== by 0x19202C: ipmi_openipmi_send_cmd (open.c:369) ==280848== by 0x12AA2B: ipmi_sdr_get_record (ipmi_sdr.c:3031) ==280848== by 0x12ACC4: ipmi_sdr_print_sdr (ipmi_sdr.c:2698) ==280848== by 0x12CEDC: ipmi_sdr_main (ipmi_sdr.c:4652) ==280848== by 0x1600C4: ipmi_main (ipmi_main.c:1009) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== Address 0x1ffeffff10 is on thread 1's stack ==280848== in frame #1, created by ipmi_openipmi_send_cmd (open.c:169) ==280848== ==280848== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 35) ==280848== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280848== by 0x192287: UnknownInlinedFun (string_fortified.h:40) ==280848== by 0x192287: ipmi_openipmi_send_cmd (open.c:428) ==280848== by 0x12AA2B: ipmi_sdr_get_record (ipmi_sdr.c:3031) ==280848== by 0x12ACC4: ipmi_sdr_print_sdr (ipmi_sdr.c:2698) ==280848== by 0x12CEDC: ipmi_sdr_main (ipmi_sdr.c:4652) ==280848== by 0x1600C4: ipmi_main (ipmi_main.c:1009) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== ==280848== Syscall param ioctl(generic) points to uninitialised byte(s) ==280848== at 0x5E4B62B: ioctl (in /usr/lib64/libc-2.28.so) ==280848== by 0x19202C: ipmi_openipmi_send_cmd (open.c:369) ==280848== by 0x126415: ipmi_sdr_get_sensor_reading_ipmb (ipmi_sdr.c:601) ==280848== by 0x12693F: ipmi_sdr_read_sensor_value (ipmi_sdr.c:1434) ==280848== by 0x12693F: ipmi_sdr_read_sensor_value (ipmi_sdr.c:1398) ==280848== by 0x127984: ipmi_sdr_print_sensor_fc (ipmi_sdr.c:1528) ==280848== by 0x12A163: ipmi_sdr_print_rawentry (ipmi_sdr.c:2553) ==280848== by 0x12AD9F: ipmi_sdr_print_sdr (ipmi_sdr.c:2760) ==280848== by 0x12CEDC: ipmi_sdr_main (ipmi_sdr.c:4652) ==280848== by 0x1600C4: ipmi_main (ipmi_main.c:1009) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== Address 0x1ffefffe70 is on thread 1's stack ==280848== in frame #1, created by ipmi_openipmi_send_cmd (open.c:169) ==280848== CPU Temp | no reading | ns ==280848== Source and destination overlap in memcpy_chk(0x3f45c1, 0x3f45c2, 3) ==280848== at 0x4C41260: __memcpy_chk (vg_replace_strmem.c:1617) ==280848== by 0x192287: UnknownInlinedFun (string_fortified.h:40) ==280848== by 0x192287: ipmi_openipmi_send_cmd (open.c:428) ==280848== by 0x126415: ipmi_sdr_get_sensor_reading_ipmb (ipmi_sdr.c:601) ==280848== by 0x12693F: ipmi_sdr_read_sensor_value (ipmi_sdr.c:1434) ==280848== by 0x12693F: ipmi_sdr_read_sensor_value (ipmi_sdr.c:1398) ==280848== by 0x127984: ipmi_sdr_print_sensor_fc (ipmi_sdr.c:1528) ==280848== by 0x12A163: ipmi_sdr_print_rawentry (ipmi_sdr.c:2553) ==280848== by 0x12AD9F: ipmi_sdr_print_sdr (ipmi_sdr.c:2760) ==280848== by 0x12CEDC: ipmi_sdr_main (ipmi_sdr.c:4652) ==280848== by 0x1600C4: ipmi_main (ipmi_main.c:1009) ==280848== by 0x122897: main (ipmitool.c:136) ==280848== PCH Temp | 28 degrees C | ok System Temp | 23 degrees C | ok Peripheral Temp | 26 degrees C | ok VcpuVRM Temp | 28 degrees C | ok M2NVMeSSD Temp1 | no reading | ns M2NVMeSSD Temp2 | no reading | ns DIMMA1 Temp | no reading | ns DIMMA2 Temp | 25 degrees C | ok DIMMB1 Temp | no reading | ns DIMMB2 Temp | 26 degrees C | ok FAN1 | 8500 RPM | ok FAN2 | 8400 RPM | ok FAN3 | 9000 RPM | ok FAN4 | no reading | ns FANA | 9300 RPM | ok FANB | no reading | ns 12V | 11.94 Volts | ok 5VCC | 5.15 Volts | ok 3.3VCC | 3.28 Volts | ok VBAT | 0x04 | ok Vcpu | 0.04 Volts | ok Vdimm | 1.20 Volts | ok VCC_SA | 1.05 Volts | ok 5VSB | 5.14 Volts | ok 3.3VSB | 3.28 Volts | ok VCC_IO | 0.95 Volts | ok 1.8V_PCH | 1.77 Volts | ok 1.2V_BMC | 1.20 Volts | ok 1.05V_PCH | 1.05 Volts | ok Chassis Intru | 0x01 | ok ==280848== ==280848== HEAP SUMMARY: ==280848== in use at exit: 0 bytes in 0 blocks ==280848== total heap usage: 80 allocs, 80 frees, 3,932 bytes allocated ==280848== ==280848== All heap blocks were freed -- no leaks are possible ==280848== ==280848== Use --track-origins=yes to see where uninitialised values come from ==280848== For lists of detected and suppressed errors, rerun with: -s ==280848== ERROR SUMMARY: 279 errors from 16 contexts (suppressed: 0 from 0) (In reply to Andrew Schorr from comment #14) > Agreed. It is my belief that the kernel is the source of trouble, and in > addition, ipmitool has some bugs that are tickled by the kernel defects in > RHEL 8. Could you perhaps try to contact the BMC over IP to avoid going through the kernel IPMI driver? That's an interesting idea. Before addressing that, I will note that the valgrind memcpy
errors seem to pertain to these memmove calls in src/plugins/open/open.c:ipmi_openipmi_send_cmd():
/* save response data for caller */
if (rsp.ccode == 0 && rsp.data_len > 0) {
memmove(rsp.data, rsp.data + 1, rsp.data_len);
rsp.data[rsp.data_len] = 0;
}
I have no idea why valgrind is flagging them as errors, since overlapping areas
should be OK with memmove. In /usr/include/bits/string_fortified.h, that gets
converted to a call to __builtin___memmove_chk:
__fortify_function void *
__NTH (memmove (void *__dest, const void *__src, size_t __len))
{
return __builtin___memmove_chk (__dest, __src, __len, __bos0 (__dest));
}
Why does that trigger a valgrind complaint about memcpy? At this point, it seems one would
have to dive into the gcc logic.
I tried using "ipmitool -I lanplus" to run the "sdr list" command, and it does
at least eliminate the kernel complaints. But it's really slow,
and it terminates like this:
Drv 0 Stat | 0x00 | ok
Drv 1 Stat | 0x00 | ok
Drv 2 Stat | 0x00 | ok
Drv 0 Pres | 0x00 | ok
Drv 1 Pres | 0x00 | ok
Drv 2 Pres | 0x00 | ok
SDR record id 0x008c: invalid length 0
So that still doesn't seem quite normal, and the speed is a problem.
There are also no valgrind complaints when using "-I lanplus".
And the results are not consistent when using lanplus. Even more entries seem to be missing. To take one example, when I run it directly on a certain host, I get 84 records of output in 23 seconds. When using lanplus from a remote host, it takes 130 seconds, and I get 57 records of output. FYI, here's the backtrace from that most recent core dump with debuginfo installed:
Reading symbols from /usr/bin/ipmitool...Reading symbols from /usr/lib/debug/usr/bin/ipmitool-1.8.18-18.el8.x86_64.debug...done.
done.
[New LWP 3090452]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Core was generated by `ipmitool sdr list'.
Program terminated with signal SIGABRT, Aborted.
#0 0x00007f79cfbef37f in raise () from /lib64/libc.so.6
Missing separate debuginfos, use: yum debuginfo-install glibc-2.28-164.el8.x86_64 ncurses-libs-6.1-9.20180224.el8.x86_64 openssl-libs-1.1.1k-5.el8_5.x86_64 readline-7.0-10.el8.x86_64 zlib-1.2.11-17.el8.x86_64
(gdb) bt
#0 0x00007f79cfbef37f in raise () from /lib64/libc.so.6
#1 0x00007f79cfbd9db5 in abort () from /lib64/libc.so.6
#2 0x00007f79cfc324e7 in __libc_message () from /lib64/libc.so.6
#3 0x00007f79cfc395ec in malloc_printerr () from /lib64/libc.so.6
#4 0x00007f79cfc3ca55 in _int_malloc () from /lib64/libc.so.6
#5 0x00007f79cfc3e8d6 in calloc () from /lib64/libc.so.6
#6 0x00005650d6528950 in ipmi_sdr_get_record (intf=intf@entry=0x5650d67eec60 <ipmi_open_intf>,
header=header@entry=0x5650d67efd20 <sdr_rs>, itr=0x5650d81ce2e0) at ipmi_sdr.c:2985
#7 0x00005650d6528cc5 in ipmi_sdr_print_sdr (intf=intf@entry=0x5650d67eec60 <ipmi_open_intf>, type=type@entry=254 '\376')
at ipmi_sdr.c:2698
#8 0x00005650d652aedd in ipmi_sdr_main (intf=0x5650d67eec60 <ipmi_open_intf>, argc=1, argv=0x7ffe6e27c248) at ipmi_sdr.c:4652
#9 0x00005650d655e0c5 in ipmi_main (argc=<optimized out>, argv=<optimized out>, cmdlist=0x5650d67e2020 <ipmitool_cmd_list>,
intflist=0x0) at ipmi_main.c:1009
#10 0x00005650d6520898 in main (argc=<optimized out>, argv=<optimized out>) at ipmitool.c:136
(gdb)
After evaluating this issue, there are no plans to address it further or fix it in an upcoming release. Therefore, it is being closed. If plans change such that this issue will be fixed in an upcoming release, then the bug can be reopened. |