Bug 249179

After update to Kernel 2.6.22.1-27.fc7 form 2.6.21-1.3228.fc7 pppoe does not
work correct. 

I have 2 the-Devices (eth0 and eth1) bridged together to a bridging device br0.
eth0 is a 8139too and eth1 a via-rhine. pppoe uses the br0-device as eth-device.

With 2.6.21-1.3228.fc7 everything works fine (ADSL connects and works as
wanted), but with 2.6.22.1-27.fc7 pppoe connects to the provider (login ok, PAP
ok, ip assign ok, assign default gateway ok, route ok), but if I try transmit or
receive data over ppp0 there is always a error message in /var/log/messages and
no data can be received (i.e. if I try to browse a web page).

This is the error in /var/log/messages (it appears very often):
pppoe[3484]: Bogus PPPoE length field (48)

Back to 2.6.21-1.3228.fc7 everything is ok.

/etc/sysconfig/network-scripts/ifcfg-ppp0:
ONBOOT=yes
USERCTL=no
IPV6INIT=no
PEERDNS=no
TYPE=xDSL
DEVICE=ppp0
BOOTPROTO=dialup
PIDFILE=/var/run/pppoe-adsl.pid
FIREWALL=NONE
PING=.
PPPOE_TIMEOUT=80
LCP_FAILURE=3
LCP_INTERVAL=20
CLAMPMSS=1452
CONNECT_POLL=6
CONNECT_TIMEOUT=0
RETRYTIMEOUT=5
PERSIST=yes
SYNCHRONOUS=no
DEFROUTE=yes
USER=xxx
ETH=br0
PROVIDER=xxx
DEMAND=no
MTU=1492
MRU=1492

/etc/sysconfig/network-scripts/ifcfg-eth0:
# Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=none
HWADDR=xx:xx:xx:xx:xx:xx
BRIDGE=br0
TYPE=Ethernet

/etc/sysconfig/network-scripts/ifcfg-eth1:
# VIA Technologies, Inc. VT6102 [Rhine-II]
DEVICE=eth1
ONBOOT=yes
BOOTPROTO=none
HWADDR=xx:xx:xx:xx:xx:xx
BRIDGE="br0"
TYPE=Ethernet

/etc/sysconfig/network-scripts/ifcfg-br0:
DEVICE=br0
ONBOOT=yes
TYPE=Bridge
IPADDR=192.168.0.99
NETMASK=255.255.255.0
NETWORK=192.168.0.0
BROADCAST=192.168.0.255
IPV6INIT=no
BOOTPROTO=none
USERCTL=no
PEERDNS=no
STP=on
NOZEROCONF=no


How reproducible:
Every time booting with 2.6.22.1-27.fc7.

Steps to Reproduce:
Boot the system with 2.6.22.1-27.fc7.