Bug 36078

Summary: Installer hangs when loading aic7xxx module
Product: [Retired] Red Hat Linux Reporter: mkp
Component: anacondaAssignee: Brent Fox <bfox>
Status: CLOSED DUPLICATE QA Contact: Brock Organ <borgan>
Severity: medium Docs Contact:
Priority: medium    
Version: 7.1CC: jpye
Target Milestone: ---   
Target Release: ---   
Hardware: i386   
OS: Linux   
Whiteboard:
Fixed In Version: Doc Type: Bug Fix
Doc Text:
Story Points: ---
Clone Of: Environment:
Last Closed: 2001-04-19 16:45:54 UTC Type: ---
Regression: --- Mount Type: ---
Documentation: --- CRM:
Verified Versions: Category: ---
oVirt Team: --- RHEL 7.3 requirements from Atomic Host:
Cloudforms Team: --- Target Upstream Version:
Embargoed:

Description mkp 2001-04-16 20:10:52 UTC 
From Bugzilla Helper:
User-Agent: Mozilla/4.76 [en] (X11; U; Linux 2.4.3-XFS i686)


On an intel L440GX+ reference platform with no disks attached to the
internal controller, aic7xxx.o goes into an endless loop trying to reset
the SCSI-buses.  The module works fine when loaded manually from the
command line.

Reproducible: Always
Steps to Reproduce:
1. Unplug disks from internal controller
2. Boot RH7.1 without specifying noprobe as argument

	

00:00.0 Host bridge: Intel Corporation 440GX - 82443GX Host bridge
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
	Latency: 64
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 1.0
		Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corporation 440GX - 82443GX AGP bridge (prog-if
00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=02, sec-latency=64
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f4200000-f42fffff
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B+

00:0c.0 SCSI storage controller: Adaptec 7896
	Subsystem: Adaptec: Unknown device 0053
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 19
	BIST result: 00
	Region 0: I/O ports at 2000 [size=256]
	Region 1: Memory at f4100000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.1 SCSI storage controller: Adaptec 7896
	Subsystem: Adaptec: Unknown device 0053
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 19
	BIST result: 00
	Region 0: I/O ports at 2400 [size=256]
	Region 1: Memory at f4101000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0d.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c895
(rev 02)
	Subsystem: Hewlett-Packard Company: Unknown device 10f5
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 64 (7500ns min, 16000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 2800 [size=256]
	Region 1: Memory at f4105000 (32-bit, non-prefetchable) [size=256]
	Region 2: Memory at f4102000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=64K]

00:0e.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100]
(rev 08)
	Subsystem: Intel Corporation 82559 Fast Ethernet LAN on Motherboard
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 64 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at f4103000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at 2c00 [size=64]
	Region 2: Memory at f4000000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at <unassigned> [disabled] [size=1M]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

00:12.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 0

00:12.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at 2c60 [size=16]

00:12.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin D routed to IRQ 21
	Region 4: I/O ports at 2c40 [size=32]

00:12.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Interrupt: pin ? routed to IRQ 9

00:14.0 VGA compatible controller: Cirrus Logic GD 5480 (rev 23) (prog-if
00 [VGA])
	Subsystem: Cirrus Logic CL-GD5480
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 64 (500ns min, 2500ns max)
	Region 0: Memory at f6000000 (32-bit, prefetchable) [size=32M]
	Region 1: Memory at f4104000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=32K]

01:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21150 (rev 06)
(prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B+
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 240, cache line size 08
	Bus: primary=01, secondary=02, subordinate=02, sec-latency=68
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f4200000-f42fffff
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

02:07.0 SCSI storage controller: Q Logic QLA2200 (rev 05)
	Subsystem: Q Logic: Unknown device 0002
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 208 (16000ns min), cache line size 08
	Interrupt: pin A routed to IRQ 23
	Region 0: I/O ports at 3000 [size=256]
	Region 1: Memory at f4200000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [44] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Comment 1 Brent Fox 2001-04-16 21:59:27 UTC 
Do you have any drives in the machine at all?
Comment 2 mkp 2001-04-16 22:17:42 UTC 
2 x 30GB WDC WD307AA on the internal IDE controller,
5 x 9GB IBM DMVS on the SYM53C896 SCSI controller,
8 x 18GB IBM DDYF on the Qlogic 2200 Fibre Channel controller.
Comment 3 Brent Fox 2001-04-19 16:45:47 UTC 

*** This bug has been marked as a duplicate of 36601 ***
Comment 4 Brent Fox 2001-04-19 17:54:32 UTC 
I think this is a kernel problem...we've had a couple of reports like this.  I
reassigned bug #36601 to the kernel.