Bug 4676

Summary: sndconfig locks up
Product: [Retired] Red Hat Linux Reporter: mhelles
Component: isapnptoolsAssignee: Bill Nottingham <notting>
Status: CLOSED NOTABUG QA Contact:
Severity: medium Docs Contact:
Priority: medium    
Version: 6.0CC: rvokal
Target Milestone: ---   
Target Release: ---   
Hardware: i386   
OS: Linux   
Whiteboard:
Fixed In Version: Doc Type: Bug Fix
Doc Text:
Story Points: ---
Clone Of: Environment:
Last Closed: 1999-10-27 23:00:39 UTC Type: ---
Regression: --- Mount Type: ---
Documentation: --- CRM:
Verified Versions: Category: ---
oVirt Team: --- RHEL 7.3 requirements from Atomic Host:
Cloudforms Team: --- Target Upstream Version:
Embargoed:

Description mhelles 1999-08-23 19:19:37 UTC 
When running sndconfig (ver. 0.33), the prog. correctly
finds my "OPTi Audio 16" sound card (SB comp.), but when I
press the "OK" button, the system locks up, i.e. the
keyboard and mouse are both ignored. All I can do is press
the hardware reset button.

Looking through the various look-a-like error reports, I
figure that you would like to have the output of the
pnpdump program. Here it comes:

# $Id: pnpdump.c,v 1.18 1999/02/14 22:47:18 fox Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -
DABORT_ONRESERR
#
# Trying port address 0203
# Board 1 has serial identifier 81 ff ff ff ff 25 09 14 3e

# (DEBUG)
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or
WARNING

# Card 1: (serial identifier 81 ff ff ff ff 25 09 14 3e)
# Vendor Id OPT0925, No Serial Number (-1), checksum 0x81.
# Version 1.0, Vendor version 0.0
# ANSI string -->OPTi Audio 16<--
#
# Logical device id PNP0600
#
# Edit the entries below to uncomment out the configuration
required.
# Note that only the first value of any range is given,
this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE OPT0925/-1 (LD 0
#     ANSI string -->IDE CD<--

# Multiple choice time, choose one only !

#     Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0376
#             Maximum IO base address 0x0376
#             IO base alignment 8 bytes
#             Number of IO addresses required: 2
# (IO 0 (SIZE 2) (BASE 0x0376))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0170
#             Maximum IO base address 0x0170
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (SIZE 8) (BASE 0x0170))
#       IRQ 15.
#             High true, edge sensitive interrupt (by
default)
# (INT 0 (IRQ 15 (MODE +E)))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x036e
#             Maximum IO base address 0x036e
#             IO base alignment 8 bytes
#             Number of IO addresses required: 2
# (IO 0 (SIZE 2) (BASE 0x036e))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0168
#             Maximum IO base address 0x0168
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (SIZE 8) (BASE 0x0168))
#       IRQ 10.
#             High true, edge sensitive interrupt (by
default)
# (INT 0 (IRQ 10 (MODE +E)))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x03ee
#             Maximum IO base address 0x03ee
#             IO base alignment 8 bytes
#             Number of IO addresses required: 2
# (IO 0 (SIZE 2) (BASE 0x03ee))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x01e8
#             Maximum IO base address 0x01e8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (SIZE 8) (BASE 0x01e8))
#       IRQ 11.
#             High true, edge sensitive interrupt (by
default)
# (INT 0 (IRQ 11 (MODE +E)))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x036e
#             Maximum IO base address 0x03fe
#             IO base alignment 8 bytes
#             Number of IO addresses required: 2
# (IO 0 (SIZE 2) (BASE 0x036e))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0168
#             Maximum IO base address 0x01f8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (SIZE 8) (BASE 0x0168))
#       IRQ 5, 7, 9, 10, 11 or 15.
#             High true, edge sensitive interrupt (by
default)
# (INT 0 (IRQ 5 (MODE +E)))

#     End dependent functions
 (NAME "OPT0925/-1[0]{IDE CD              }")
# (ACT Y)
))
#
# Logical device id OPT9250
#
# Edit the entries below to uncomment out the configuration
required.
# Note that only the first value of any range is given,
this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE OPT0925/-1 (LD 1
#     ANSI string -->OPTi Audio 16<--

# Multiple choice time, choose one only !

#     Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0240
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0530
#             Maximum IO base address 0x0604
#             IO base alignment 212 bytes
#             Number of IO addresses required: 8
# (IO 1 (SIZE 8) (BASE 0x0530))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0380
#             Maximum IO base address 0x03f0
#             IO base alignment 16 bytes
#             Number of IO addresses required: 12
# (IO 2 (SIZE 12) (BASE 0x0380))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0f8d
#             Maximum IO base address 0x0f8d
#             IO base alignment 1 bytes
#             Number of IO addresses required: 16
# (IO 3 (SIZE 16) (BASE 0x0f8d))
#       IRQ 5, 7 or 10.
#             High true, edge sensitive interrupt (by
default)
# (INT 0 (IRQ 5 (MODE +E)))
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 1 (CHANNEL 0))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0240
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0530
#             Maximum IO base address 0x0604
#             IO base alignment 212 bytes
#             Number of IO addresses required: 8
# (IO 1 (SIZE 8) (BASE 0x0530))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0380
#             Maximum IO base address 0x03f0
#             IO base alignment 16 bytes
#             Number of IO addresses required: 12
# (IO 2 (SIZE 12) (BASE 0x0380))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0f0d
#             Maximum IO base address 0x0f0d
#             IO base alignment 1 bytes
#             Number of IO addresses required: 16
# (IO 3 (SIZE 16) (BASE 0x0f0d))
#       IRQ 5, 7 or 10.
#             High true, edge sensitive interrupt (by
default)
# (INT 0 (IRQ 5 (MODE +E)))
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 1 (CHANNEL 0))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0240
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0530
#             Maximum IO base address 0x0ff0
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (SIZE 8) (BASE 0x0530))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0380
#             Maximum IO base address 0x03f0
#             IO base alignment 16 bytes
#             Number of IO addresses required: 12
# (IO 2 (SIZE 12) (BASE 0x0380))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0f8d
#             Maximum IO base address 0x0f8d
#             IO base alignment 1 bytes
#             Number of IO addresses required: 16
# (IO 3 (SIZE 16) (BASE 0x0f8d))
#       IRQ 5, 7 or 10.
#             High true, edge sensitive interrupt (by
default)
# (INT 0 (IRQ 5 (MODE +E)))
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 0 (CHANNEL 0))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0240
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0530
#             Maximum IO base address 0x0ff0
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (SIZE 8) (BASE 0x0530))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0380
#             Maximum IO base address 0x03f0
#             IO base alignment 16 bytes
#             Number of IO addresses required: 12
# (IO 2 (SIZE 12) (BASE 0x0380))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0f0d
#             Maximum IO base address 0x0f0d
#             IO base alignment 1 bytes
#             Number of IO addresses required: 16
# (IO 3 (SIZE 16) (BASE 0x0f0d))
#       IRQ 5, 7 or 10.
#             High true, edge sensitive interrupt (by
default)
# (INT 0 (IRQ 5 (MODE +E)))
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 0 (CHANNEL 0))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0240
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0530
#             Maximum IO base address 0x0ff0
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (SIZE 8) (BASE 0x0530))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0380
#             Maximum IO base address 0x03f0
#             IO base alignment 16 bytes
#             Number of IO addresses required: 12
# (IO 2 (SIZE 12) (BASE 0x0380))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0f0d
#             Maximum IO base address 0x0fed
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 3 (SIZE 16) (BASE 0x0f0d))
#       IRQ 5, 7, 9, 10 or 11.
#             High true, edge sensitive interrupt (by
default)
# (INT 0 (IRQ 5 (MODE +E)))
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 1 (CHANNEL 0))

#     End dependent functions
 (NAME "OPT0925/-1[1]{OPTi Audio 16       }")
# (ACT Y)
))
#
# Logical device id PNPb02f
#
# Edit the entries below to uncomment out the configuration
required.
# Note that only the first value of any range is given,
this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE OPT0925/-1 (LD 2
#     ANSI string -->Game Port<--
#     Logical device decodes 16 bit IO address lines
#         Minimum IO base address 0x0200
#         Maximum IO base address 0x0207
#         IO base alignment 1 bytes
#         Number of IO addresses required: 1
# (IO 0 (SIZE 1) (BASE 0x0200))
 (NAME "OPT0925/-1[2]{Game Port           }")
# (ACT Y)
))
#
# Logical device id OPT0002
#
# Edit the entries below to uncomment out the configuration
required.
# Note that only the first value of any range is given,
this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE OPT0925/-1 (LD 3
#     ANSI string -->MPU401<--
#     Logical device decodes 16 bit IO address lines
#         Minimum IO base address 0x0300
#         Maximum IO base address 0x0330
#         IO base alignment 16 bytes
#         Number of IO addresses required: 2
# (IO 0 (SIZE 2) (BASE 0x0300))
#     IRQ 5, 7, 9 or 10.
#         High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
 (NAME "OPT0925/-1[3]{MPU401              }")
# (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
Comment 1 Bill Nottingham 1999-08-23 22:27:59 UTC 
Which 'OK' button - the 'OK' in the 'card information' dialog,
or when playing a sample sound?

Also, are you running it under X Windows or on the console,
and do you have a CD-ROM attached to the sound card's CD interface?
Comment 2 Bill Nottingham 1999-08-24 14:42:59 UTC 
Hmm... I was thinking that it might lock up because it's trying to
do PnP on a CD-ROM that's in use by the system, but that's probably
not it.

Does sndconfig create an isapnp.conf file, or does it lock up before
it writes it?
Comment 3 Bill Nottingham 1999-08-27 23:13:59 UTC 
If you run 'pnpdump -c' from the command line, does
this cause any problems?
Comment 4 Bill Nottingham 1999-08-31 15:41:59 UTC 
OK, what's the contents of
a) /proc/pci
b) /proc/ioports
c) /proc/interrupts
d) /proc/dma

... some hardware you have is interfering with the PnP probe.
Comment 5 Bill Nottingham 1999-09-23 19:24:59 UTC 
What happens if you upgrade to isapnptools-1.18b-2 &
sndconfig-0.34-7 from Raw Hide?
Comment 6 Bill Nottingham 1999-10-27 23:00:59 UTC 
closed, lack of input. Re-open if the new sndconfig&isapnptools
doesn't work for you.