Bug 478309

Summary: powermanger problem with eeepc 701 ( reduce the battery work of 2 hours )
Product: [Fedora] Fedora Reporter: Giancarlo <giancarlogiesa>
Component: kernelAssignee: Kernel Maintainer List <kernel-maint>
Status: CLOSED WONTFIX QA Contact: Fedora Extras Quality Assurance <extras-qa>
Severity: high Docs Contact:
Priority: low    
Version: 11CC: clodoaldo.pinto.neto, jarod, kernel-maint
Target Milestone: ---   
Target Release: ---   
Hardware: i686   
OS: Linux   
Whiteboard:
Fixed In Version: Doc Type: Bug Fix
Doc Text:
Story Points: ---
Clone Of: Environment:
Last Closed: 2010-06-28 11:02:15 UTC Type: ---
Regression: --- Mount Type: ---
Documentation: --- CRM:
Verified Versions: Category: ---
oVirt Team: --- RHEL 7.3 requirements from Atomic Host:
Cloudforms Team: --- Target Upstream Version:
Embargoed:
Bug Depends On:    
Bug Blocks: 462851    
Attachments:
Description Flags
dmesg output in fedora 11 none

Description Giancarlo 2008-12-27 20:03:52 UTC 
Description of problem:
Fedora 10 can' t reduce the cpu speed on the eeepc 701 ( it work on other linux
distribution, i tested ubuntu and mandriva )
this cause a very fast reduce of the battery ( 1:30 to 2 hours )

How reproducible:

Steps to Reproduce:
1. right click on one of the two gnome panel
2. add applet
3. add the cpu monitor for change-frequence

Actual results:
the applet return error because fedora 10 ( i think also 9, etc.. ) can' t
change the cpu-frequence ( i think that is an powermanger problem )

Expected results:
well, will be nice if fedora fix it just on the fedora 10, so the eeepc can
work 2 hours more... ( the double )

Additional info:
there are a lot of this eeepc 701...
ah, there si nothing about this on the ufficial wiki page: http://fedoraproject.org/wiki/EeePc
Comment 1 Jarod Wilson 2008-12-30 19:56:15 UTC 
This would be a bug in the cpufreq driver in the kernel, not the userspace. Reassigning.
Comment 2 Giancarlo 2008-12-30 22:43:02 UTC 
ok, if you need some system log tell me..
Comment 3 Jarod Wilson 2008-12-30 22:55:35 UTC 
the output of dmesg after booting w/the added kernel param "cpufreq.debug=7" would probably be useful to start out, unless this is something already known and fixed upstream somewhere...
Comment 4 Giancarlo 2009-01-06 12:12:04 UTC 
i add the kernel param, but this don' t reduce the cpu freq when it is not used and will work all time at full speed ( 630Mhz )

where i can get the output of dmesg ?
Comment 5 Jarod Wilson 2009-01-06 15:28:53 UTC 
The param isn't designed to change any functionality, just add extra debugging output to the kernel log. You can get a dmesg dump by simply typing "dmesg" at a command prompt after booting up. "dmesg > dmesg.txt" to output it to a text file you can attach here.
Comment 6 Giancarlo 2009-01-06 20:02:59 UTC 
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.9-159.fc10.i686 (mockbuild.phx.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Tue Dec 16 15:12:04 EST 2008
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f780000 (usable)
 BIOS-e820: 000000001f780000 - 000000001f790000 (ACPI data)
 BIOS-e820: 000000001f790000 - 000000001f7d0000 (ACPI NVS)
 BIOS-e820: 000000001f7d0000 - 000000001f7de000 (reserved)
 BIOS-e820: 000000001f7e0000 - 000000001f800000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x1f780 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1f780000 @ 10000-16000
Using x86 segment limits to approximate NX protection
RAMDISK: 1f39f000 - 1f76fb9f
ACPI: RSDP 000FBE60, 0014 (r0 ACPIAM)
ACPI: RSDT 1F780000, 0034 (r1 A M I  OEMRSDT   1000808 MSFT       97)
ACPI: FACP 1F780200, 0081 (r1 A M I  OEMFACP   1000808 MSFT       97)
ACPI: DSDT 1F780400, 5F2B (r1  A0797 A0797000        0 INTL 20051117)
ACPI: FACS 1F790000, 0040
ACPI: APIC 1F780390, 0068 (r1 A M I  OEMAPIC   1000808 MSFT       97)
ACPI: OEMB 1F790040, 0046 (r1 A M I  AMI_OEM   1000808 MSFT       97)
ACPI: MCFG 1F786330, 003C (r1 A M I  OEMMCFG   1000808 MSFT       97)
0MB HIGHMEM available.
503MB LOWMEM available.
  mapped low ram: 0 - 1f780000
  low ram: 00000000 - 1f780000
  bootmap 00012000 - 00015ef0
(9 early reservations) ==> bootmem [0000000000 - 001f780000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 000097212c]    TEXT DATA BSS ==> [0000400000 - 000097212c]
  #4 [001f39f000 - 001f76fb9f]          RAMDISK ==> [001f39f000 - 001f76fb9f]
  #5 [0000973000 - 0000977000]    INIT_PG_TABLE ==> [0000973000 - 0000977000]
  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #7 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  #8 [0000012000 - 0000016000]          BOOTMAP ==> [0000012000 - 0000016000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0001f780
  HighMem  0x0001f780 -> 0x0001f780
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0001f780
On node 0 totalpages: 128783
free_area_init_node: node 0, pgdat c07f3a80, node_mem_map c1000200
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 123825 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000)
PERCPU: Allocating 41372 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127776
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet cpufreq.debug=7
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c089f000 soft=c087f000
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 630.063 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 500800k/515584k available (2738k kernel code, 14084k reserved, 1418k data, 412k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xe0000000 - 0xff3fe000   ( 499 MB)
    lowmem  : 0xc0000000 - 0xdf780000   ( 503 MB)
      .init : 0xc0815000 - 0xc087c000   ( 412 kB)
      .data : 0xc06acb96 - 0xc080f618   (1418 kB)
      .text : 0xc0400000 - 0xc06acb96   (2738 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 1260.12 BogoMIPS (lpj=630063)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) M processor          900MHz stepping 08
Brought up 1 CPUs
Total of 1 processors activated (1260.12 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3268 bytes
CPU0 attaching NULL sched-domain.
net_namespace: 840 bytes
Booting paravirtualized kernel on bare hardware
Time: 19:58:11  Date: 01/06/09
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:02.0 reg 10 32bit mmio: [f7f00000, f7f7ffff]
PCI: 0000:00:02.0 reg 14 io port: [ec00, ec07]
PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
PCI: 0000:00:02.0 reg 1c 32bit mmio: [f7ec0000, f7efffff]
PCI: 0000:00:02.1 reg 10 32bit mmio: [f7f80000, f7ffffff]
PCI: 0000:00:1b.0 reg 10 64bit mmio: [f7eb8000, f7ebbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [e400, e41f]
PCI: 0000:00:1d.1 reg 20 io port: [e480, e49f]
PCI: 0000:00:1d.2 reg 20 io port: [e800, e81f]
PCI: 0000:00:1d.3 reg 20 io port: [e880, e89f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [f7eb7c00, f7eb7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: 0000:00:1f.2 reg 10 io port: [0, 7]
PCI: 0000:00:1f.2 reg 14 io port: [0, 3]
PCI: 0000:00:1f.2 reg 18 io port: [0, 7]
PCI: 0000:00:1f.2 reg 1c io port: [0, 3]
PCI: 0000:00:1f.2 reg 20 io port: [ffa0, ffaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
PCI: 0000:03:00.0 reg 10 64bit mmio: [fbfc0000, fbffffff]
PCI: 0000:03:00.0 reg 30 32bit mmio: [fbfa0000, fbfbffff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.1. It can be enabled forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:1c.1 32bit mmio: [fbf00000, fbffffff]
PCI: 0000:01:00.0 reg 10 64bit mmio: [fbef0000, fbefffff]
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.2. It can be enabled forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:1c.2 32bit mmio: [f8000000, fbefffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [f0000000, f6ffffff]
pci 0000:00:1e.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
tracer: 772 pages allocated for 65536 entries of 48 bytes
   actual entries 65620
ACPI: RTC can wake from S4
system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
system 00:08: ioport range 0x380-0x383 has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x480-0x4bf has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x1f7fffff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xfbf00000-0xfbffffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.2:   IO window: disabled
pci 0000:00:1c.2:   MEM window: 0xf8000000-0xfbefffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000f0000000-0x000000f6ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 04 index 0 mmio: [0, 0]
bus: 04 index 1 mmio: [0, 0]
bus: 04 index 2 mmio: [0, 0]
bus: 04 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [fbf00000, fbffffff]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [f8000000, fbefffff]
bus: 01 index 2 mmio: [f0000000, f6ffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 05 index 0 mmio: [0, 0]
bus: 05 index 1 mmio: [0, 0]
bus: 05 index 2 mmio: [0, 0]
bus: 05 index 3 io port: [0, ffff]
bus: 05 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 3906k freed
speedstep-lib: x86: 6, model: d
speedstep-ich: Intel(R) SpeedStep(TM) capable processor not found
speedstep-lib: x86: 6, model: d
speedstep-smi: No supported Intel CPU detected.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1231271891.101:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 986
SELinux:  Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI: AC Adapter [AC0] (on-line)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (41 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 915GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input4
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: PCI INT B disabled
ahci: probe of 0000:00:1f.2 failed with error -22
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata2.00: ATA-4: SILICONMOTION SM223AC, , max UDMA/66
ata2.00: 7815024 sectors, multi 0: LBA 
ata2.00: configured for UDMA/66
scsi 1:0:0:0: Direct-Access     ATA      SILICONMOTION SM n/a  PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors (4001 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors (4001 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.9-159.fc10.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.9-159.fc10.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.9-159.fc10.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-5: configuration #1 chosen from 1 choice
usb 1-5: New USB device found, idVendor=0951, idProduct=1606
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 1-5: Product: UB6225
usb 1-5: Manufacturer: ENE
usb 1-5: SerialNumber: 146030377350
usb 1-8: new high speed USB device using ehci_hcd and address 3
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.9-159.fc10.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-8: configuration #1 chosen from 1 choice
usb 1-8: New USB device found, idVendor=eb1a, idProduct=2761
usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27.9-159.fc10.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
  Magic number: 9:875:1000
block sda2: hash matches
 pnp1: hash matches
pnp 00:02: hash matches
Freeing unused kernel memory: 412k freed
Write protecting the kernel text: 2740k
Write protecting the kernel read-only data: 1172k
Marking TSC unstable due to TSC halts in idle
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
padlock: VIA PadLock not detected.
padlock: VIA PadLock Hash Engine not detected.
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1231271901.345:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 112374 rules.
SELinux: 8192 avtab hash slots, 112374 rules.
SELinux:  8 users, 11 roles, 2642 types, 119 bools, 1 sens, 1024 cats
SELinux:  73 classes, 112374 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1231271902.249:3): policy loaded auid=4294967295 ses=4294967295
udevd version 127 started
eeepc: Eee PC Hotkey Driver
eeepc: Hotkey init flags 0x41
eeepc: Get control methods supported: 0x101711
input: Asus EeePC extra buttons as /devices/virtual/input/input7
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:16/input/input8
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
Atheros(R) L2 Ethernet Driver - version 2.0.4
Copyright (c) 2007 Atheros Corporation.
atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
atl2 0000:03:00.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
ath5k_pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath5k_pci 0000:01:00.0: setting latency timer to 64
ath5k_pci 0000:01:00.0: registered as 'phy0'
ath5k phy0: Support for RF2425 is under development.
phy0: Selected rate control algorithm 'pid'
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
Linux video capture interface: v2.00
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
input: UVC Camera (eb1a:2761) as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: Device needs an ACPI driver
input: PC Speaker as /devices/platform/pcspkr/input/input10
device-mapper: multipath: version 1.0.5 loaded
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access     USB2.0   CardReader SD0   0100 PQ: 0 ANSI: 0
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
EXT3 FS on dm-1, internal journal
Clocksource tsc unstable (delta = -104923930 ns)
SELinux: initialized (dev sda1, type ext2), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran.co.uk>
firmware: requesting intel-ucode/06-0d-08
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR.  Disabling tiling.
[drm] Initialized i915 1.6.0 20080730 on minor 0
fuse init (API version 7.9)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
sealert[2559] general protection ip:1b91eb sp:bfd50610 error:0 in ld-2.9.so[1a9000+20000]
Comment 7 Jarod Wilson 2009-01-06 20:22:47 UTC 
I don't see any evidence of acpi-cpufreq ever trying to load, which I believe is the cpufreq driver for these. Do you have the cpuspeed package installed and configured to run on system startup?

# rpm -q cpuspeed
# service cpuspeed status
Comment 8 Giancarlo 2009-01-07 18:57:31 UTC 
ok, i have installed now cpuspeed

from the "rpm -q cpuspeed" command return:
cpuspeed-1.5-2.fc10.i386
from the "" command return:
cpuspeed is stopped

the dmseg report is:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.9-159.fc10.i686 (mockbuild.phx.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Tue Dec 16 15:12:04 EST 2008
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f780000 (usable)
 BIOS-e820: 000000001f780000 - 000000001f790000 (ACPI data)
 BIOS-e820: 000000001f790000 - 000000001f7d0000 (ACPI NVS)
 BIOS-e820: 000000001f7d0000 - 000000001f7de000 (reserved)
 BIOS-e820: 000000001f7e0000 - 000000001f800000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x1f780 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1f780000 @ 10000-16000
Using x86 segment limits to approximate NX protection
RAMDISK: 1f39f000 - 1f76fb9f
ACPI: RSDP 000FBE60, 0014 (r0 ACPIAM)
ACPI: RSDT 1F780000, 0034 (r1 A M I  OEMRSDT   1000808 MSFT       97)
ACPI: FACP 1F780200, 0081 (r1 A M I  OEMFACP   1000808 MSFT       97)
ACPI: DSDT 1F780400, 5F2B (r1  A0797 A0797000        0 INTL 20051117)
ACPI: FACS 1F790000, 0040
ACPI: APIC 1F780390, 0068 (r1 A M I  OEMAPIC   1000808 MSFT       97)
ACPI: OEMB 1F790040, 0046 (r1 A M I  AMI_OEM   1000808 MSFT       97)
ACPI: MCFG 1F786330, 003C (r1 A M I  OEMMCFG   1000808 MSFT       97)
0MB HIGHMEM available.
503MB LOWMEM available.
  mapped low ram: 0 - 1f780000
  low ram: 00000000 - 1f780000
  bootmap 00012000 - 00015ef0
(9 early reservations) ==> bootmem [0000000000 - 001f780000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 000097212c]    TEXT DATA BSS ==> [0000400000 - 000097212c]
  #4 [001f39f000 - 001f76fb9f]          RAMDISK ==> [001f39f000 - 001f76fb9f]
  #5 [0000973000 - 0000977000]    INIT_PG_TABLE ==> [0000973000 - 0000977000]
  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #7 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  #8 [0000012000 - 0000016000]          BOOTMAP ==> [0000012000 - 0000016000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0001f780
  HighMem  0x0001f780 -> 0x0001f780
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0001f780
On node 0 totalpages: 128783
free_area_init_node: node 0, pgdat c07f3a80, node_mem_map c1000200
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 123825 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000)
PERCPU: Allocating 41372 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127776
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet cpuspeed.debug=7
Unknown boot option `cpuspeed.debug=7': ignoring
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c089f000 soft=c087f000
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 630.063 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 500800k/515584k available (2738k kernel code, 14084k reserved, 1418k data, 412k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xe0000000 - 0xff3fe000   ( 499 MB)
    lowmem  : 0xc0000000 - 0xdf780000   ( 503 MB)
      .init : 0xc0815000 - 0xc087c000   ( 412 kB)
      .data : 0xc06acb96 - 0xc080f618   (1418 kB)
      .text : 0xc0400000 - 0xc06acb96   (2738 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 1260.12 BogoMIPS (lpj=630063)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) M processor          900MHz stepping 08
Brought up 1 CPUs
Total of 1 processors activated (1260.12 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3268 bytes
CPU0 attaching NULL sched-domain.
net_namespace: 840 bytes
Booting paravirtualized kernel on bare hardware
Time: 18:52:43  Date: 01/07/09
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:02.0 reg 10 32bit mmio: [f7f00000, f7f7ffff]
PCI: 0000:00:02.0 reg 14 io port: [ec00, ec07]
PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
PCI: 0000:00:02.0 reg 1c 32bit mmio: [f7ec0000, f7efffff]
PCI: 0000:00:02.1 reg 10 32bit mmio: [f7f80000, f7ffffff]
PCI: 0000:00:1b.0 reg 10 64bit mmio: [f7eb8000, f7ebbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [e400, e41f]
PCI: 0000:00:1d.1 reg 20 io port: [e480, e49f]
PCI: 0000:00:1d.2 reg 20 io port: [e800, e81f]
PCI: 0000:00:1d.3 reg 20 io port: [e880, e89f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [f7eb7c00, f7eb7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: 0000:00:1f.2 reg 10 io port: [0, 7]
PCI: 0000:00:1f.2 reg 14 io port: [0, 3]
PCI: 0000:00:1f.2 reg 18 io port: [0, 7]
PCI: 0000:00:1f.2 reg 1c io port: [0, 3]
PCI: 0000:00:1f.2 reg 20 io port: [ffa0, ffaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
PCI: 0000:03:00.0 reg 10 64bit mmio: [fbfc0000, fbffffff]
PCI: 0000:03:00.0 reg 30 32bit mmio: [fbfa0000, fbfbffff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.1. It can be enabled forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:1c.1 32bit mmio: [fbf00000, fbffffff]
PCI: 0000:01:00.0 reg 10 64bit mmio: [fbef0000, fbefffff]
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.2. It can be enabled forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:1c.2 32bit mmio: [f8000000, fbefffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [f0000000, f6ffffff]
pci 0000:00:1e.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
tracer: 772 pages allocated for 65536 entries of 48 bytes
   actual entries 65620
ACPI: RTC can wake from S4
system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
system 00:08: ioport range 0x380-0x383 has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x480-0x4bf has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x1f7fffff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xfbf00000-0xfbffffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.2:   IO window: disabled
pci 0000:00:1c.2:   MEM window: 0xf8000000-0xfbefffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000f0000000-0x000000f6ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 04 index 0 mmio: [0, 0]
bus: 04 index 1 mmio: [0, 0]
bus: 04 index 2 mmio: [0, 0]
bus: 04 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [fbf00000, fbffffff]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [f8000000, fbefffff]
bus: 01 index 2 mmio: [f0000000, f6ffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 05 index 0 mmio: [0, 0]
bus: 05 index 1 mmio: [0, 0]
bus: 05 index 2 mmio: [0, 0]
bus: 05 index 3 io port: [0, ffff]
bus: 05 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 3906k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1231354363.100:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 986
SELinux:  Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI: AC Adapter [AC0] (on-line)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (52 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 915GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input4
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: PCI INT B disabled
ahci: probe of 0000:00:1f.2 failed with error -22
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata2.00: ATA-4: SILICONMOTION SM223AC, , max UDMA/66
ata2.00: 7815024 sectors, multi 0: LBA 
ata2.00: configured for UDMA/66
scsi 1:0:0:0: Direct-Access     ATA      SILICONMOTION SM n/a  PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors (4001 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors (4001 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.9-159.fc10.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.9-159.fc10.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.9-159.fc10.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-5: configuration #1 chosen from 1 choice
usb 1-5: New USB device found, idVendor=0951, idProduct=1606
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 1-5: Product: UB6225
usb 1-5: Manufacturer: ENE
usb 1-5: SerialNumber: 146030377350
usb 1-8: new high speed USB device using ehci_hcd and address 3
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.9-159.fc10.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-8: configuration #1 chosen from 1 choice
usb 1-8: New USB device found, idVendor=eb1a, idProduct=2761
usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27.9-159.fc10.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
  Magic number: 9:741:897
platform vesafb.0: hash matches
Freeing unused kernel memory: 412k freed
Write protecting the kernel text: 2740k
Write protecting the kernel read-only data: 1172k
Marking TSC unstable due to TSC halts in idle
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
padlock: VIA PadLock not detected.
padlock: VIA PadLock Hash Engine not detected.
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1231354397.909:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 112374 rules.
SELinux: 8192 avtab hash slots, 112374 rules.
SELinux:  8 users, 11 roles, 2642 types, 119 bools, 1 sens, 1024 cats
SELinux:  73 classes, 112374 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1231354398.812:3): policy loaded auid=4294967295 ses=4294967295
udevd version 127 started
eeepc: Eee PC Hotkey Driver
eeepc: Hotkey init flags 0x41
eeepc: Get control methods supported: 0x101711
input: Asus EeePC extra buttons as /devices/virtual/input/input7
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:16/input/input8
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
Atheros(R) L2 Ethernet Driver - version 2.0.4
Copyright (c) 2007 Atheros Corporation.
atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
atl2 0000:03:00.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
ath5k_pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath5k_pci 0000:01:00.0: setting latency timer to 64
ath5k_pci 0000:01:00.0: registered as 'phy0'
ath5k phy0: Support for RF2425 is under development.
phy0: Selected rate control algorithm 'pid'
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Linux video capture interface: v2.00
intel_rng: FWH not detected
uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
input: UVC Camera (eb1a:2761) as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: Device needs an ACPI driver
input: PC Speaker as /devices/platform/pcspkr/input/input10
device-mapper: multipath: version 1.0.5 loaded
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access     USB2.0   CardReader SD0   0100 PQ: 0 ANSI: 0
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
EXT3 FS on dm-1, internal journal
Clocksource tsc unstable (delta = -100072121 ns)
SELinux: initialized (dev sda1, type ext2), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran.co.uk>
firmware: requesting intel-ucode/06-0d-08
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR.  Disabling tiling.
[drm] Initialized i915 1.6.0 20080730 on minor 0
fuse init (API version 7.9)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
wlan0: authenticate with AP 00:14:7c:45:ea:a7
wlan0: authenticated
wlan0: associate with AP 00:14:7c:45:ea:a7
wlan0: RX AssocResp from 00:14:7c:45:ea:a7 (capab=0x431 status=0 aid=5)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
usb 1-2: new high speed USB device using ehci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb 1-2: New USB device found, idVendor=0781, idProduct=5151
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: Cruzer Micro
usb 1-2: Manufacturer: SanDisk
usb 1-2: SerialNumber: 43215116A882A0B7
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 3:0:0:0: Direct-Access     SanDisk  Cruzer           7.01 PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: [sdc] 15794175 512-byte hardware sectors (8087 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 45 00 00 08
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sd 3:0:0:0: [sdc] 15794175 512-byte hardware sectors (8087 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 45 00 00 08
sd 3:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI removable disk
sd 3:0:0:0: Attached scsi generic sg2 type 0
SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts
Comment 9 Giancarlo 2009-01-08 18:26:18 UTC 
i see now that exist the same problem on ubuntu 8.10 LIVE,
but i remember that ubuntu 8.04.1 works fine and also mandriva 2008.1 ( i don' t remember if i tested the 2009 version )

is this a kernel bug?
Comment 10 Giancarlo 2009-01-11 20:32:31 UTC 
if can help you i fixed the problem on ubuntu 8.10 with adam's kernel by adding the follow lines at the /etc/modules file:
pciehp pciehp_debug=1 pciehp_force=1
p4_clockmod
lp

found at: http://forum.eeepc.it/viewtopic.php?id=4697&p=1

p.s.: i also found a bug report on other distribution ubuntu-based: https://bugs.launchpad.net/ubuntu-eee/+bug/313747
Comment 11 Clodoaldo Pinto Neto 2009-06-25 20:19:16 UTC 
I confirm the bug in Fedora 11.

$ rpm -q cpuspeed
cpuspeed-1.5-8.fc11.i586
$ service cpuspeed status
cpuspeed is stopped
# uname -a
Linux anao 2.6.29.4-167.fc11.i586 #1 SMP Wed May 27 17:14:37 EDT 2009 i686 i686 i386 GNU/Linux
Comment 12 Clodoaldo Pinto Neto 2009-06-25 20:20:22 UTC 
Created attachment 349463 [details]
dmesg output in fedora 11
Comment 13 Peter Robinson 2009-08-13 20:17:31 UTC 
Clodoaldo, does the cpuspeed service run on startup? You can check it by running the following command and you can see the output you should get below. 

[root@neo ~]# chkconfig --list | grep cpu
cpuspeed       	0:off	1:on	2:on	3:on	4:on	5:on	6:off
[root@neo ~]# 

If its off for run levels 3-5 you can ensure it starts on startup with the 'chkconfig cpuspeed on'
Comment 14 Clodoaldo Pinto Neto 2009-08-14 10:37:58 UTC 
Yes it runs on startup:

$ chkconfig --list | grep cpu
cpuspeed       	0:off	1:on	2:on	3:on	4:on	5:on	6:off
Comment 15 Bug Zapper 2010-04-27 12:38:52 UTC 
This message is a reminder that Fedora 11 is nearing its end of life.
Approximately 30 (thirty) days from now Fedora will stop maintaining
and issuing updates for Fedora 11.  It is Fedora's policy to close all
bug reports from releases that are no longer maintained.  At that time
this bug will be closed as WONTFIX if it remains open with a Fedora 
'version' of '11'.

Package Maintainer: If you wish for this bug to remain open because you
plan to fix it in a currently maintained version, simply change the 'version' 
to a later Fedora version prior to Fedora 11's end of life.

Bug Reporter: Thank you for reporting this issue and we are sorry that 
we may not be able to fix it before Fedora 11 is end of life.  If you 
would still like to see this bug fixed and are able to reproduce it 
against a later version of Fedora please change the 'version' of this 
bug to the applicable version.  If you are unable to change the version, 
please add a comment here and someone will do it for you.

Although we aim to fix as many bugs as possible during every release's 
lifetime, sometimes those efforts are overtaken by events.  Often a 
more recent Fedora release includes newer upstream software that fixes 
bugs or makes them obsolete.

The process we are following is described here: 
http://fedoraproject.org/wiki/BugZappers/HouseKeeping
Comment 16 Bug Zapper 2010-06-28 11:02:15 UTC 
Fedora 11 changed to end-of-life (EOL) status on 2010-06-25. Fedora 11 is 
no longer maintained, which means that it will not receive any further 
security or bug fix updates. As a result we are closing this bug.

If you can reproduce this bug against a currently maintained version of 
Fedora please feel free to reopen this bug against that version.

Thank you for reporting this bug and we are sorry it could not be fixed.