Bug 718280

Summary:	Wifi Hard Blocked / AIrplane Mode Stays One
Product:	[Fedora] Fedora	Reporter:	jimh0713
Component:	kernel	Assignee:	John W. Linville <linville>
Status:	CLOSED INSUFFICIENT_DATA	QA Contact:	Fedora Extras Quality Assurance <extras-qa>
Severity:	medium	Docs Contact:
Priority:	unspecified
Version:	15	CC:	aquini, dcbw, Fedlinux, gansalmon, itamar, jonathan, kernel-maint, linville, madhu.chinakonda, neumann
Target Milestone:	---
Target Release:	---
Hardware:	i686
OS:	Linux
Whiteboard:
Fixed In Version:		Doc Type:	Bug Fix
Doc Text:		Story Points:	---
Clone Of:		Environment:
Last Closed:	2011-08-24 15:38:29 UTC	Type:	---
Regression:	---	Mount Type:	---
Documentation:	---	CRM:
Verified Versions:		Category:	---
oVirt Team:	---	RHEL 7.3 requirements from Atomic Host:
Cloudforms Team:	---	Target Upstream Version:

Description jimh0713 2011-07-01 16:23:22 UTC

Description of problem: 

Upgraded my HP Compaq nc6220 to Fedora 15 and attempted to connect to my wireless network which did not work. Noticed that the wireless device in the Network panel showed that it was in Airplane Mode which I can not turn off and that the wifi was unvailable. Followed the instructions in Bug 713006 which did not work. Here is a some info regarding the wifi that the notebook has. Don't know what else that can be done to correct this issue. Any assistance/quidance would greatly be appreciated.

[root@hp-compaq-nc6220 ~]# rfkill list
0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: yes <=====================
1: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no


[root@hp-compaq-nc6220 ~]# lspci | grep Wireless
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)


[root@hp-compaq-nc6220 ~]# yum install ipw2200-firmware
Loaded plugins: langpacks, presto, refresh-packagekit
Setting up Install Process
Package ipw2200-firmware-3.1-5.fc15.noarch already installed and latest version
Nothing to do

Version-Release number of selected component (if applicable):


How reproducible: All the time


Steps to Reproduce:
1. Turn on notebook
2. Try to connect to a wireless connection
3. Cannot due to a hard block on the device
  
Actual results:

Wireless stays in Airplane mode and cannot connect

Expected results:

To be able to connect to a wireless network.

Additional info:

Comment 1 John W. Linville 2011-07-05 15:27:16 UTC

Please attach the output of running 'dmesg' shortly after boot.

Comment 2 jimh0713 2011-07-05 16:11:58 UTC

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38.8-32.fc15.i686 (mockbuild.fedoraproject.org) (gcc version 4.6.0 20110530 (Red Hat 4.6.0-9) (GCC) ) #1 SMP Mon Jun 13 20:01:50 UTC 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
[    0.000000]  BIOS-e820: 000000003f7d0000 - 000000003f7efc00 (reserved)
[    0.000000]  BIOS-e820: 000000003f7efc00 - 000000003f7fb000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f7fb000 - 000000003f800000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.3 present.
[    0.000000] DMI: Hewlett-Packard HP Compaq nc6220 (PU982AW#ABA)/308A, BIOS 68DTU Ver. F.16 07/24/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3f7d0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 03F800000 mask FFF800000 uncachable
[    0.000000]   2 base 0FEDA0000 mask FFFFE0000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1016MB, range: 8MB, type UC
[    0.000000] reg 2, base: 4175488KB, range: 128KB, type UC
[    0.000000] total RAM covered: 1016M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 2  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1016MB, range: 8MB, type UC
[    0.000000] initial memory mapped : 0 - 01000000
[    0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0036c00000 page 2M
[    0.000000]  0036c00000 - 0036ffe000 page 4k
[    0.000000] kernel direct mapping tables up to 36ffe000 @ ff9000-1000000
[    0.000000] RAMDISK: 37292000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 362a0000 - 36ffdb41
[    0.000000] Move RAMDISK from 0000000037292000 - 0000000037fefb40 to 362a0000 - 36ffdb40
[    0.000000] ACPI: RSDP 000fe270 00014 (v00 HP    )
[    0.000000] ACPI: RSDT 3f7efc84 00034 (v01 HP     0944     24070920 HP   00000001)
[    0.000000] ACPI: FACP 3f7efc00 00084 (v02 HP     0944     00000002 HP   00000001)
[    0.000000] ACPI: DSDT 3f7efd50 08370 (v01 HP       nc6200 00010000 MSFT 0100000E)
[    0.000000] ACPI: FACS 3f7fae80 00040
[    0.000000] ACPI: APIC 3f7efcb8 0005A (v01 HP     0944     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 3f7efd14 0003C (v01 HP     0944     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 3f7f80c0 00371 (v01 HP       HPQPpc 00001001 MSFT 0100000E)
[    0.000000] ACPI: Local APIC address 0xfec01000
[    0.000000] 135MB HIGHMEM available.
[    0.000000] 879MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 36ffe000
[    0.000000]   low ram: 0 - 36ffe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00036ffe
[    0.000000]   HighMem  0x00036ffe -> 0x0003f7d0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003f7d0
[    0.000000] On node 0 totalpages: 259935
[    0.000000] free_area_init_node: node 0, pgdat c0a49fc0, node_mem_map f5aaf200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 219454 pages, LIFO batch:31
[    0.000000]   HighMem zone: 272 pages used for memmap
[    0.000000]   HighMem zone: 34498 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfec01000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:a0800000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f5400000 s27648 r0 d21504 u4194304
[    0.000000] pcpu-alloc: s27648 r0 d21504 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257903
[    0.000000] Kernel command line: ro root=UUID=3a9301c1-b165-4e07-a3e5-c74d263137be rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5200640 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00036ffe:0003f7d0)
[    0.000000] Memory: 1003864k/1040192k available (3953k kernel code, 35876k reserved, 2544k data, 568k init, 139080k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xff575000 - 0xfffff000   (10792 kB)
[    0.000000]     pkmap   : 0xff000000 - 0xff400000   (4096 kB)
[    0.000000]     vmalloc : 0xf77fe000 - 0xfeffe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf6ffe000   ( 879 MB)
[    0.000000]       .init : 0xc0a59000 - 0xc0ae7000   ( 568 kB)
[    0.000000]       .data : 0xc07dc6f6 - 0xc0a587c0   (2544 kB)
[    0.000000]       .text : 0xc0400000 - 0xc07dc6f6   (3953 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:2304
[    0.000000] CPU 0 irqstacks, hard=f5018000 soft=f501a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1729.324 MHz processor.
[    0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.64 BogoMIPS (lpj=1729324)
[    0.002010] pid_max: default: 32768 minimum: 301
[    0.003143] Security Framework initialized
[    0.003156] SELinux:  Initializing.
[    0.003187] SELinux:  Starting in permissive mode
[    0.003345] Mount-cache hash table entries: 512
[    0.004084] Initializing cgroup subsys ns
[    0.004091] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.004094] Initializing cgroup subsys cpuacct
[    0.004163] Initializing cgroup subsys memory
[    0.004196] Initializing cgroup subsys devices
[    0.004200] Initializing cgroup subsys freezer
[    0.004204] Initializing cgroup subsys net_cls
[    0.004207] Initializing cgroup subsys blkio
[    0.004297] mce: CPU supports 5 MCE banks
[    0.004309] CPU0: Thermal monitoring enabled (TM2)
[    0.004514] SMP alternatives: switching to UP code
[    0.007472] Freeing SMP alternatives: 12k freed
[    0.007479] ACPI: Core revision 20110112
[    0.014038] ftrace: allocating 22973 entries in 45 pages
[    0.016074] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.016446] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.026566] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[    0.026998] Performance Events: p6 PMU driver.
[    0.026998] ... version:                0
[    0.026998] ... bit width:              32
[    0.026998] ... generic registers:      2
[    0.026998] ... value mask:             00000000ffffffff
[    0.026998] ... max period:             000000007fffffff
[    0.026998] ... fixed-purpose events:   0
[    0.026998] ... event mask:             0000000000000003
[    0.026998] NMI watchdog enabled, takes one hw-pmu counter.
[    0.026998] Brought up 1 CPUs
[    0.026998] Total of 1 processors activated (3458.64 BogoMIPS).
[    0.027016] sizeof(vma)=88 bytes
[    0.027019] sizeof(page)=32 bytes
[    0.027021] sizeof(inode)=360 bytes
[    0.027023] sizeof(dentry)=128 bytes
[    0.027025] sizeof(ext3inode)=516 bytes
[    0.027027] sizeof(ext4inode)=608 bytes
[    0.027029] sizeof(buffer_head)=56 bytes
[    0.027031] sizeof(skbuff)=192 bytes
[    0.027033] sizeof(task_struct)=3216 bytes
[    0.028149] devtmpfs: initialized
[    0.028539] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[    0.030010] atomic64 test passed for i586+ platform with CX8 and with SSE
[    0.030046] Time: 15:58:22  Date: 07/05/11
[    0.030199] NET: Registered protocol family 16
[    0.030494] ACPI: bus type pci registered
[    0.030778] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.030783] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.030786] PCI: Using MMCONFIG for extended config space
[    0.030788] PCI: Using configuration type 1 for base access
[    0.032796] bio: create slab <bio-0> at 0
[    0.034619] ACPI: EC: Look up EC in DSDT
[    0.060070] ACPI: Interpreter enabled
[    0.060079] ACPI: (supports S0 S3 S4 S5)
[    0.060102] ACPI: Using IOAPIC for interrupt routing
[    0.061530] ACPI: Power Resource [C1D0] (on)
[    0.062472] ACPI: Power Resource [C1A9] (on)
[    0.063070] ACPI: Power Resource [C1B1] (on)
[    0.063681] ACPI: Power Resource [C1B8] (on)
[    0.064492] ACPI: Power Resource [C1C8] (on)
[    0.070715] ACPI: Power Resource [C251] (off)
[    0.070808] ACPI: Power Resource [C252] (off)
[    0.070897] ACPI: Power Resource [C253] (off)
[    0.070986] ACPI: Power Resource [C254] (off)
[    0.071812] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.072065] ACPI: No dock devices found.
[    0.072068] HEST: Table not found.
[    0.072073] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.076970] ACPI: PCI Root Bridge [C002] (domain 0000 [bus 00-ff])
[    0.086595] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.086600] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.086603] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.086607] pci_root PNP0A08:00: host bridge window [mem 0x3f800000-0xfec00fff]
[    0.086611] pci_root PNP0A08:00: host bridge window [mem 0xfec02000-0xffffffff]
[    0.086614] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.086631] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
[    0.086675] pci 0000:00:02.0: [8086:2592] type 0 class 0x000300
[    0.086687] pci 0000:00:02.0: reg 10: [mem 0xd0400000-0xd047ffff]
[    0.086694] pci 0000:00:02.0: reg 14: [io  0x5000-0x5007]
[    0.086701] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[    0.086708] pci 0000:00:02.0: reg 1c: [mem 0xd0480000-0xd04bffff]
[    0.086740] pci 0000:00:02.1: [8086:2792] type 0 class 0x000380
[    0.086750] pci 0000:00:02.1: reg 10: [mem 0xd0500000-0xd057ffff]
[    0.086840] pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604
[    0.086921] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.086927] pci 0000:00:1c.0: PME# disabled
[    0.086958] pci 0000:00:1c.1: [8086:2662] type 1 class 0x000604
[    0.087044] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.087049] pci 0000:00:1c.1: PME# disabled
[    0.087086] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
[    0.087141] pci 0000:00:1d.0: reg 20: [io  0x2020-0x203f]
[    0.087180] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
[    0.087234] pci 0000:00:1d.1: reg 20: [io  0x2040-0x205f]
[    0.087273] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
[    0.087327] pci 0000:00:1d.2: reg 20: [io  0x2060-0x207f]
[    0.087379] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
[    0.087403] pci 0000:00:1d.7: reg 10: [mem 0xd0580000-0xd05803ff]
[    0.087488] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.087494] pci 0000:00:1d.7: PME# disabled
[    0.087517] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.087597] pci 0000:00:1e.2: [8086:266e] type 0 class 0x000401
[    0.087618] pci 0000:00:1e.2: reg 10: [io  0x2100-0x21ff]
[    0.087630] pci 0000:00:1e.2: reg 14: [io  0x2200-0x223f]
[    0.087643] pci 0000:00:1e.2: reg 18: [mem 0xd0581000-0xd05811ff]
[    0.087656] pci 0000:00:1e.2: reg 1c: [mem 0xd0582000-0xd05820ff]
[    0.087706] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[    0.087712] pci 0000:00:1e.2: PME# disabled
[    0.087733] pci 0000:00:1e.3: [8086:266d] type 0 class 0x000703
[    0.087754] pci 0000:00:1e.3: reg 10: [io  0x2400-0x24ff]
[    0.087766] pci 0000:00:1e.3: reg 14: [io  0x2500-0x257f]
[    0.087835] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[    0.087841] pci 0000:00:1e.3: PME# disabled
[    0.087865] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
[    0.087971] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.087981] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.087988] pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 GPIO
[    0.087999] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0500-057f
[    0.088022] pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101
[    0.088039] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.088051] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.088064] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.088076] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.088088] pci 0000:00:1f.1: reg 20: [io  0x2580-0x258f]
[    0.088211] pci 0000:10:00.0: [14e4:167d] type 0 class 0x000200
[    0.088243] pci 0000:10:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit]
[    0.088368] pci 0000:10:00.0: PME# supported from D3hot D3cold
[    0.088375] pci 0000:10:00.0: PME# disabled
[    0.088398] pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.088406] pci 0000:00:1c.0: PCI bridge to [bus 10-10]
[    0.088412] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.088418] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd00fffff]
[    0.088427] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.088485] pci 0000:00:1c.1: PCI bridge to [bus 20-20]
[    0.088491] pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
[    0.088497] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.088506] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.088561] pci 0000:02:04.0: [8086:4220] type 0 class 0x000280
[    0.088589] pci 0000:02:04.0: reg 10: [mem 0xd0100000-0xd0100fff]
[    0.088697] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[    0.088704] pci 0000:02:04.0: PME# disabled
[    0.088732] pci 0000:02:06.0: [104c:8031] type 2 class 0x000607
[    0.088760] pci 0000:02:06.0: reg 10: [mem 0xd0101000-0xd0101fff]
[    0.088791] pci 0000:02:06.0: supports D1 D2
[    0.088794] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.088800] pci 0000:02:06.0: PME# disabled
[    0.088830] pci 0000:02:06.3: [104c:8033] type 0 class 0x000180
[    0.088858] pci 0000:02:06.3: reg 10: [mem 0xd0102000-0xd0103fff]
[    0.088964] pci 0000:02:06.3: supports D1 D2
[    0.088967] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
[    0.088974] pci 0000:02:06.3: PME# disabled
[    0.089006] pci 0000:02:06.4: [104c:8034] type 0 class 0x000805
[    0.089033] pci 0000:02:06.4: reg 10: [mem 0xd0104000-0xd01040ff]
[    0.089050] pci 0000:02:06.4: reg 14: [mem 0xd0105000-0xd01050ff]
[    0.089066] pci 0000:02:06.4: reg 18: [mem 0xd0106000-0xd01060ff]
[    0.089147] pci 0000:02:06.4: supports D1 D2
[    0.089150] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
[    0.089156] pci 0000:02:06.4: PME# disabled
[    0.089182] pci 0000:02:06.5: [104c:8035] type 0 class 0x000780
[    0.089210] pci 0000:02:06.5: reg 10: [mem 0xd0107000-0xd0107fff]
[    0.089226] pci 0000:02:06.5: reg 14: [mem 0xd0108000-0xd0108fff]
[    0.089242] pci 0000:02:06.5: reg 18: [mem 0xd0109000-0xd0109fff]
[    0.089259] pci 0000:02:06.5: reg 1c: [mem 0xd010a000-0xd010afff]
[    0.089326] pci 0000:02:06.5: supports D1 D2
[    0.089329] pci 0000:02:06.5: PME# supported from D0 D1 D2 D3hot
[    0.089336] pci 0000:02:06.5: PME# disabled
[    0.089398] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[    0.089404] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.089410] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd03fffff]
[    0.089419] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.089423] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.089427] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.089431] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.089435] pci 0000:00:1e.0:   bridge window [mem 0x3f800000-0xfec00fff] (subtractive decode)
[    0.089439] pci 0000:00:1e.0:   bridge window [mem 0xfec02000-0xffffffff] (subtractive decode)
[    0.089443] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.089501] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[    0.089524] pci_bus 0000:00: on NUMA node 0
[    0.089529] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
[    0.089766] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C06D._PRT]
[    0.089935] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C006._PRT]
[    0.090024] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0DE._PRT]
[    0.090141]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.107005] ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
[    0.107126] ACPI: PCI Interrupt Link [C0DB] (IRQs 10 *11)
[    0.107244] ACPI: PCI Interrupt Link [C0DC] (IRQs 10 *11)
[    0.107362] ACPI: PCI Interrupt Link [C0DD] (IRQs *10 11)
[    0.107484] ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11)
[    0.107602] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 *11)
[    0.107719] ACPI: PCI Interrupt Link [C0F2] (IRQs *10 11)
[    0.107769] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20110112/pci_link-184)
[    0.107902] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.107914] vgaarb: loaded
[    0.108094] SCSI subsystem initialized
[    0.108164] libata version 3.00 loaded.
[    0.108238] usbcore: registered new interface driver usbfs
[    0.108258] usbcore: registered new interface driver hub
[    0.108291] usbcore: registered new device driver usb
[    0.108427] PCI: Using ACPI for IRQ routing
[    0.108430] PCI: pci_cache_line_size set to 64 bytes
[    0.108521] Expanded resource reserved due to conflict with PCI Bus 0000:00
[    0.108526] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.108529] reserve RAM buffer: 000000003f7d0000 - 000000003fffffff 
[    0.108710] NetLabel: Initializing
[    0.108713] NetLabel:  domain hash size = 128
[    0.108715] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.108733] NetLabel:  unlabeled traffic allowed by default
[    0.108870] hpet clockevent registered
[    0.108875] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.108882] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.108888] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.111033] Switching to clocksource hpet
[    0.111988] Switched to NOHz mode on CPU #0
[    0.123533] pnp: PnP ACPI init
[    0.123568] ACPI: bus type pnp registered
[    0.123732] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.123736] pnp 00:00: [mem 0x000e0000-0x000fffff]
[    0.123740] pnp 00:00: [mem 0x00100000-0x3f7fffff]
[    0.123830] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.123835] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.123839] system 00:00: [mem 0x00100000-0x3f7fffff] could not be reserved
[    0.123845] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.128699] pnp 00:01: [bus 00-ff]
[    0.128704] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.128707] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.128711] pnp 00:01: [io  0x0d00-0xffff window]
[    0.128714] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.128718] pnp 00:01: [mem 0x3f800000-0xfec00fff window]
[    0.128721] pnp 00:01: [mem 0xfec02000-0xffffffff window]
[    0.128725] pnp 00:01: [mem 0x000d0000-0x000dffff window]
[    0.128845] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.129616] pnp 00:02: [io  0x03f8-0x03ff]
[    0.129634] pnp 00:02: [irq 4]
[    0.129719] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[    0.130396] pnp 00:03: [io  0x03e8-0x03ef]
[    0.130400] pnp 00:03: [io  0x0100-0x010f]
[    0.130407] pnp 00:03: [irq 3]
[    0.130410] pnp 00:03: [dma 3]
[    0.130512] pnp 00:03: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active)
[    0.131169] pnp 00:04: [io  0x0378-0x037f]
[    0.131172] pnp 00:04: [io  0x0778-0x077a]
[    0.131179] pnp 00:04: [irq 7]
[    0.131182] pnp 00:04: [dma 1]
[    0.131318] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.131396] pnp 00:05: [io  0x0560-0x056f]
[    0.131399] pnp 00:05: [io  0x0570-0x057f]
[    0.131444] pnp 00:05: Plug and Play ACPI device, IDs IFX0101 (active)
[    0.131458] pnp 00:06: [io  0x00f0-0x00ff]
[    0.131466] pnp 00:06: [irq 13]
[    0.131511] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.131527] pnp 00:07: [io  0x0000-0x000f]
[    0.131530] pnp 00:07: [io  0x0080-0x008f]
[    0.131533] pnp 00:07: [io  0x00c0-0x00df]
[    0.131536] pnp 00:07: [dma 4]
[    0.131584] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.131597] pnp 00:08: [io  0x0061]
[    0.131642] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.131656] pnp 00:09: [io  0x0070-0x0071]
[    0.131659] pnp 00:09: [io  0x0072-0x0073]
[    0.131666] pnp 00:09: [irq 8]
[    0.131710] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.131723] pnp 00:0a: [io  0x0060]
[    0.131726] pnp 00:0a: [io  0x0064]
[    0.131732] pnp 00:0a: [irq 1]
[    0.131781] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.131798] pnp 00:0b: [irq 12]
[    0.131846] pnp 00:0b: Plug and Play ACPI device, IDs SYN010e SYN0100 SYN0002 PNP0f13 (active)
[    0.131990] pnp 00:0c: [io  0x0010-0x001f]
[    0.131993] pnp 00:0c: [io  0x0024-0x003f]
[    0.131996] pnp 00:0c: [io  0x004e-0x004f]
[    0.131999] pnp 00:0c: [io  0x0050-0x0053]
[    0.132014] pnp 00:0c: [io  0x0063]
[    0.132017] pnp 00:0c: [io  0x0065]
[    0.132020] pnp 00:0c: [io  0x0067]
[    0.132023] pnp 00:0c: [io  0x0074-0x0077]
[    0.132026] pnp 00:0c: [io  0x0090-0x009f]
[    0.132029] pnp 00:0c: [io  0x00a4-0x00bd]
[    0.132031] pnp 00:0c: [io  0x0500-0x055f]
[    0.132035] pnp 00:0c: [mem 0xffb00000-0xffbfffff]
[    0.132038] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[    0.132125] system 00:0c: [io  0x0500-0x055f] has been reserved
[    0.132129] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.132134] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[    0.132138] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.132927] pnp 00:0d: [io  0x04d0-0x04d1]
[    0.132931] pnp 00:0d: [io  0x1000-0x107f]
[    0.132934] pnp 00:0d: [io  0x1100-0x113f]
[    0.132937] pnp 00:0d: [io  0x1200-0x121f]
[    0.132940] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[    0.132943] pnp 00:0d: [mem 0xfec00000-0xfec000ff]
[    0.132946] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[    0.132949] pnp 00:0d: [mem 0xfed90000-0xfed9afff]
[    0.133054] system 00:0d: [io  0x04d0-0x04d1] has been reserved
[    0.133058] system 00:0d: [io  0x1000-0x107f] has been reserved
[    0.133062] system 00:0d: [io  0x1100-0x113f] has been reserved
[    0.133066] system 00:0d: [io  0x1200-0x121f] has been reserved
[    0.133070] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.133075] system 00:0d: [mem 0xfec00000-0xfec000ff] could not be reserved
[    0.133079] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.133083] system 00:0d: [mem 0xfed90000-0xfed9afff] has been reserved
[    0.133087] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.133369] pnp 00:0e: [mem 0xfeda0000-0xfedbffff]
[    0.133373] pnp 00:0e: [mem 0xfec01000-0xfec01fff]
[    0.133459] system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
[    0.133463] system 00:0e: [mem 0xfec01000-0xfec01fff] has been reserved
[    0.133468] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.133485] pnp: PnP ACPI: found 15 devices
[    0.133487] ACPI: ACPI bus type pnp unregistered
[    0.171315] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[    0.171321] pci 0000:00:1c.0: BAR 15: assigned [mem 0x3f800000-0x3f9fffff 64bit pref]
[    0.171326] pci 0000:00:1c.1: BAR 14: assigned [mem 0x3fa00000-0x3fbfffff]
[    0.171331] pci 0000:00:1c.1: BAR 15: assigned [mem 0x3fc00000-0x3fdfffff 64bit pref]
[    0.171337] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.171342] pci 0000:00:1c.1: BAR 13: assigned [io  0x4000-0x4fff]
[    0.171348] pci 0000:00:1e.0: BAR 13: assigned [io  0x6000-0x6fff]
[    0.171351] pci 0000:00:1c.0: PCI bridge to [bus 10-10]
[    0.171356] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.171364] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd00fffff]
[    0.171370] pci 0000:00:1c.0:   bridge window [mem 0x3f800000-0x3f9fffff 64bit pref]
[    0.171379] pci 0000:00:1c.1: PCI bridge to [bus 20-20]
[    0.171383] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.171391] pci 0000:00:1c.1:   bridge window [mem 0x3fa00000-0x3fbfffff]
[    0.171397] pci 0000:00:1c.1:   bridge window [mem 0x3fc00000-0x3fdfffff 64bit pref]
[    0.171409] pci 0000:02:06.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[    0.171415] pci 0000:02:06.0: BAR 16: assigned [mem 0x44000000-0x47ffffff]
[    0.171419] pci 0000:02:06.0: BAR 13: assigned [io  0x6000-0x60ff]
[    0.171423] pci 0000:02:06.0: BAR 14: assigned [io  0x6400-0x64ff]
[    0.171428] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[    0.171431] pci 0000:02:06.0:   bridge window [io  0x6000-0x60ff]
[    0.171438] pci 0000:02:06.0:   bridge window [io  0x6400-0x64ff]
[    0.171445] pci 0000:02:06.0:   bridge window [mem 0x40000000-0x43ffffff pref]
[    0.171452] pci 0000:02:06.0:   bridge window [mem 0x44000000-0x47ffffff]
[    0.171459] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[    0.171464] pci 0000:00:1e.0:   bridge window [io  0x6000-0x6fff]
[    0.171471] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd03fffff]
[    0.171477] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0x43ffffff pref]
[    0.171500] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.171508] pci 0000:00:1c.0: setting latency timer to 64
[    0.171518] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.171524] pci 0000:00:1c.1: setting latency timer to 64
[    0.171533] pci 0000:00:1e.0: setting latency timer to 64
[    0.171545] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.171554] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.171557] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.171561] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.171564] pci_bus 0000:00: resource 7 [mem 0x3f800000-0xfec00fff]
[    0.171568] pci_bus 0000:00: resource 8 [mem 0xfec02000-0xffffffff]
[    0.171571] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff]
[    0.171575] pci_bus 0000:10: resource 0 [io  0x3000-0x3fff]
[    0.171578] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd00fffff]
[    0.171582] pci_bus 0000:10: resource 2 [mem 0x3f800000-0x3f9fffff 64bit pref]
[    0.171585] pci_bus 0000:20: resource 0 [io  0x4000-0x4fff]
[    0.171589] pci_bus 0000:20: resource 1 [mem 0x3fa00000-0x3fbfffff]
[    0.171592] pci_bus 0000:20: resource 2 [mem 0x3fc00000-0x3fdfffff 64bit pref]
[    0.171596] pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
[    0.171599] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd03fffff]
[    0.171603] pci_bus 0000:02: resource 2 [mem 0x40000000-0x43ffffff pref]
[    0.171606] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.171610] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.171613] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.171617] pci_bus 0000:02: resource 7 [mem 0x3f800000-0xfec00fff]
[    0.171620] pci_bus 0000:02: resource 8 [mem 0xfec02000-0xffffffff]
[    0.171623] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff]
[    0.171627] pci_bus 0000:03: resource 0 [io  0x6000-0x60ff]
[    0.171630] pci_bus 0000:03: resource 1 [io  0x6400-0x64ff]
[    0.171634] pci_bus 0000:03: resource 2 [mem 0x40000000-0x43ffffff pref]
[    0.171637] pci_bus 0000:03: resource 3 [mem 0x44000000-0x47ffffff]
[    0.171756] NET: Registered protocol family 2
[    0.171894] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.172191] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.173243] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.173869] TCP: Hash tables configured (established 131072 bind 65536)
[    0.173873] TCP reno registered
[    0.173880] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.173904] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.174430] NET: Registered protocol family 1
[    0.174459] pci 0000:00:02.0: Boot video device
[    0.174586] PCI: CLS 64 bytes, default 64
[    0.174678] Trying to unpack rootfs image as initramfs...
[    0.714811] Freeing initrd memory: 13688k freed
[    0.726900] apm: BIOS not found.
[    0.727270] audit: initializing netlink socket (disabled)
[    0.727293] type=2000 audit(1309881502.726:1): initialized
[    0.738902] highmem bounce pool size: 64 pages
[    0.738909] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.741798] VFS: Disk quotas dquot_6.5.2
[    0.742063] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.743307] msgmni has been set to 1715
[    0.743450] SELinux:  Registering netfilter hooks
[    0.743810] NET: Registered protocol family 38
[    0.743910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.743963] io scheduler noop registered
[    0.743966] io scheduler deadline registered
[    0.743989] io scheduler cfq registered (default)
[    0.744126] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.744186] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.744275] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.744324] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.744452] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.744508] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.744511] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.744868] acpiphp: Slot [1] registered
[    0.747057] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.747170] ACPI: AC Adapter [C175] (on-line)
[    0.747401] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[    0.747408] ACPI: Sleep Button [C1F1]
[    0.747488] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.747533] ACPI: Lid Switch [C1F2]
[    0.747607] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.747612] ACPI: Power Button [PWRF]
[    0.747737] ACPI: Fan [C255] (off)
[    0.747819] ACPI: Fan [C256] (off)
[    0.747900] ACPI: Fan [C257] (off)
[    0.747988] ACPI: Fan [C258] (off)
[    0.748231] ACPI: acpi_idle registered with cpuidle
[    0.748532] Marking TSC unstable due to TSC halts in idle
[    0.789821] thermal LNXTHERM:00: registered as thermal_zone0
[    0.789825] ACPI: Thermal Zone [TZ1] (40 C)
[    0.804065] thermal LNXTHERM:01: registered as thermal_zone1
[    0.804068] ACPI: Thermal Zone [TZ2] (27 C)
[    0.816114] thermal LNXTHERM:02: registered as thermal_zone2
[    0.816117] ACPI: Thermal Zone [TZ3] (27 C)
[    0.820282] thermal LNXTHERM:03: registered as thermal_zone3
[    0.820285] ACPI: Thermal Zone [TZ4] (52 C)
[    0.820303] ERST: Table is not found!
[    0.820355] isapnp: Scanning for PnP cards...
[    1.178009] isapnp: No Plug & Play device found
[    1.178541] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.199296] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.220093] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    1.240997] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.241277] serial 0000:00:1e.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    1.241285] serial 0000:00:1e.3: PCI INT B disabled
[    1.241525] Non-volatile memory driver v1.3
[    1.241528] Linux agpgart interface v0.103
[    1.241646] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[    1.241695] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.242368] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.242535] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.245563] brd: module loaded
[    1.246530] loop: module loaded
[    1.246690] ata_piix 0000:00:1f.1: version 2.13
[    1.246710] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.246753] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.247285] scsi0 : ata_piix
[    1.247403] scsi1 : ata_piix
[    1.248031] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2580 irq 14
[    1.248035] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2588 irq 15
[    1.248129] Fixed MDIO Bus: probed
[    1.248197] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.248222] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.248239] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.248244] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.248318] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.248358] ehci_hcd 0000:00:1d.7: debug port 1
[    1.252250] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.252302] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0580000
[    1.258226] ata2: port disabled. ignoring.
[    1.264019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.264073] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.264077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.264080] usb usb1: Product: EHCI Host Controller
[    1.264084] usb usb1: Manufacturer: Linux 2.6.38.8-32.fc15.i686 ehci_hcd
[    1.264087] usb usb1: SerialNumber: 0000:00:1d.7
[    1.264235] hub 1-0:1.0: USB hub found
[    1.264243] hub 1-0:1.0: 8 ports detected
[    1.264372] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.264391] uhci_hcd: USB Universal Host Controller Interface driver
[    1.264421] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.264429] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.264433] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.264491] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.264523] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002020
[    1.264564] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.264568] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.264572] usb usb2: Product: UHCI Host Controller
[    1.264575] usb usb2: Manufacturer: Linux 2.6.38.8-32.fc15.i686 uhci_hcd
[    1.264578] usb usb2: SerialNumber: 0000:00:1d.0
[    1.264724] hub 2-0:1.0: USB hub found
[    1.264730] hub 2-0:1.0: 2 ports detected
[    1.264822] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.264831] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.264835] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.264893] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.264933] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00002040
[    1.264973] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.264977] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.264980] usb usb3: Product: UHCI Host Controller
[    1.264983] usb usb3: Manufacturer: Linux 2.6.38.8-32.fc15.i686 uhci_hcd
[    1.264986] usb usb3: SerialNumber: 0000:00:1d.1
[    1.265157] hub 3-0:1.0: USB hub found
[    1.265162] hub 3-0:1.0: 2 ports detected
[    1.265261] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.265269] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.265273] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.265335] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.265373] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002060
[    1.265421] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.265424] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.265428] usb usb4: Product: UHCI Host Controller
[    1.265431] usb usb4: Manufacturer: Linux 2.6.38.8-32.fc15.i686 uhci_hcd
[    1.265434] usb usb4: SerialNumber: 0000:00:1d.2
[    1.265576] hub 4-0:1.0: USB hub found
[    1.265581] hub 4-0:1.0: 2 ports detected
[    1.265761] i8042: PNP: PS/2 Controller [PNP0303:C1C5,PNP0f13:C1C6] at 0x60,0x64 irq 1,12
[    1.267428] i8042: Detected active multiplexing controller, rev 1.1
[    1.268171] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.268179] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.268225] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.268270] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.268311] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.268450] mousedev: PS/2 mouse device common for all mice
[    1.268720] rtc_cmos 00:09: RTC can wake from S4
[    1.268785] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[    1.268817] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.268927] device-mapper: uevent: version 1.0.3
[    1.269078] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel
[    1.269180] cpuidle: using governor ladder
[    1.269253] cpuidle: using governor menu
[    1.269508] usbcore: registered new interface driver usbhid
[    1.269511] usbhid: USB HID core driver
[    1.269534] nf_conntrack version 0.5.0 (15899 buckets, 63596 max)
[    1.269773] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.269793] TCP cubic registered
[    1.269795] Initializing XFRM netlink socket
[    1.269806] NET: Registered protocol family 17
[    1.269826] Registering the dns_resolver key type
[    1.269852] Using IPI No-Shortcut mode
[    1.270017] PM: Hibernation image not present or could not be loaded.
[    1.270038] registered taskstats version 1
[    1.270091] IMA: No TPM chip found, activating TPM-bypass!
[    1.270421]   Magic number: 3:414:992
[    1.270521] rtc_cmos 00:09: setting system clock to 2011-07-05 15:58:23 UTC (1309881503)
[    1.270572] Initalizing network drop monitor service
[    1.286250] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.286259] ACPI: Battery Slot [C177] (battery present)
[    1.286365] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.286374] ACPI: Battery Slot [C176] (battery absent)
[    1.291268] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.415397] ata1.00: ATA-6: FUJITSU MHV2040AH, 00830096, max UDMA/100
[    1.415401] ata1.00: 78140160 sectors, multi 16: LBA 
[    1.415410] ata1.01: ATAPI: UJDA765aDVD/CDRW, 1.02, max MWDMA2
[    1.437282] ata1.00: configured for UDMA/100
[    1.443406] ata1.01: configured for MWDMA2
[    1.443833] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2040A 0083 PQ: 0 ANSI: 5
[    1.444064] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.444871] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.444946] sd 0:0:0:0: [sda] Write Protect is off
[    1.444950] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.444982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.445899] scsi 0:0:1:0: CD-ROM            MATSHITA UJDA765aDVD/CDRW 1.02 PQ: 0 ANSI: 5
[    1.467646] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.467650] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.467792] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.467880] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.496591]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    1.497480] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.497506] Freeing unused kernel memory: 568k freed
[    1.497864] Write protecting the kernel text: 3956k
[    1.497912] Write protecting the kernel read-only data: 1912k
[    1.533703] dracut: dracut-009-11.fc15
[    1.543752] dracut: rd.luks=0: removing cryptoluks activation
[    1.546634] dracut: rd.lvm=0: removing LVM activation
[    1.554520] udev[98]: starting version 167
[    1.592537] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    1.592639] ACPI: Video Device [C05A] (multi-head: yes  rom: no  post: no)
[    1.686468] [drm] Initialized drm 1.1.0 20060810
[    1.726360] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.726368] i915 0000:00:02.0: setting latency timer to 64
[    1.731564] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.731569] [drm] Driver supports precise vblank timestamp query.
[    1.942020] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    1.943732] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.944183] [drm] initialized overlay support
[    2.020823] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000/0x0
[    2.020832] serio: Synaptics pass-through port at isa0060/serio4/input0
[    2.060407] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[    2.387810] fbcon: inteldrmfb (fb0) is primary device
[    2.411252] Console: switching to colour frame buffer device 128x48
[    2.416342] fb0: inteldrmfb frame buffer device
[    2.416344] drm: registered panic notifier
[    2.416558] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.463708] dracut: Starting plymouth daemon
[    2.972156] dracut: rd.dm=0: removing DM RAID activation
[    2.983150] dracut: rd.md=0: removing MD RAID activation
[    3.265347] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:0944]
[    3.265372] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[    3.265380] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[    3.265383] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[    3.265390] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01111b22, devctl 0x64
[    3.312507] sdhci: Secure Digital Host Controller Interface driver
[    3.312511] sdhci: Copyright(c) Pierre Ossman
[    3.489200] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
[    3.489207] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[    3.489212] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[    3.489225] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x6000-0x6fff]
[    3.489230] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x6fff: excluding 0x6000-0x60ff 0x6400-0x64ff
[    3.495349] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xd0100000-0xd03fffff]
[    3.495354] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0100000-0xd03fffff: excluding 0xd0100000-0xd012ffff
[    3.495375] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x43ffffff pref]
[    3.495379] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x43ffffff: excluding 0x40000000-0x43ffffff
[    3.495917] sdhci-pci 0000:02:06.4: SDHCI controller found [104c:8034] (rev 0)
[    3.495937] sdhci-pci 0000:02:06.4: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    3.496054] Registered led device: mmc0::
[    3.496113] mmc0: SDHCI controller on PCI [0000:02:06.4] using PIO
[    3.496167] Registered led device: mmc1::
[    3.496219] mmc1: SDHCI controller on PCI [0000:02:06.4] using PIO
[    3.496276] Registered led device: mmc2::
[    3.496319] mmc2: SDHCI controller on PCI [0000:02:06.4] using PIO
[    4.477988] usb 3-2: New USB device found, idVendor=03f0, idProduct=011d
[    4.477993] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.477997] usb 3-2: Product: HP integrated Bluetooth module
[    4.478000] usb 3-2: Manufacturer: Broadcom
[    4.603988] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.697623] dracut: Checking filesystems
[    4.697657] dracut: fsck -T -t noopts=_netdev -A -a
[    4.727487] psmouse serio5: ID: 10 00 64
[    4.763147] dracut: _Fedora-15-i686-: clean, 91307/966656 files, 715264/3840000 blocks
[    4.763294] dracut: Remounting /dev/disk/by-uuid/3a9301c1-b165-4e07-a3e5-c74d263137be with -o ro,
[    4.859480] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.879356] dracut: Mounted root filesystem /dev/sda2
[    5.011388] dracut: Switching root
[    5.682553] SELinux:  Disabled at runtime.
[    5.682586] SELinux:  Unregistering netfilter hooks
[    5.682598] type=1404 audit(1309881507.910:2): selinux=0 auid=4294967295 ses=4294967295
[    5.731764] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[    6.080484] NET: Registered protocol family 10
[    6.117663] systemd[1]: Set hostname to <hp-compaq-nc6220>.
[    7.372318] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input6
[    7.915180] systemd-readahead-replay[371]: Bumped block_nr parameter of /dev/sda to 16384. This is a temporary hack and should be removed one day.
[    9.716988] EXT4-fs (sda2): re-mounted. Opts: (null)
[   17.238491] udev[396]: starting version 167
[   17.809324] tpm_inf_pnp 00:05: Found C1BA with ID IFX0101
[   17.809379] tpm_inf_pnp 00:05: TPM found: config base 0x560, data base 0x570, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1)
[   17.827300] wmi: Mapper loaded
[   17.831596] intel_rng: FWH not detected
[   17.903593] iTCO_vendor_support: vendor-support=0
[   17.996382] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   18.017556] tg3.c:v3.116 (December 3, 2010)
[   18.017588] tg3 0000:10:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.017602] tg3 0000:10:00.0: setting latency timer to 64
[   18.034982] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   18.035128] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[   18.035224] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   18.045548]  excluding 0x170-0x177 0x1f0-0x1f7
[   18.047771] lib80211: common routines for IEEE802.11 drivers
[   18.047775] lib80211_crypt: registered algorithm 'NULL'
[   18.087863]  0x370-0x37f
[   18.088041] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
[   18.088946] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   18.150290] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   18.179629] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[   18.179704] microcode: Microcode Update Driver: v2.00 <tigran.co.uk>, Peter Oruba
[   18.194360] NET: Registered protocol family 23
[   18.195075] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[   18.195158] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   18.195230] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[   18.195308] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   18.217696] tifm_7xx1 0000:02:06.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   18.219050] parport_pc 00:04: reported by Plug and Play ACPI
[   18.219121] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   18.237520] found SMC SuperIO Chip (devid=0x7a rev=00 base=0x004e): LPC47N227
[   18.237545] smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 3, mode: 0x0e
[   18.237550] smsc_ircc_present: can't get sir_base of 0x3e8
[   18.269882] cfg80211: Calling CRDA to update world regulatory domain
[   18.277620] tg3 0000:10:00.0: eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:14:c2:e5:30:d9
[   18.277627] tg3 0000:10:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[   18.277632] tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   18.277636] tg3 0000:10:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   18.281080] libipw: 802.11 data/management/control stack, git-1.1.13
[   18.281084] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno.com>
[   18.294174] cfg80211: World regulatory domain updated:
[   18.294178] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.294182] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.294186] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.294190] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.294194] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.294198] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.303807] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   18.303811] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   18.303947] ipw2200 0000:02:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   18.311603] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   18.349131] ppdev: user-space parallel port driver
[   18.453849] ipw2200: Radio Frequency Kill Switch is On:
[   18.453851] Kill switch must be turned off for wireless networking to work.
[   18.458671] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[   18.599405] Bluetooth: Core ver 2.15
[   18.599436] NET: Registered protocol family 31
[   18.599439] Bluetooth: HCI device and connection manager initialized
[   18.599443] Bluetooth: HCI socket layer initialized
[   18.599805] Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[   18.599826] Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
[   18.606080] Intel ICH 0000:00:1e.2: power state changed by ACPI to D0
[   18.606087] Intel ICH 0000:00:1e.2: power state changed by ACPI to D0
[   18.606098] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   18.606153] Intel ICH 0000:00:1e.2: setting latency timer to 64
[   18.821348] cfg80211: Calling CRDA for country: US
[   18.826863] cfg80211: Regulatory domain changed to country: US
[   18.826866] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.826871] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.826875] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   18.826879] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.826883] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.826887] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.826890] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   18.885438] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   18.888019] usbcore: registered new interface driver btusb
[   19.522039] intel8x0_measure_ac97_clock: measured 50405 usecs (2429 samples)
[   19.522043] intel8x0: clocking to 48000
[   22.850590] Adding 2045948k swap on /dev/sda5.  Priority:0 extents:1 across:2045948k 
[   22.987090] systemd-fsck[637]: /dev/sda1: clean, 42/128000 files, 26873/512000 blocks
[   23.319810] systemd-fsck[642]: /dev/sda3: clean, 526/1226400 files, 139256/4903424 blocks
[   23.567697] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   23.632227] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   23.690798] NetworkManager[702]: <info> NetworkManager (version 0.8.9997-4.git20110620.fc15) is starting...
[   23.714285] abrtd[708]: Unrecognized variable 'DumpLocation' in '/etc/abrt/abrt.conf'
[   23.722823] avahi-daemon[706]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
[   24.029899] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   24.250258] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.636625] 802.1Q VLAN Support v1.8 Ben Greear <greearb>
[   24.636630] All bugs added by David S. Miller <davem>
[   25.821992] tg3 0000:10:00.0: eth0: Link is up at 100 Mbps, full duplex
[   25.821998] tg3 0000:10:00.0: eth0: Flow control is off for TX and off for RX
[   25.839506] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   35.858037] eth0: no IPv6 routers present
[   67.536113] fuse init (API version 7.16)

Comment 3 John W. Linville 2011-07-05 17:37:02 UTC

Did you try toggling the hardware wireless disable switch?  Some devices have a slider switch somewhere along the edge of the laptop.  Others have a function key on the keyboard.  Some have both.  Be sure to look carefully, and try all options.  Note that the hardware switch is not the same as the settings available in NetworkManager.

Comment 4 jimh0713 2011-07-05 20:40:18 UTC

Yes I have done that. The toggle switch is right above the F keys. When it is activated there is a blue background light when it is deactivated there is no blue light.

Comment 5 John W. Linville 2011-07-06 16:51:51 UTC

Please run 'rfkill event', then toggle the wireless disable switch back and forth a few times.  Please post the output logged as a result.

Also, please try 'rfkill unblock all'.  Does that enable the wireless device?

What kernel version were you running prior to the F-15 update?

Comment 6 John W. Linville 2011-07-06 17:00:14 UTC

Please also include the output of this command:

   cat /sys/bus/pci/drivers/ipw2200/00*/rf_kill

Comment 7 David 2011-07-13 02:13:35 UTC

New install FC15 on HP NC6220 wifi N/OP after reboot.

rfkill unblock wifi     works to turn radio on but does not connected with home wifi or other wifi's listed.

current system stat working wifi on Netgear WG111v2 ,sys asking for passkey for
Netgear WG111v2 but notification area states Pro/wireless 2915ABG (calexico2) connecting. when things stabilize notification area states wireless on, Pro/wireless 2915ABG (calexico2) off,  Netgear WG111v2 on.

Comment 8 Walter Neumann 2011-08-08 15:52:03 UTC

Could be same as https://bugzilla.redhat.com/show_bug.cgi?id=729047 ? Is kworker taking most of cpu after wireless is stuck?

Comment 9 jimh0713 2011-08-09 00:31:35 UTC

Please close out my bug report I could not get the wireless working so I ended up installing Windows 7 and everything seems to be working including wireless.

Comment 10 John W. Linville 2011-08-24 15:38:29 UTC

Closing based on comment 9.  If others are having this issue, please open a new bug -- thanks!