Bug 758947

Description of problem:
I just installed CinePaint on my computer, a SONY PC with Fedora Linux
version 14, GNOME desktop edition, installed on it, with all the latest
security updates for this version (an old version) of the Operating
System. I ran the program for the first time, and got a series of error
messages right up front, in the first run. 



Version-Release number of selected component (if applicable):
Fedora version 14, (GNOME desktop)
CinePaint version 0.22-1



How reproducible:
Completely reproducible



Steps to Reproduce:
1. Install CinePaint version 0.22-1 on a Fedora Linux 14, with a GNOME desktop
2. Update Fedora 14 until there are no longer any more updates for that version
3. Install all of the following software on the system one at a time, in the order mentioned below: 
    a. AbiWord, 
    b. F-Spot photo manager, and 
    c. CinePaint, meeting all of the software dependencies listed in the installer (Add/Remove software component under the System --> Administration "start" menu) 
4. Run CinePaint


Actual results:
- Fedora generated 2 bug report alerts
- CinePaint generated the following error messages:

1)Oyanos cannot find display ICC profile. Using sRGB instead.

2) Error: oyranos_alpha.c:14955 oyProfile_FromStd()
Could not open default ICC profile: "sRGB.icc"
You can get them from http://st.net/projects/openicc/
install in the OpenIccDirectory icc path[-1]

3) Cannot colormanage this display. Either image or display profile are
undefined. To avoid this message switch off automatic colormanagement in
File/Preferences/Color Management

4) gdisplay_set_colormanaged: cannot colormanage. no image profile
defined

5) cms_get_profile_from_file: cannot open profile:
coated_FOGRA39L_argl.icc

6) !!! ERROR: File 'coated_FOGRA39L_argl.icc' not found[-1]

7) gimage_set_cms_profile: profile is NULL, Colormanagement switched off
for all displays of this image

8) cms_get_profile_from_file: cannot open profile: sRGB.icc

9) !!! ERROR: File 'sRGB.icc' not found [-1]




Expected results:
To be able to open the CinePaint program without immediately receiving a bunch of error messages from the program and bug alerts from the operating system. 





Additional info:

It may help to know what kind of PC I'm running. The marketing
specifications for my PC where I have Fedora 14 installed are as
follows:

Features:


MODEL: PCV-RS530G
PROCESSOR: Intel® Pentium® 4 Processor 3.20 GHz with Intel®
Hyper-Threading Technology
CACHE MEMORY: 512KB Integrated On-Die Level 2

FRONT SIDE BUS SPEED: 800MHz
RAM: 512MB PC-3200 400MHz DDR (expandable to 2.0GB)
HARD DRIVE: 160GB 7200rpm Ultra ATA/100 Hard Drive
One DVD-RW/CD-RW DRIVE
One DVD-ROM drive without writing capabilities
  CD-RW (16X max. write / 10X max. rewrite / 32X max. read)
  DVD-ROM: 16X max. DVD-ROM Read / 40X max. CD-ROM
read
One FLOPPY DISK DRIVE: 3.5" 1.44MB Floppy Disk Drive
VIDEO & GRAPHICS: ATI RadeonTM 9200
  128MB Video Memory (128-bit DDR)
  VGA-out / DVI-Out (DVI output:1280x1024x60Hz max.)/ TV-Out
  8X AGP 3D Graphics Hardware Acceleration
  Giga PocketTM MPEG2 Realtime Encoder/Decoder board with TV Tuner
ETHERNET: 10Base-T/100Base-TX Ethernet (RJ-45)
MODEM: V.90 compatible data/fax modem (currently using a rented external
cable modem/router to access the internet)
EXPANSION SLOTS: One 8x AGP (occupied by Graphics Card)
  Three PCI (two occupied)
Multi-Media Card Reader: Memory StickTM, Compact FlashTM Type I and Type
II, IBM Micro DriveTM, and Smart MediaTM
EXPANSION BAYS:
  Two 5.25" Half-Height (occupied)
  One External 3.5" (occupied)
  Two Internal 3.5" (one occupied)
PORT CONNECTORS:
  Seven USB 2.0 (three front/four rear)
  Two PS/2® (Mouse/Keyboard)
  One VGA/DVI Monitor Port / TV-Out
  One S/PDIF Out / One Parallel Port / One Line In
  One 6pin i.LINK Port (rear)/ One 4pin (front)
  One Headphone / One Microphone
  S-Video: Two Inputs (front and rear)
  Composite Video / Audio Inputs (front and rear)
  Stereo Line Input/Output
  Coaxial Input (VHF/UHF)
ACCESSORIES
  Speakers (Stereo)
  Microphone: Model # DX-M1111
  IR Remote Control and Receiver
  Keyboard: ABTN2, Brazilian Portuguese Language
  VAIO PS/2® Mouse
  Printer: HP Officejet J4550 All-in-one (Small device that fits on top
of a desk and is both a printer, a fax machine, a copier and a scanner)
  A Wacom drawing/handwriting tablet with mouse and pressure sensitive
stylus
  A small Digital Camera
POWER REQUIREMENTS:
  100-120V 4.7A (50/60Hz)
POWER MANAGEMENT:
  ACPI 1.0 Compliant
DIMENSIONS (CPU) & WEIGHT (CPU)
  7.2"(W) x 15.6"(H) x 14.9"(D)
  26.5 lbs.



I tried going to http://st.net/projects/openicc/ to figure out what ICC
profile the error message was telling me to install, and where and how
to go about installing it. However, the URL was a dead-end, as the page
does not exist. What can I do to solve the problem (of the error
messages popping up, indicating bugs)? Is there an update or fix for me
to download?

Thank you;

Nathalia Mota