Description of problem:
At first, install rhev-hypervisor6-6.4-20130501.0.el6_4 into local disk.
Then insert the installation media(CD-ROM/USB), and start the system, When the automatic boot prompt appears, press Enter.
Automatic boot in 30 seconds...
Select the "Boot from Local Drive" option, and press Enter.
Actually it boot the operating system installed on the first local drive failed.
Version-Release number of selected component (if applicable):
rhev-hypervisor6-6.4-20130501.0.el6_4
rhev-hypervisor-advanced-6.4-20130513.0.el6ev.noarch
How reproducible:
100%
Steps to Reproduce:
1.At first, install rhev-hypervisor6-6.4-20130501.0.el6_4 into local disk.
2.Insert the installation media(CD-ROM/USB), and start the system.
3.Start the system. When the automatic boot prompt appears, press Enter.
Automatic boot in 30 seconds...
4.Select the "Boot from Local Drive" option, and press Enter.
Actual results:
It boot the operating system installed on the first local drive failed.
Expected results:
When selectting the "Boot from Local Drive" option, it should be success to
boot the operating system installed on the first local drive
Additional info:
I suspect this may not be fixable. I would try (on the same machine) booting a rhel or fedora cd and choose "boot from local drive" to see if that fails as well.
(In reply to comment #2)
> I suspect this may not be fixable. I would try (on the same machine)
> booting a rhel or fedora cd and choose "boot from local drive" to see if
> that fails as well.
Hey mburns,
Tried to boot rhel 6.4 and fedora 18 cd media and choose "boot from local drive" option, check that:
rhel 6.4 --Failed
fedora 18 --Failed
Ok, that's what I expected. This is something that we can't fix for all hardware, unfortunately.
Similar to our option for serial console, it's a best effort that will work for some machines, but won't for others.