Created attachment 834188 [details] info test results Description of problem: Kernel is 2.6.32-431 and not Red Hat Enterprise Linux Server 6.5 GA (None) Error: kernel is tainted (value = 268435456) We use below configuration Test machine: Intel QM87 chipset+intel CPU i7-4800MQ OS: RHEL server v2.6.32-431.el6.x86_64 GNOME2.28.2 Test suite: v7-1.6.4-22.el6, v7-server-1.6.4-22.el6, dt-15.14-2.EL6, stress-0.18.8-1.3.EL6, lmbench-3.0a7-6a.EL6 Steps to Reproduce: 1. Install RHEL server v2.6.32-431.el6.x86_64 GNOME2.28.2 to test machine 2. Install v7 Test suite 3. Run info test as below: v7 run --test=info --debug=low Actual results: Fail Expected results: Pass
Hi, The 1st error happens because the test suite could not reach out to the partner ftp site and the current level of the hwcert-client-info package has not been installed. With either hwcert-client-info-1.6.5-32 installed or a route to ftp://partners.redhat.com this issue should clear up. The 2nd error, kernel taint of value 268435456 is unsupported hardware. I'll need to verify but I believe the kernel/boot logs should contain a message about which hardware caused this.
Hi Rob, We fixed 1st error. Please check below boot logs for 2nd error: Welcome to [0;31mRed Hat[0;39m Enterprise Linux Server Starting udev: %G[60G[[0;32m OK [0;39m] Setting hostname localhost.localdomain: [60G[[0;32m OK [0;39m] Setting up Logical Volume Management: No volume groups found [60G[[0;32m OK [0;39m] Checking filesystems /dev/sda2: clean, 379267/6553600 files, 3010703/26214400 blocks /dev/sda1: clean, 41/128016 files, 56903/512000 blocks /dev/sda5: clean, 373/23814144 files, 1548723/95229440 blocks [60G[[0;32m OK [0;39m] Remounting root filesystem in read-write mode: [60G[[0;32m OK [0;39m] Mounting local filesystems: [60G[[0;32m OK [0;39m] Enabling local filesystem quotas: [60G[[0;32m OK [0;39m] Enabling /etc/fstab swaps: [60G[[0;32m OK [0;39m] Entering non-interactive startup Starting systemtap: [60G[[0;33mWARNING[0;39m] Starting sandbox[60G[[0;32m OK [0;39m] Calling the system activity data collector (sadc)... Starting cgconfig service: [60G[[0;32m OK [0;39m] Bringing up loopback interface: [60G[[0;32m OK [0;39m] Bringing up interface eth0: Determining IP information for eth0... done. [60G[[0;32m OK [0;39m] Bringing up interface wlan0: Device does not seem to be present, delaying initialization. [60G[[0;31mFAILED[0;39m] Starting auditd: [60G[[0;32m OK [0;39m] Starting portreserve: [60G[[0;32m OK [0;39m] Starting system logger: [60G[[0;32m OK [0;39m] Starting cachefilesd: /sbin/restorecon: lstat(/dev/cachefiles) failed: No such file or directory Enabling ondemand cpu frequency scaling: [60G[[0;32m OK [0;39m] Starting irqbalance: [60G[[0;32m OK [0;39m] Starting rpcbind: [60G[[0;32m OK [0;39m] Starting cgdcbxd: Starting kdump:[60G[[0;32m OK [0;39m] Starting lldpad: [60G[[0;32m OK [0;39m] Starting FCoE initiator service: [60G[[0;32m OK [0;39m] Starting FCoE Target: Loading modules... done Mounting configfs... done Applying saved config... done [60G[[0;32m OK [0;39m] Starting system message bus: [60G[[0;32m OK [0;39m] Setting network parameters... [60G[[0;32m OK [0;39m] Starting NetworkManager daemon: [60G[[0;32m OK [0;39m] Starting NFS statd: [60G[[0;32m OK [0;39m] Starting cups: [60G[[0;32m OK [0;39m] Starting ibacm daemon:[60G[[0;32m OK [0;39m] Mounting filesystems: [60G[[0;32m OK [0;39m] Starting acpi daemon: [60G[[0;32m OK [0;39m] Starting HAL daemon: [60G[[0;32m OK [0;39m] Retrigger failed udev events[60G[[0;32m OK [0;39m] Starting PC/SC smart card daemon (pcscd): [60G[[0;32m OK [0;39m] Loading autofs4: [60G[[0;32m OK [0;39m] Starting automount: [60G[[0;32m OK [0;39m] Starting NFS services: [60G[[0;32m OK [0;39m] Starting NFS quotas: [60G[[0;32m OK [0;39m] Starting NFS mountd: [60G[[0;32m OK [0;39m] Starting NFS daemon: [60G[[0;32m OK [0;39m] Starting RPC idmapd: [60G[[0;32m OK [0;39m] Enabling Bluetooth devices: Starting mcelog daemon [60G[[0;32m OK [0;39m] Starting sshd: [60G[[0;32m OK [0;39m] Starting xinetd: [60G[[0;32m OK [0;39m] Starting uuidd: [60G[[0;32m OK [0;39m] Starting ipmidetectd: ipmidetectd: No nodes configured [60G[[0;31mFAILED[0;39m] Starting sendmail: [60G[[0;32m OK [0;39m] Starting sm-client: [60G[[0;32m OK [0;39m] Starting abrt daemon: [60G[[0;32m OK [0;39m] Starting ksm: [60G[[0;32m OK [0;39m] Starting console mouse services: [60G[[0;32m OK [0;39m] Starting httpd: [60G[[0;32m OK [0;39m] Starting ksmtuned: [60G[[0;32m OK [0;39m] Starting crond: [60G[[0;32m OK [0;39m] Starting atd: [60G[[0;32m OK [0;39m] Starting trace-cmd: [60G[[0;32m OK [0;39m] Starting libvirtd daemon: [60G[[0;32m OK [0;39m] Starting rhsmcertd...[60G[[0;32m OK [0;39m] Starting up CIM server: [60G[[0;32m OK [0;39m] Starting bmc-watchdog: [60G[[0;32m OK [0;39m] Starting certmonger: [60G[[0;32m OK [0;39m]
Hi Rob, Could you please check and update to us?
Hi, I took a look again in the logs and actually it looks like something triggered a slowpath taint in the kernel from the X driver. The first time X is run, it comes up untainted, encounters a warning, and then slowpath taints. Subsequent runs are then appear as tainted. Jul 8 18:05:10 unused kernel: WARNING: at drivers/gpu/drm/i915/intel_pm.c:4008 gen6_gt_check_fifodbg+0x41/0x60 [i915]() (Not tainted) Jul 8 18:05:10 unused kernel: Hardware name: 4291CL9 Jul 8 18:05:10 unused kernel: MMIO read or write has been dropped 1 ... Jul 8 18:05:10 unused kernel: Pid: 2730, comm: Xorg Not tainted 2.6.32-358.el6.x86_64 #1 Jul 8 18:05:10 unused kernel: Call Trace: Jul 8 18:05:10 unused kernel: [<ffffffff8106e2e7>] ? warn_slowpath_common+0x87/0xc0 ... Jul 8 18:05:10 unused kernel: WARNING: at drivers/gpu/drm/i915/intel_pm.c:4008 gen6_gt_check_fifodbg+0x41/0x60 [i915]() (Tainted: G W --------------- ) To verify this is the info test kernel is tainted issue, if you can set the default runlevel to 3, and then reboot to clear the taint. This should prevent X from starting @ boot allowing the kernel taint value to be checked without X being started. The taint value can be checked via: "cat /proc/sys/kernel/tainted" which should return 0. The info test could then be run via "hwcert-backend run --test info" which should then pass as the kernel isn't tainted. If all of that checks out, X can be started with the "startx" command followed by rerunning the above kernel taint check and info run which would be expected to now fail. This would help us prove or disprove the X slowpath is the cause of kernel tainting + info test run failure. If it is proven to be the cause, the next things to do would be to the RHEL6.5 Xorg driver package and retest, followed by the RHEL6.5 kernel upgrade. If either/both of those clear up the tainting issue we have our solution and will need to discuss options for how to proceed with the certification. If the taint cause in confirmed but the upgrade(s) do(es) not resolve I can get the trace over to our X engineers so they can pin it down further.
Hi Rob, I changed default runlevel to 3, but the tained is still 268435456. I do below steps, please check if any problem: 1. # vim /etc/inittab id:3:initdefault: # runlevel N 3 2. Reboot machine 3. OS is boot to text mode. After login with root user, run commands: # runlevel N 3 # cat /proc/sys/kernel/tainted 268435456
Hi, Hrm, bummer. Your actions and the resulting behavior sounds correct unfortunately it's still tainted and that's not so good. If X didn't come up yet, then it should not be X that caused it. Actually the graphical boot brings up X which would be before the graphical login. To disable the graphical boot if you remove the "rhgb quiet" from the kernel options in grub that should avoid X starting. If that doesn't remove the taint, can you check in dmesg or /var/log/messages after a reboot to see if there is any indication about what caused that taint?
Hi Rob, I find the Hardware is not supported from the log: UNSUPPORTED HARDWARE DEVICE: Haswell HDMI Audio ------------[ cut here ]------------ WARNING: at kernel/rh_taint.c:13 mark_hardware_unsupported+0x39/0x40() (Not tainted) Hardware name: dynabook R734 Your hardware is unsupported. Please do not report bugs, panics, oopses, etc., on this hardware. Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.32-431.el6.x86_64 #1 Call Trace: [<ffffffff81071e27>] ? warn_slowpath_common+0x87/0xc0 [<ffffffff81071ebf>] ? warn_slowpath_fmt_taint+0x3f/0x50 [<ffffffff810a4109>] ? mark_hardware_unsupported+0x39/0x40 [<ffffffff815114cd>] ? quirk_intel_haswell_HD_audio+0x15/0x17 [<ffffffff812a3ec3>] ? pci_fixup_device+0xd3/0x210 [<ffffffff81c56665>] ? pci_apply_final_quirks+0x0/0x35 [<ffffffff812a6725>] ? pci_get_subsys+0x35/0x40 [<ffffffff81c56665>] ? pci_apply_final_quirks+0x0/0x35 [<ffffffff81c5667f>] ? pci_apply_final_quirks+0x1a/0x35 [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0 [<ffffffff81c268e4>] ? kernel_init+0x29b/0x2f7 [<ffffffff8100c20a>] ? child_rip+0xa/0x20 [<ffffffff81c26649>] ? kernel_init+0x0/0x2f7 [<ffffffff8100c200>] ? child_rip+0x0/0x20 ---[ end trace e825611a859d3721 ]--- Full logs as below: Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-431.el6.x86_64 (mockbuild.eng.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Sun Nov 10 22:19:54 EST 2013 Command line: ro root=UUID=8248314f-3fc6-49d7-9151-3d94a1b7d1a0 rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_LVM rd_NO_DM KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cbfb9000 (usable) BIOS-e820: 00000000cbfb9000 - 00000000cbfba000 (ACPI NVS) BIOS-e820: 00000000cbfba000 - 00000000cbfcd000 (reserved) BIOS-e820: 00000000cbfcd000 - 00000000cc0b9000 (ACPI NVS) BIOS-e820: 00000000cc0b9000 - 00000000cc0e9000 (ACPI data) BIOS-e820: 00000000cc0e9000 - 00000000cfa00000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fed80000 - 00000000fed88000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000012f600000 (usable) DMI 2.6 present. SMBIOS version 2.6 @ 0xF4F70 DMI: TOSHIBA dynabook R734/dynabook R734, BIOS Version 2.10 11/02/2013 e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x12f600 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 00FFC00000 mask 7FFFC00000 uncachable 1 base 0000000000 mask 7F80000000 write-back 2 base 0080000000 mask 7FC0000000 write-back 3 base 00C0000000 mask 7FF0000000 write-back 4 base 00CE000000 mask 7FFE000000 uncachable 5 base 00CD800000 mask 7FFF800000 uncachable 6 base 0100000000 mask 7FC0000000 write-back 7 disabled 8 disabled 9 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 4092MB, range: 4MB, type UC reg 1, base: 0GB, range: 2GB, type WB reg 2, base: 2GB, range: 1GB, type WB reg 3, base: 3GB, range: 256MB, type WB reg 4, base: 3296MB, range: 32MB, type UC reg 5, base: 3288MB, range: 8MB, type UC reg 6, base: 4GB, range: 1GB, type WB total RAM covered: 4312M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3GB, range: 256MB, type WB reg 3, base: 3288MB, range: 8MB, type UC reg 4, base: 3296MB, range: 32MB, type UC reg 5, base: 4GB, range: 1GB, type WB e820 update range: 00000000cd800000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcbfb9 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000cbfb9000 0000000000 - 00c0000000 page 1G 00c0000000 - 00cbe00000 page 2M 00cbe00000 - 00cbfb9000 page 4k kernel direct mapping tables up to cbfb9000 @ 8000-b000 init_memory_mapping: 0000000100000000-000000012f600000 0100000000 - 012f600000 page 2M kernel direct mapping tables up to 12f600000 @ a000-c000 RAMDISK: 36f47000 - 37fef7a5 ACPI: RSDP 00000000000f0030 00014 (v00 TOSHIB) ACPI: RSDT 00000000cc0e8038 0005C (v01 TOSHIB A008C 00000002 01000013) ACPI: FACP 00000000cc0e5000 0010C (v05 TOSHIB A008C 00000002 LOHR 0000005F) ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288) ACPI: DSDT 00000000cc0c8000 1241F (v02 TOSHIB A008C 20131030 INTL 20120518) ACPI: FACS 00000000cc0a6000 00040 ACPI: HPET 00000000cc0e4000 00038 (v01 TOSHIB A008C 00000001 LOHR 0000005F) ACPI: APIC 00000000cc0e3000 000BC (v01 TOSHIB A008C 00000001 LOHR 0000005F) ACPI: MCFG 00000000cc0e2000 0003C (v01 TOSHIB A008C 00000001 LOHR 0000005F) ACPI: ASF! 00000000cc0e1000 000A0 (v32 TOSHIB A008C 00000001 LOHR 0000005F) ACPI: BOOT 00000000cc0df000 00028 (v01 TOSHIB A008C 00000000 LOHR 0000005F) ACPI: SLIC 00000000cc0dd000 00176 (v01 TOSHIB A008C 00000000 LOHR 0000005F) ACPI: SSDT 00000000cc0c7000 004F8 (v01 TOSHIB SataAhci 00001000 INTL 20120518) ACPI: SSDT 00000000cc0c4000 00720 (v01 TOSHIB PtidDevc 00001000 INTL 20120518) ACPI: SSDT 00000000cc0bf000 007AB (v01 TOSHIB MacUniq2 00001000 INTL 20120518) ACPI: SSDT 00000000cc0be000 005B5 (v01 PmRef Cpu0Ist 00003000 INTL 20120518) ACPI: SSDT 00000000cc0bd000 00AC4 (v01 PmRef CpuPm 00003000 INTL 20120518) ACPI: SSDT 00000000cc0bc000 00562 (v01 SaSsdt SaSsdt 00003000 INTL 20120518) ACPI: FPDT 00000000cc0db000 00044 (v01 TOSHIB A008C 00000000 LOHR 0000005F) ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. No NUMA configuration found Faking a node at 0000000000000000-000000012f600000 Bootmem setup node 0 0000000000000000-000000012f600000 NODE_DATA [000000000000b000 - 000000000003efff] bootmap [000000000003f000 - 0000000000064ebf] pages 26 (8 early reservations) ==> bootmem [0000000000 - 012f600000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000201faa4] TEXT DATA BSS ==> [0001000000 - 000201faa4] #3 [0036f47000 - 0037fef7a5] RAMDISK ==> [0036f47000 - 0037fef7a5] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] #5 [0002020000 - 0002020240] BRK ==> [0002020000 - 0002020240] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] Reserving 129MB of memory at 48MB for crashkernel (System RAM: 4854MB) [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0012f600 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000001 -> 0x0000009e 0: 0x00000100 -> 0x000cbfb9 0: 0x00100000 -> 0x0012f600 On node 0 totalpages: 1029462 DMA zone: 56 pages used for memmap DMA zone: 103 pages reserved DMA zone: 3838 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 817137 pages, LIFO batch:31 Normal zone: 2653 pages used for memmap Normal zone: 191395 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1808 ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 6 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000cbfb9000 - 00000000cbfba000 PM: Registered nosave memory: 00000000cbfba000 - 00000000cbfcd000 PM: Registered nosave memory: 00000000cbfcd000 - 00000000cc0b9000 PM: Registered nosave memory: 00000000cc0b9000 - 00000000cc0e9000 PM: Registered nosave memory: 00000000cc0e9000 - 00000000cfa00000 PM: Registered nosave memory: 00000000cfa00000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000 PM: Registered nosave memory: 00000000fed04000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fed80000 PM: Registered nosave memory: 00000000fed80000 - 00000000fed88000 PM: Registered nosave memory: 00000000fed88000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at cfa00000 (gap: cfa00000:28600000) Booting paravirtualized kernel on bare hardware NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u262144 pcpu-alloc: s94872 r8192 d23912 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012370 Policy zone: Normal Kernel command line: ro root=UUID=8248314f-3fc6-49d7-9151-3d94a1b7d1a0 rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M rd_NO_LVM rd_NO_DM PID hash table entries: 4096 (order: 3, 32768 bytes) xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 3825232k/4970496k available (5325k kernel code, 852648k absent, 292616k reserved, 7013k data, 1276k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:472 Console: colour VGA+ 80x25 console [tty0] enabled allocated 16777216 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 1995.529 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.05 BogoMIPS (lpj=1995529) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 7 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21769 entries in 86 pages APIC routing finalized to flat. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Celeron(R) CPU 2950M @ 2.00GHz stepping 03 Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 8 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 00000007000000ff NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 CPU1: Thermal monitoring handled by SMI Brought up 2 CPUs Total of 2 processors activated (7982.11 BogoMIPS). sizeof(vma)=200 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2648 bytes devtmpfs: initialized PM: Registering ACPI NVS region at cbfb9000 (4096 bytes) PM: Registering ACPI NVS region at cbfcd000 (966656 bytes) regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xfeafffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff] pci 0000:00:02.0: reg 10: [mem 0xe4400000-0xe47fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] pci 0000:00:03.0: reg 10: [mem 0xe4a30000-0xe4a33fff 64bit] pci 0000:00:14.0: reg 10: [mem 0xe4a20000-0xe4a2ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold pci 0000:00:14.0: PME# disabled pci 0000:00:16.0: reg 10: [mem 0xe4a38000-0xe4a3800f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:19.0: reg 10: [mem 0xe4a00000-0xe4a1ffff] pci 0000:00:19.0: reg 14: [mem 0xe4a3f000-0xe4a3ffff] pci 0000:00:19.0: reg 18: [io 0x4080-0x409f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 10: [mem 0xe4a3e000-0xe4a3e3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xe4a34000-0xe4a37fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 10: [mem 0xe4a3d000-0xe4a3d3ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x40a8-0x40af] pci 0000:00:1f.2: reg 14: [io 0x40b4-0x40b7] pci 0000:00:1f.2: reg 18: [io 0x40a0-0x40a7] pci 0000:00:1f.2: reg 1c: [io 0x40b0-0x40b3] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] pci 0000:00:1f.2: reg 24: [mem 0xe4a3c000-0xe4a3c7ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: reg 10: [mem 0xe4900000-0xe4900fff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xe4900000-0xe49fffff] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:00.0: reg 10: [mem 0xe4800000-0xe4801fff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.2: PCI bridge to [bus 02-02] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.2: bridge window [mem 0xe4800000-0xe48fffff] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: reg 10: [mem 0xe4000000-0xe4000fff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode) pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.3: bridge window [mem 0xe2000000-0xe40fffff] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe1ffffff 64bit pref] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) pci 0000:00:1c.3: bridge window [mem 0xcfa00000-0xfeafffff] (subtractive decode) pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-04] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 1f 1f pci0000:00: Requesting ACPI _OSC control (0x1d) \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1d Unable to assume _OSC PCIe control. Disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 *6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes lo: Dropping TSO features since no CSUM feature. NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 28 on node 0 alloc kstat_irqs on node 0 HPET: 8 timers in total, 5 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter hpet: hpet2 irq 24 for MSI hpet: hpet3 irq 25 for MSI Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xfed1c000-0xfed1ffff] pnp 00:01: [mem 0xfed10000-0xfed17fff] pnp 00:01: [mem 0xfed18000-0xfed18fff] pnp 00:01: [mem 0xfed19000-0xfed19fff] pnp 00:01: [mem 0xf8000000-0xfbffffff] pnp 00:01: [mem 0xfed20000-0xfed3ffff] pnp 00:01: [mem 0xfed40000-0xfed8ffff] pnp 00:01: [mem 0xfed90000-0xfed91fff] pnp 00:01: [mem 0xff000000-0xffffffff] pnp 00:01: [mem 0xfee00000-0xfeefffff] pnp 00:01: [mem 0xfed80000-0xfed83fff] pnp 00:01: [mem 0xfed84000-0xfed87fff] pnp 00:01: [mem 0xcfa11000-0xcfa11fff] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x0000-0x001f] pnp 00:02: [io 0x0081-0x0091] pnp 00:02: [io 0x0093-0x009f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: [dma 4] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [mem 0xfed00000-0xfed003ff] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) pnp 00:04: [io 0x00f0] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x002e-0x002f] pnp 00:05: [io 0x0061] pnp 00:05: [io 0x0063] pnp 00:05: [io 0x0065] pnp 00:05: [io 0x0067] pnp 00:05: [io 0x0070] pnp 00:05: [io 0x0080] pnp 00:05: [io 0x0092] pnp 00:05: [io 0x00b2-0x00b3] pnp 00:05: [io 0x2008-0x200b] pnp 00:05: [io 0xffff] pnp 00:05: [io 0xffff] pnp 00:05: [io 0x0800-0x08fe] pnp 00:05: [io 0x0900-0x09fe] pnp 00:05: [io 0x0a00-0x0afe] pnp 00:05: [io 0x0b00-0x0bfe] pnp 00:05: [io 0x1800-0x18fe] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:06: [io 0x004e-0x004f] pnp 00:06: [io 0x0680-0x06ff] pnp 00:06: [io 0x01e0-0x01e7] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: [io 0x0070-0x0077] pnp 00:07: [irq 8] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:08: [io 0x0060] pnp 00:08: [io 0x0064] pnp 00:08: [irq 1] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:09: [irq 12] pnp 00:09: Plug and Play ACPI device, IDs TTP1000 PNP0f13 (active) pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:01: [mem 0xfed40000-0xfed8ffff] could not be reserved system 00:01: [mem 0xfed90000-0xfed91fff] has been reserved system 00:01: [mem 0xff000000-0xffffffff] could not be reserved system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:01: [mem 0xfed80000-0xfed83fff] has been reserved system 00:01: [mem 0xfed84000-0xfed87fff] has been reserved system 00:01: [mem 0xcfa11000-0xcfa11fff] has been reserved system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved system 00:05: [io 0x2008-0x200b] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0800-0x08fe] has been reserved system 00:05: [io 0x0900-0x09fe] has been reserved system 00:05: [io 0x0a00-0x0afe] has been reserved system 00:05: [io 0x0b00-0x0bfe] has been reserved system 00:05: [io 0x1800-0x18fe] has been reserved system 00:06: [io 0x0680-0x06ff] has been reserved system 00:06: [io 0x01e0-0x01e7] has been reserved PCI: max bus depth: 2 pci_try_num: 3 pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io disabled] pci 0000:00:1c.0: bridge window [mem 0xe4900000-0xe49fffff] pci 0000:00:1c.0: bridge window [mem pref disabled] pci 0000:00:1c.2: PCI bridge to [bus 02-02] pci 0000:00:1c.2: PCI bridge to [bus 02-02] pci 0000:00:1c.2: bridge window [io disabled] pci 0000:00:1c.2: bridge window [mem 0xe4800000-0xe48fffff] pci 0000:00:1c.2: bridge window [mem pref disabled] pci 0000:03:00.0: BAR 15: assigned [mem 0xe8000000-0xebffffff pref] pci 0000:03:00.0: BAR 16: assigned [mem 0xec000000-0xefffffff] pci 0000:03:00.0: BAR 13: assigned [io 0x3000-0x30ff] pci 0000:03:00.0: BAR 14: assigned [io 0x3400-0x34ff] pci 0000:03:00.0: CardBus bridge to [bus 04-07] pci 0000:03:00.0: bridge window [io 0x3000-0x30ff] pci 0000:03:00.0: bridge window [io 0x3400-0x34ff] pci 0000:03:00.0: bridge window [mem 0xe8000000-0xebffffff pref] pci 0000:03:00.0: bridge window [mem 0xec000000-0xefffffff] pci 0000:00:1c.3: PCI bridge to [bus 03-04] pci 0000:00:1c.3: PCI bridge to [bus 03-04] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.3: bridge window [mem 0xe2000000-0xe40fffff] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe1ffffff 64bit pref] alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:03:00.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] pci_bus 0000:00: resource 11 [mem 0xcfa00000-0xfeafffff] pci_bus 0000:01: resource 1 [mem 0xe4900000-0xe49fffff] pci_bus 0000:02: resource 1 [mem 0xe4800000-0xe48fffff] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] pci_bus 0000:03: resource 1 [mem 0xe2000000-0xe40fffff] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe1ffffff 64bit pref] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff] pci_bus 0000:03: resource 11 [mem 0xcfa00000-0xfeafffff] pci_bus 0000:04: resource 0 [io 0x3000-0x30ff] pci_bus 0000:04: resource 1 [io 0x3400-0x34ff] pci_bus 0000:04: resource 2 [mem 0xe8000000-0xebffffff pref] pci_bus 0000:04: resource 3 [mem 0xec000000-0xefffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device UNSUPPORTED HARDWARE DEVICE: Haswell HDMI Audio ------------[ cut here ]------------ WARNING: at kernel/rh_taint.c:13 mark_hardware_unsupported+0x39/0x40() (Not tainted) Hardware name: dynabook R734 Your hardware is unsupported. Please do not report bugs, panics, oopses, etc., on this hardware. Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.32-431.el6.x86_64 #1 Call Trace: [<ffffffff81071e27>] ? warn_slowpath_common+0x87/0xc0 [<ffffffff81071ebf>] ? warn_slowpath_fmt_taint+0x3f/0x50 [<ffffffff810a4109>] ? mark_hardware_unsupported+0x39/0x40 [<ffffffff815114cd>] ? quirk_intel_haswell_HD_audio+0x15/0x17 [<ffffffff812a3ec3>] ? pci_fixup_device+0xd3/0x210 [<ffffffff81c56665>] ? pci_apply_final_quirks+0x0/0x35 [<ffffffff812a6725>] ? pci_get_subsys+0x35/0x40 [<ffffffff81c56665>] ? pci_apply_final_quirks+0x0/0x35 [<ffffffff81c5667f>] ? pci_apply_final_quirks+0x1a/0x35 [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0 [<ffffffff81c268e4>] ? kernel_init+0x29b/0x2f7 [<ffffffff8100c20a>] ? child_rip+0xa/0x20 [<ffffffff81c26649>] ? kernel_init+0x0/0x2f7 [<ffffffff8100c200>] ? child_rip+0x0/0x20 ---[ end trace e825611a859d3721 ]--- pci 0000:00:14.0: power state changed by ACPI to D0 pci 0000:00:14.0: power state changed by ACPI to D0 pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:14.0: PCI INT A disabled alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1a.0: PCI INT A disabled alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1d.0: PCI INT A disabled Trying to unpack rootfs image as initramfs... Freeing initrd memory: 17057k freed Simple Boot Flag at 0x7c set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1484128015.486:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7504 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 888FF77922D7D6E1 - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program <secalert> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 intel_idle: MWAIT substates: 0x42120 intel_idle: v0.4 model 0x3C intel_idle: lapic_timer_reliable_states 0xffffffff ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) ACPI: AC Adapter [ADP1] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000ccff4c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120518) ACPI: SSDT 00000000ccff4618 005AA (v01 PmRef ApIst 00003000 INTL 20120518) ACPI: SSDT 00000000ccff3d98 00119 (v01 PmRef ApCst 00003000 INTL 20120518) ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ01] (16 C) GHES: HEST is not enabled! ACPI Warning for \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer (20090903/nspredef-1024) ACPI: Battery Slot [BAT1] (battery present) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input3 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 21, io mem 0xe4a3e000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 23, io mem 0xe4a3d000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, 242 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver GRE over IPv4 demultiplexor driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:07: setting system clock to 2017-01-11 09:46:56 UTC (1484128016) Initalizing network drop monitor service Freeing unused kernel memory: 1276k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 800k freed Freeing unused kernel memory: 1588k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 dracut: dracut-004-335.el6 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: rd_NO_LVM: removing LVM activation device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel udev: starting version 147 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] Memory usable by graphics device = 2048M i915 0000:00:02.0: setting latency timer to 64 [drm:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100 alloc irq_desc for 29 on node -1 alloc kstat_irqs on node -1 i915 0000:00:02.0: irq 29 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up fbcon: inteldrmfb (fb0) is primary device usb 1-1: new high speed USB device number 2 using ehci_hcd usb 1-1: New USB device found, idVendor=8087, idProduct=8008 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high speed USB device number 2 using ehci_hcd usb 2-1: New USB device found, idVendor=8087, idProduct=8000 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected Refined TSC clocksource calibration: 1995.379 MHz. Switching to clocksource tsc input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5 Console: switching to colour frame buffer device 170x48 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device i915 0000:00:02.0: registered panic notifier Slow work thread pool: Starting up Slow work thread pool: Ready i915 0000:00:02.0: More than 8 outputs detected [drm:i915_write32] *ERROR* Unknown unclaimed register before writing to 4400c acpi device:01: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6 ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 dracut: Starting plymouth daemon dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [drm:i915_write32] *ERROR* Unknown unclaimed register before writing to 4400c xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 xhci_hcd 0000:00:14.0: setting latency timer to 64 xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 xhci_hcd 0000:00:14.0: cache line size of 64 is not supported alloc irq_desc for 30 on node -1 alloc kstat_irqs on node -1 xhci_hcd 0000:00:14.0: irq 30 for MSI/MSI-X usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: xHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-431.el6.x86_64 xhci_hcd usb usb3: SerialNumber: 0000:00:14.0 usb usb3: configuration #1 chosen from 1 choice xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 3-0:1.0: USB hub found hub 3-0:1.0: 14 ports detected xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: xHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-431.el6.x86_64 xhci_hcd usb usb4: SerialNumber: 0000:00:14.0 usb usb4: configuration #1 chosen from 1 choice xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 4-0:1.0: USB hub found hub 4-0:1.0: 4 ports detected ACPI: WMI: Mapper loaded input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7 yenta_cardbus 0000:03:00.0: CardBus bridge found [1179:0001] yenta_cardbus 0000:03:00.0: O2: res at 0x94/0xD4: 00/48 yenta_cardbus 0000:03:00.0: O2: enabling read prefetch/write burst yenta_cardbus 0000:03:00.0: ISA IRQ mask 0x0000, PCI irq 16 yenta_cardbus 0000:03:00.0: Socket status: 30000006 pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07 yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [mem 0xe2000000-0xe40fffff] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe1ffffff 64bit pref] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [io 0x0000-0x0cf7] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [io 0x0d00-0xffff] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [mem 0x000a0000-0x000bffff] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [mem 0x000d0000-0x000d3fff] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [mem 0x000d4000-0x000d7fff] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [mem 0x000d8000-0x000dbfff] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [mem 0x000dc000-0x000dffff] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [mem 0xcfa00000-0xfeafffff] ahci 0000:00:1f.2: version 3.0 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 31 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: irq 31 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x10 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci ata1: DUMMY ata2: DUMMY ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xe4a3c000 port 0xe4a3c300 irq 31 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ACPI _SDD failed (AE 0x5) ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ACPI _SDD failed (AE 0x5) ata5.00: ACPI: failed the second time, disabled ata5.00: ATA-8: HGST HTS725050A7E630, GH2OA420, max UDMA/133 ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata5.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA HGST HTS725050A7 GH2O PQ: 0 ANSI: 5 sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 4:0:0:0: [sda] 4096-byte physical blocks sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 > sd 4:0:0:0: [sda] Attached SCSI disk EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/sda2 dracut: Loading SELinux policy type=1404 audit(1484128025.715:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 2048 avtab hash slots, 282726 rules. SELinux: 2048 avtab hash slots, 282726 rules. SELinux: 9 users, 12 roles, 4019 types, 217 bools, 1 sens, 1024 cats SELinux: 81 classes, 282726 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda2, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1484128026.455:3): policy loaded auid=4294967295 ses=4294967295 dracut: dracut: Switching root udev: starting version 147 snd_hda_intel 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 alloc irq_desc for 32 on node -1 alloc kstat_irqs on node -1 snd_hda_intel 0000:00:03.0: irq 32 for MSI/MSI-X snd_hda_intel 0000:00:03.0: setting latency timer to 64 hda_codec: invalid CONNECT_LIST verb 5[1]:0 input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8 alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 alloc irq_desc for 33 on node -1 alloc kstat_irqs on node -1 snd_hda_intel 0000:00:1b.0: irq 33 for MSI/MSI-X snd_hda_intel 0000:00:1b.0: setting latency timer to 64 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti> PTP clock support registered e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2013 Intel Corporation. alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode alloc irq_desc for 34 on node -1 alloc kstat_irqs on node -1 e1000e 0000:00:19.0: irq 34 for MSI/MSI-X e1000e 0000:00:19.0: eth0: registered PHC clock e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) b8:6b:23:f7:9e:1c e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: resource (null) [io 0x1828-0x182f] conflicts with ACPI region PMIO [io 0x1800-0x187f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI: resource (null) [io 0x0800-0x083f] conflicts with ACPI region GPRL [io 0x800-0x83f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver lpc_ich: Resource conflict(s) found affecting gpio_ich sd 4:0:0:0: Attached scsi generic sg0 type 0 cfg80211: Calling CRDA to update world regulatory domain Intel(R) Wireless WiFi driver for Linux, in-tree: Copyright(c) 2003-2013 Intel Corporation iwlwifi 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlwifi 0000:02:00.0: setting latency timer to 64 alloc irq_desc for 35 on node -1 alloc kstat_irqs on node -1 iwlwifi 0000:02:00.0: irq 35 for MSI/MSI-X iwlwifi 0000:02:00.0: firmware: requesting iwlwifi-3160-7.ucode iwlwifi 0000:02:00.0: loaded firmware version 22.0.7.0 op_mode iwlmvm toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19 toshiba_acpi: HCI method: \_SB_.VALZ.GHCI NET: Registered protocol family 10 lo: Disabled Privacy Extensions microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x16 platform microcode: firmware: requesting intel-ucode/06-3c-03 microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x16 platform microcode: firmware: requesting intel-ucode/06-3c-03 Microcode Update Driver: v2.00 <tigran.co.uk>, Peter Oruba usb 3-4: new full speed USB device number 2 using xhci_hcd usb 3-4: New USB device found, idVendor=8087, idProduct=07dc usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-4: configuration #1 chosen from 1 choice iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164 iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S iwlwifi 0000:02:00.0: NVM section 0 read completed iwlwifi 0000:02:00.0: NVM section 1 read completed iwlwifi 0000:02:00.0: NVM section 4 read completed iwlwifi 0000:02:00.0: NVM section 5 read completed Registered led device: phy0-led Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: US cfg80211: Regulatory domain changed to country: US cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk> EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: SELinux: initialized (dev sda1, type ext4), uses xattr EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: SELinux: initialized (dev sda5, type ext4), uses xattr Adding 2097144k swap on /dev/sda3. Priority:-1 extents:1 across:2097144k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts e1000e 0000:00:19.0: irq 34 for MSI/MSI-X e1000e 0000:00:19.0: irq 34 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present 802.1Q VLAN Support v1.8 Ben Greear <greearb> All bugs added by David S. Miller <davem> cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012) bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v2.4.1 (Sep 17, 2013) netlink: 12 bytes leftover after parsing attributes. netlink: 12 bytes leftover after parsing attributes. netlink: 12 bytes leftover after parsing attributes. SELinux: initialized (dev configfs, type configfs), uses genfs_contexts Rounding down aligned max_sectors from 4294967295 to 4294967288 iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S ADDRCONF(NETDEV_UP): wlan0: link is not ready SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping TSO features since no CSUM feature. pan0: Dropping TSO6 features since no CSUM feature. Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 virbr0: Dropping TSO features since no CSUM feature. virbr0: Dropping TSO6 features since no CSUM feature. device virbr0-nic entered promiscuous mode virbr0: starting userspace STP failed, starting kernel STP ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) 8021q: adding VLAN 0 to HW filter on device virbr0 Ebtables v2.0 registered ip6_tables: (C) 2000-2006 Netfilter Core Team bmc-watchdog:2644 map pfn expected mapping type uncached-minus for ccbff000-ccc00000, got write-back bmc-watchdog:2644 map pfn expected mapping type uncached-minus for ccbff000-ccc00000, got write-back bmc-watchdog:2644 map pfn expected mapping type uncached-minus for ccbff000-ccc00000, got write-back SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs lo: Dropping TSO features since no CSUM feature. lo: Disabled Privacy Extensions SELinux: initialized (dev proc, type proc), uses genfs_contexts
Ahh, that would do it. Can you try the kernel at this errata? support.http://rhn.redhat.com/errata/RHSA-2013-1801.html For actual certification testing I will need to be verify some items but the above should resolve the taint and verifying that will help ensure we're good to go.
Hi Rob, It's great. After update to Kernel is 2.6.32-431.1.2, tainted error is disappeared. But below error happens during info test: Subtest: Kernel - Check OS kernel build, version + rpm -ql kernel-2.6.32-431.1.2.el6 Error: Kernel is 2.6.32-431.1.2 and not Red Hat Enterprise Linux Server 6.5 GA (None) Boot Parameters: ro root=UUID=8248314f-3fc6-49d7-9151-3d94a1b7d1a0 rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M rd_NO_LVM rd_NO_DM FAIL So would you please tell where can we get the formal release redhat ISO image which contains this updated kernel?
Hi, Sorry for the delay in response, can you install? I hadn't initially noticed it but your run says (None) for the 6.5 kernel GA version. This package provides the 6.5 kernel version to the test suite. ftp://partners.redhat.com/a166eabc5cf5df158922f9b06e5e7b21/hwcert/RHEL6/hwcert-client-info/1.6.5/32.el6/noarch/hwcert-client-info-1.6.5-32.el6.noarch.rpm I have not yet verified, but I am hoping this changes the error[fail] to warning[pass] when using the errata kernel. BTW, Thanks for your effort on this. With this feedback we have drafted instructions for how to certify with this combination of hardware and RHEL6 prior to an ISO image being available. These instructions should be out shortly. Also, unfortunately I'm not able to provide information about future releases in Bugzilla. Do you have a regular contact @ RH for this type of information?
Hi Rob, Thanks for your help. I installed hwcert-client-info-1.6.5-32.el6.noarch.rpm and confirmed it can make the test pass as your discription. BTW, can we use this tool package for formal RH HWcert? Also, unfortunately I'm not able to provide information about future releases in Bugzilla. Do you have a regular contact @ RH for this type of information? >>Yes, we have TAM of RH, and I will contact him about ISO image release.