Bug 128089 - lsraid unable to display RAID info.
lsraid unable to display RAID info.
Status: CLOSED WONTFIX
Product: Fedora
Classification: Fedora
Component: raidtools (Show other bugs)
2
x86_64 Linux
medium Severity medium
: ---
: ---
Assigned To: Doug Ledford
David Lawrence
:
Depends On:
Blocks:
  Show dependency treegraph
 
Reported: 2004-07-17 09:19 EDT by Sam Varshavchik
Modified: 2007-11-30 17:10 EST (History)
0 users

See Also:
Fixed In Version:
Doc Type: Bug Fix
Doc Text:
Story Points: ---
Clone Of:
Environment:
Last Closed: 2004-07-17 13:44:11 EDT
Type: ---
Regression: ---
Mount Type: ---
Documentation: ---
CRM:
Verified Versions:
Category: ---
oVirt Team: ---
RHEL 7.3 requirements from Atomic Host:
Cloudforms Team: ---


Attachments (Terms of Use)
My /proc/partitions (373 bytes, text/plain)
2004-07-17 09:21 EDT, Sam Varshavchik
no flags Details
strace -s 1024 lsraid -a /dev/md0 (6.05 KB, text/plain)
2004-07-17 09:22 EDT, Sam Varshavchik
no flags Details

  None (edit)
Description Sam Varshavchik 2004-07-17 09:19:05 EDT
Description of problem:

This is probably an x86_64-specific issue.

My RAID-1 partitions are activated and are operating normally, yet
lsraid fails to return any useful information about them.

Version-Release number of selected component (if applicable):

raidtools-1.00.3-8

How reproducible:

Always.

Steps to Reproduce:
1. lsraid -a /dev/md0

Actual results:

# lsraid -a /dev/md0
lsraid: Unable to find superblock for "/dev/sda1": Invalid argument
lsraid: Unable to find superblock for "/dev/sdb1": Invalid argument
[dev   9,   0] /dev/md0         00000000.00000000.00000000.00000000 online
[dev   ?,   ?] (unknown)        00000000.00000000.00000000.00000000
missing
[dev   ?,   ?] (unknown)        00000000.00000000.00000000.00000000
missing

Expected results:


Additional info:

The RAID partitions are activated and are operating normally:

Jul  7 21:51:22 commodore kernel: md: Autodetecting RAID arrays.
Jul  7 21:51:22 commodore kernel: md: autorun ...
Jul  7 21:51:22 commodore kernel: md: ... autorun DONE.
Jul  7 21:51:22 commodore kernel: RAMDISK: Compressed image found at
block 0
Jul  7 21:51:22 commodore kernel: VFS: Mounted root (ext2 filesystem).
Jul  7 21:51:22 commodore kernel: SCSI subsystem initialized
Jul  7 21:51:22 commodore kernel: scsi0 : Adaptec AIC79XX PCI-X SCSI
HBA DRIVER, Rev 1.3.11
Jul  7 21:51:22 commodore kernel:         <Adaptec 29320 Ultra320 SCSI
adapter>
Jul  7 21:51:22 commodore kernel:         aic7901A: Ultra320 Wide
Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
Jul  7 21:51:22 commodore kernel: 
Jul  7 21:51:22 commodore kernel: scsi1 : Adaptec AIC79XX PCI-X SCSI
HBA DRIVER, Rev 1.3.11
Jul  7 21:51:22 commodore kernel:         <Adaptec 29320 Ultra320 SCSI
adapter>
Jul  7 21:51:22 commodore kernel:         aic7901A: Ultra320 Wide
Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
Jul  7 21:51:22 commodore kernel: 
Jul  7 21:51:22 commodore kernel: (scsi1:A:0): 160.000MB/s transfers
(80.000MHz DT, 16bit)
Jul  7 21:51:22 commodore kernel: (scsi1:A:1): 160.000MB/s transfers
(80.000MHz DT, 16bit)
Jul  7 21:51:22 commodore kernel:   Vendor: SEAGATE   Model:
ST336607LW        Rev: 0007
Jul  7 21:51:22 commodore kernel:   Type:   Direct-Access            
         ANSI SCSI revision: 03
Jul  7 21:51:22 commodore kernel: scsi1:A:0:0: Tagged Queuing enabled.
 Depth 4
Jul  7 21:51:23 commodore kernel: SCSI device sda: 71687372 512-byte
hdwr sectors (36704 MB)
Jul  7 21:51:23 commodore kernel: SCSI device sda: drive cache: write back
Jul  7 21:51:23 commodore kernel:  sda: sda1 sda2 sda3
Jul  7 21:51:23 commodore kernel: Attached scsi disk sda at scsi1,
channel 0, id 0, lun 0
Jul  7 21:51:23 commodore kernel:   Vendor: SEAGATE   Model:
ST336607LW        Rev: 0007
Jul  7 21:51:23 commodore kernel:   Type:   Direct-Access            
         ANSI SCSI revision: 03
Jul  7 21:51:23 commodore kernel: scsi1:A:1:0: Tagged Queuing enabled.
 Depth 4
Jul  7 21:51:23 commodore kernel: SCSI device sdb: 71687372 512-byte
hdwr sectors (36704 MB)
Jul  7 21:51:23 commodore kernel: SCSI device sdb: drive cache: write back
Jul  7 21:51:23 commodore kernel:  sdb: sdb1 sdb2 sdb3
Jul  7 21:51:23 commodore kernel: Attached scsi disk sdb at scsi1,
channel 0, id 1, lun 0
Jul  7 21:51:23 commodore kernel: md: raid1 personality registered as nr 3
Jul  7 21:51:23 commodore kernel: md: Autodetecting RAID arrays.
Jul  7 21:51:23 commodore kernel: md: autorun ...
Jul  7 21:51:23 commodore kernel: md: considering sdb3 ...
Jul  7 21:51:23 commodore kernel: md:  adding sdb3 ...
Jul  7 21:51:23 commodore kernel: md: sdb2 has different UUID to sdb3
Jul  7 21:51:23 commodore kernel: md: sdb1 has different UUID to sdb3
Jul  7 21:51:23 commodore kernel: md:  adding sda3 ...
Jul  7 21:51:23 commodore kernel: md: sda2 has different UUID to sdb3
Jul  7 21:51:23 commodore kernel: md: sda1 has different UUID to sdb3
Jul  7 21:51:23 commodore kernel: md: created md2
Jul  7 21:51:23 commodore kernel: md: bind<sda3>
Jul  7 21:51:23 commodore kernel: md: bind<sdb3>
Jul  7 21:51:23 commodore kernel: md: running: <sdb3><sda3>
Jul  7 21:51:23 commodore kernel: raid1: raid set md2 active with 2
out of 2 mirrors
Jul  7 21:51:23 commodore kernel: md: considering sdb2 ...
Jul  7 21:51:23 commodore kernel: md:  adding sdb2 ...
Jul  7 21:51:23 commodore kernel: md: sdb1 has different UUID to sdb2
Jul  7 21:51:23 commodore kernel: md:  adding sda2 ...
Jul  7 21:51:23 commodore kernel: md: sda1 has different UUID to sdb2
Jul  7 21:51:24 commodore kernel: md: created md1
Jul  7 21:51:24 commodore kernel: md: bind<sda2>
Jul  7 21:51:24 commodore kernel: md: bind<sdb2>
Jul  7 21:51:24 commodore kernel: md: running: <sdb2><sda2>
Jul  7 21:51:24 commodore kernel: raid1: raid set md1 active with 2
out of 2 mirrors
Jul  7 21:51:24 commodore kernel: md: considering sdb1 ...
Jul  7 21:51:24 commodore kernel: md:  adding sdb1 ...
Jul  7 21:51:24 commodore kernel: md:  adding sda1 ...
Jul  7 21:51:24 commodore kernel: md: created md0
Jul  7 21:51:24 commodore kernel: md: bind<sda1>
Jul  7 21:51:24 commodore kernel: md: bind<sdb1>
Jul  7 21:51:24 commodore kernel: md: running: <sdb1><sda1>
Jul  7 21:51:24 commodore kernel: raid1: raid set md0 active with 2
out of 2 mirrors
Jul  7 21:51:24 commodore kernel: md: ... autorun DONE.
Jul  7 21:51:24 commodore kernel: md: Autodetecting RAID arrays.
Jul  7 21:51:24 commodore kernel: md: autorun ...
Jul  7 21:51:24 commodore kernel: md: ... autorun DONE.
Jul  7 21:51:24 commodore kernel: md: Autodetecting RAID arrays.
Jul  7 21:51:24 commodore kernel: md: autorun ...
Jul  7 21:51:24 commodore kernel: md: ... autorun DONE.
Comment 1 Sam Varshavchik 2004-07-17 09:21:41 EDT
Created attachment 101996 [details]
My /proc/partitions
Comment 2 Sam Varshavchik 2004-07-17 09:22:34 EDT
Created attachment 101997 [details]
strace -s 1024 lsraid -a /dev/md0
Comment 3 Doug Ledford 2004-07-17 13:44:11 EDT
raidtools is deprecated and will not even be present in our next
release.  Please use mdadm instead as it is actively maintained.  The
mdadm -E /dev/md0 or mdadm -E /dev/sdb1 commands are examples of what
you want.

Note You need to log in before you can comment on or make changes to this bug.