Description of problem: I inserted NCR53c810 scsi with scsi2 disk attached after after successful installation fc3test2 on IDE disk. But kudzu did not detect it. This device is present in both pcitable and modules.pcimap and it was always successfully detected. If I insert module sym53c8xx manually, it works ok. Record for /dev/sda appear in fstab. Version-Release number of selected component (if applicable): kudzu-1.1.89-1.i386.rpm How reproducible: always Steps to Reproduce: 1. install fc3test2 2. insert ncr 53c8xx with some device (disk or cdrom) 3. boot Actual results: kudzu find nothing during system boot or if you run it later from console. Expected results: kudzu must find it, load module, create modules.conf entry and re-run mkinitrd.
What does 'kudzu -p -b pci' say?
- class: OTHER bus: PCI detached: 0 driver: unknown desc: "Intel Corp.|82801DB/DBM (ICH4) SMBus Controller" vendorId: 8086 deviceId: 24c3 subVendorId: 8086 subDeviceId: 24c2 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1f pcifn: 3 - class: OTHER bus: PCI detached: 0 driver: i8xx_tco desc: "Intel Corp.|82801DB (ICH4) LPC Bridge" vendorId: 8086 deviceId: 24c0 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1f pcifn: 0 - class: OTHER bus: PCI detached: 0 driver: hw_random desc: "Intel Corp.|82801BA/CA/DB/EB/ER Hub interface to PCI Bridge" vendorId: 8086 deviceId: 244e subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1e pcifn: 0 - class: OTHER bus: PCI detached: 0 driver: unknown desc: "Intel Corp.|82845 845 (Brookdale) Chipset AGP Bridge" vendorId: 8086 deviceId: 1a31 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1 pcifn: 0 - class: OTHER bus: PCI detached: 0 driver: unknown desc: "Intel Corp.|82845 845 (Brookdale) Chipset Host Bridge" vendorId: 8086 deviceId: 1a30 subVendorId: 8086 subDeviceId: 1a30 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 0 pcifn: 0 - class: NETWORK bus: PCI detached: 0 device: eth0 driver: 8139too desc: "Realtek|RTL-8139/8139C/8139C+" network.hwaddr: 00:50:FC:E6:53:63 vendorId: 10ec deviceId: 8139 subVendorId: 10ec subDeviceId: 8139 pciType: 1 pcidom: 0 pcibus: 2 pcidev: 9 pcifn: 0 - class: SCSI bus: PCI detached: 0 driver: ncr53c8xx desc: "LSI Logic / Symbios Logic|53c810" vendorId: 1000 deviceId: 0001 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 2 pcidev: a pcifn: 0 - class: AUDIO bus: PCI detached: 0 driver: snd-intel8x0 desc: "Intel Corp.|82801DB (ICH4) AC'97 Audio Controller" vendorId: 8086 deviceId: 24c5 subVendorId: 15bd subDeviceId: 1001 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1f pcifn: 5 - class: VIDEO bus: PCI detached: 0 driver: disabled desc: "ATI|RV280 [Radeon 9200 SE] (Secondary)" vendorId: 1002 deviceId: 5d44 subVendorId: 1458 subDeviceId: 4019 pciType: 1 pcidom: 0 pcibus: 1 pcidev: 0 pcifn: 1 - class: VIDEO bus: PCI detached: 0 driver: Card:ATI Radeon 9200SE desc: "ATI|RV280 [Radeon 9200 SE]" vendorId: 1002 deviceId: 5964 subVendorId: 1458 subDeviceId: 4018 pciType: 1 pcidom: 0 pcibus: 1 pcidev: 0 pcifn: 0 - class: USB bus: PCI detached: 0 driver: ehci-hcd desc: "Intel Corp.|82801DB (ICH4) USB2 EHCI Controller" vendorId: 8086 deviceId: 24cd subVendorId: 15bd subDeviceId: 1008 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1d pcifn: 7 - class: USB bus: PCI detached: 0 driver: uhci-hcd desc: "Intel Corp.|82801DB (ICH4) USB UHCI #3" vendorId: 8086 deviceId: 24c7 subVendorId: 8086 subDeviceId: 24c2 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1d pcifn: 2 - class: USB bus: PCI detached: 0 driver: uhci-hcd desc: "Intel Corp.|82801DB (ICH4) USB UHCI #2" vendorId: 8086 deviceId: 24c4 subVendorId: 8086 subDeviceId: 24c2 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1d pcifn: 1 - class: USB bus: PCI detached: 0 driver: uhci-hcd desc: "Intel Corp.|82801DB (ICH4) USB UHCI #1" vendorId: 8086 deviceId: 24c2 subVendorId: 8086 subDeviceId: 24c2 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1d pcifn: 0 - class: IDE bus: PCI detached: 0 driver: unknown desc: "Intel Corp.|82801DB (ICH4) Ultra ATA 100 Storage Controller" vendorId: 8086 deviceId: 24cb subVendorId: 8086 subDeviceId: 24c2 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1f pcifn: 1
I got it it. There are no module ncr53c8xx in current kernel, must be replaced by sym53c8xx. [root@leon root]# modprobe sym53c8xx dmesg says: sym0: <810> rev 0x2 at pci 0000:02:0a.0 irq 11 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: SCSI BUS has been reset. scsi1 : sym-2.1.18j sym0:0: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 8) Vendor: IBM Model: 0664M1H !P Rev: 6 61 Type: Direct-Access ANSI SCSI revision: 02 sym0:0:0: tagged command queuing enabled, command queue depth 16. scsi(1:0:0:0): Beginning Domain Validation sym0:0: asynchronous. sym0:0: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 8) scsi(1:0:0:0): Domain Validation skipping write tests scsi(1:0:0:0): Ending Domain Validation SCSI device sda: 3933040 512-byte hdwr sectors (2014 MB) SCSI device sda: drive cache: write back sda: sda1 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0 [root@leon root]# modprobe ncr53c8xx FATAL: Module ncr53c8xx not found. [root@leon root]# grep ncr53c8xx /usr/share/hwdata/pcitable 0x1000 0x0001 "ncr53c8xx" "LSI Logic / Symbios Logic|53c810" 0x1000 0x0003 "ncr53c8xx" "LSI Logic / Symbios Logic|53c825" 0x1000 0x0004 "ncr53c8xx" "LSI Logic / Symbios Logic|53c815" All these entries are incorrect now, must be sym53c8xx
Fixed in 0.133-1.