Bug 1370 - Acer Note Light, 3c589: /sbin/ifup not found
Summary: Acer Note Light, 3c589: /sbin/ifup not found
Alias: None
Product: Red Hat Linux
Classification: Retired
Component: installer
Version: 5.2
Hardware: i386
OS: Linux
Target Milestone: ---
Assignee: David Lawrence
QA Contact:
Depends On:
TreeView+ depends on / blocked
Reported: 1999-02-28 22:51 UTC by b1002627
Modified: 2008-05-01 15:37 UTC (History)
0 users

Fixed In Version:
Doc Type: Bug Fix
Doc Text:
Clone Of:
Last Closed: 1999-03-12 22:31:16 UTC

Attachments (Terms of Use)

Description b1002627 1999-02-28 22:51:34 UTC
Trying to install 5.2 via FTP. cardmgr has problems:
High beep LOW beep! Network is not initialized proper.
Acer Note Light with 3Com 3c589, trying to install with
original install/supplemental and with newest update for
5.2. Old error, was with 5.1 too!

Virtual screen 2:

running: /bin/insmod /bin/insmod /modules/pcmcia_core.o
running: /bin/insmod /bin/insmod /modules/i82365.o
running: /bin/insmod /bin/insmod /modules/ds.o

Virtual screen 3:

cardmgr[14]: could not open /var/run/cardmgr.pid: No such
file or directory
cardmgr[14]: starting, version is 3.0.5
cardmgr[14]: watching 2 sockets
cs: IO port probe 0x1000-0x17ff: excluding 0x13f0-13f7
cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3e7
0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean
cardmgr[14]: fopen(stabfile) failed: No such file or
cardmgr[14]: initializing socket 0
cs: memory proble 0x0d0000-0x0dffff: clean.
cardmgr[14]: socket 0: 3Com 3c589 Ethernet
cardmgr[14]: executing: 'insmod
eth0: 3Com 3c589, port 0x300, irq 3, Auto port, hw_addr
cardmgr[14]: fopen(stabfile) failed: No such file or
cardmgr[14]: executing: './network start eth0'
cardmgr[14]: * ./network: /sbin/ifup: not found
cardmgr[14]: start cmd exited with status 2

Hope, this output may help

Comment 1 David Lawrence 1999-03-12 22:31:59 UTC
This sounds like a resource conflict with the network card settings
and another piece of hardware in your machine. Please contact Red Hat
technical support at http://www.redhat.com/support and they can
possible help you work this out.

------- Additional Comments From   03/13/99 09:34 -------
Nope, this note had installed a RH5.0 allready. There is no special
card bus service with this Bios. The old RH5.0 disks worked with
PCMCIA and the 3c589

------- Additional Comments From   03/21/99 06:46 -------
Ok, installed Note via PLIP. After rebooting system found my 3c589
without problems! Network works. So IMHO this is your problem ;-)

Note You need to log in before you can comment on or make changes to this bug.