In RC1, I am unable to get X to install greater than 640x480 256 colors. This failure occurs both in the graphical install and post install using Xconfigurator. All other modes than 640x480 fail on X startup or during configuration. x x x PCI probing found a: x x x x PCI Entry : Matrox|MGA 2164W [Millennium II] x x X Server : XF86_SVGA x x XFree4 driver: mga (Not used by default) x x x x lqqqqk x x x Ok x x x mqqqqj x After exiting the install and starting X the following errors are listed: XF86Config: /usr/X11R6/lib/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keycodes: "xfree86" (**) XKB: types: "default" (**) XKB: compat: "default" (**) XKB: symbols: "us(pc101)" (**) XKB: geometry: "pc" (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 5 (**) Mouse: 3 button emulation (timeout: 50ms) (**) Mouse: zaxismapping: (-)4 (+)5 (**) SVGA: Graphics device ID: "Matrox|MGA 2164W [Millennium II]" (**) SVGA: Monitor ID: "Generic High Frequency SVGA, 1024x768 @ 70 Hz" (--) SVGA: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted. (--) SVGA: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted. (--) SVGA: Mode "640x400" needs vert refresh rate of 69.93 Hz. Deleted. (--) SVGA: Mode "640x400" needs vert refresh rate of 85.08 Hz. Deleted. (--) SVGA: Mode "640x480" needs vert refresh rate of 100.02 Hz. Deleted. (--) SVGA: Mode "640x480" needs vert refresh rate of 59.94 Hz. Deleted. (--) SVGA: Mode "640x480" needs vert refresh rate of 69.98 Hz. Deleted. (--) SVGA: Mode "640x480" needs vert refresh rate of 75.00 Hz. Deleted. (--) SVGA: Mode "640x480" needs vert refresh rate of 85.01 Hz. Deleted. (--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted. (--) SVGA: Mode "800x600" needs vert refresh rate of 56.25 Hz. Deleted. (--) SVGA: Mode "800x600" needs vert refresh rate of 60.32 Hz. Deleted. (--) SVGA: Mode "800x600" needs vert refresh rate of 72.19 Hz. Deleted. (--) SVGA: Mode "800x600" needs vert refresh rate of 84.99 Hz. Deleted. (--) SVGA: Mode "1024x480" needs vert refresh rate of 92.12 Hz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) SVGA: Mode "1024x768" needs vert refresh rate of 60.00 Hz. Deleted. (--) SVGA: Mode "1024x768" needs vert refresh rate of 70.07 Hz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. ... Warning: The directory "/usr/X11R6/lib/X11/fonts/TrueType" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100" (--) SVGA: PCI: Matrox MGA 2164W rev 0, Memory @ 0xe6000000, 0xe4000000 (--) SVGA: Linear framebuffer at 0xE6000000 (--) SVGA: MMIO registers at 0xE4000000 (--) SVGA: Video BIOS info block at 0x000c7dc0 (--) SVGA: Found and verified enhanced Video BIOS info block (!!) SVGA: Unable to probe for video memory size. Assuming 4 Meg. Please s pecify the correct amount in the XF86Config file. See the file README.MGA for details. (--) SVGA: chipset: mga2164w (--) SVGA: videoram: 4096k (**) SVGA: Option "dac_8_bit" (**) SVGA: Using 16 bpp, Depth 16, Color weight: 565 (--) SVGA: Maximum allowed dot-clock: 230.000 MHz (--) SVGA: There is no mode definition named "640x480" (--) SVGA: Removing mode "640x480" from list of valid modes. (--) SVGA: There is no mode definition named "800x600" (--) SVGA: Removing mode "800x600" from list of valid modes. (--) SVGA: There is no mode definition named "1024x768" Fatal server error: No valid modes found. When reporting a problem related to a server crash, please send the full server output, not just the last messages X connection to :0.0 broken (explicit kill or server shutdown).
Did it probe your monitor as anything in particular?
Do you have this box around here somewhere?
Box is in my cube... went to find you earlier. [You were at lunch.. Erik must be letting up.. in the old days programmers were chained to a desk until release day.] The monitor was probed during the install and came up with a DAC code. During the Xconfigurator on post install it tries to probe and then goes to "Custom Monitor" list.
Somehow, only the 50 from "50-90" in VertRefresh survives...
OK - fixed. "A - B" monitor range as opposed to "A-B" didn't work. Look for 4.3.46 in the 7.0test tree.
Commit pushed to master at https://github.com/openshift/origin https://github.com/openshift/origin/commit/91d44c539fa41516fe0662ec4fd20930d20bc03b Merge pull request #16022 from jim-minter/issue16013 Automatic merge from submit-queue resolve `groups "impersonategroup" already exists` error fixes #16013