Description of problem: Monitor NEC MultiSync E233WM does not power on when connected through DisplayPort to OneLink+ dock station of laptop Lenovo X1 Carbon 4th generation. The monitor is recognized by system and present in monitors layout, but powered off. Version-Release number of selected component (if applicable): xorg-x11-drv-intel-2.99.917-28.20180530.el7.x86_64 kernel-3.10.0-948.el7.x86_64 How reproducible: always Steps to Reproduce: 1. have laptop Lenovo X1 Carbon 4th generation connected to OneLink+ dock station 2. power on the machine and proceed to graphical desktop environment 3. connect monitor NEC MultiSync E233WM to dock station via DisplayPort cable Actual results: system recognizes the monitor, but it is powered off Expected results: the monitor should be powered on and show graphics Additional info: 00:02.0 VGA compatible controller [0300]: Intel Corporation Skylake GT2 [HD Graphics 520] [8086:1916] (rev 07) Tried also to connect to mini-DP on laptop with the same result. (Also to HDMI on laptop, but there was no reaction at all, maybe hw restriction.) DVI-D output of the monitor connected to dock via DVI-to-DP cable reduction works fine.
After evaluating this issue, there are no plans to address it further or fix it in an upcoming release. Therefore, it is being closed. If plans change such that this issue will be fixed in an upcoming release, then the bug can be reopened.