Created attachment 1777160 [details] Screenshot of Pavucontrol I have 3 microphones connected on my laptop. The internal microphone which is a Cannon Point - LP High Definition Audio Controller, a Logitech C910 webcam with built in microphone and a Logitech Brio with built in Microphone. Using various applications I get a variety of behaviors usually manifested by no sound being recorded on the microphone. For instance in Bluejeans I get 4 audio devices. One called Default, one called Cannon Point, one called c910 and one called Brio. But the default and c910 ones do not record any audio. The two other work fine. In Pavucontrol I get what you see in the attached screenshot where my headphones for some reason get listed as an input device. Also there the c910 does not record any audio.
Created attachment 1777161 [details] pw-dump log
Created attachment 1777174 [details] New pw-dump log after c910 camera was disconnected and then reconnected Now audio input works from C910 after discoonect/reconnect. dmesg says this: [84514.702443] usb 1-4: USB disconnect, device number 6 [84517.872650] usb 1-4: new high-speed USB device number 7 using xhci_hcd [84518.271276] usb 1-4: New USB device found, idVendor=046d, idProduct=0821, bcdDevice= 0.10 [84518.271291] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [84518.271296] usb 1-4: SerialNumber: 9534DE90 [84518.630200] wlp0s20f3: disconnect from AP 70:3a:cb:0c:25:eb for new auth to e4:f0:42:bc:dc:40 [84518.640620] wlp0s20f3: authenticate with e4:f0:42:bc:dc:40 [84518.647230] wlp0s20f3: send auth to e4:f0:42:bc:dc:40 (try 1/3) [84518.691397] wlp0s20f3: authenticated [84518.691578] wlp0s20f3: associate with e4:f0:42:bc:dc:40 (try 1/3) [84518.703891] wlp0s20f3: RX ReassocResp from e4:f0:42:bc:dc:40 (capab=0x1011 status=0 aid=1) [84518.706410] wlp0s20f3: associated [84518.735152] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0821) [84518.771666] input: UVC Camera (046d:0821) as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/input/input28 [84518.782166] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by e4:f0:42:bc:dc:40
Created attachment 1777178 [details] PIPEWIRE_DEBUG log. This one misbehaves in bluejeans with 5 speakers duplicate speakers listed, although only 1 entry actually work
Created attachment 1777179 [details] PIPEWIRE_DEBUG log. C910 camera seems to have mute input here
Created attachment 1777841 [details] Yeti microphone set to zero on hotplug
Way to reproduce most easily: 1. Start pavucontrol and switch to input tab. 2. start connecting the microphones 1by1, and you will see they reacting as you say something in pavucontrol 3. For me, who have 4 microphones, at least one of those will show up in pavucontrol, but then not record any sound.
I have a logitech C910 - it was working until pipewire-0.3.26-4.fc34.x86_64. I know this is all OSS, however with all the restrictions and doing video calls online I am very motivated to figure out why this is broken. What can I do to help resolve this?
FEDORA-2021-bccaeb0a46 has been submitted as an update to Fedora 34. https://bodhi.fedoraproject.org/updates/FEDORA-2021-bccaeb0a46
FEDORA-2021-bccaeb0a46 has been pushed to the Fedora 34 testing repository. Soon you'll be able to install the update with the following command: `sudo dnf upgrade --enablerepo=updates-testing --advisory=FEDORA-2021-bccaeb0a46` You can provide feedback for this update here: https://bodhi.fedoraproject.org/updates/FEDORA-2021-bccaeb0a46 See also https://fedoraproject.org/wiki/QA:Updates_Testing for more information on how to test updates.
FEDORA-2021-bccaeb0a46 has been pushed to the Fedora 34 stable repository. If problem still persists, please make note of it in this bug report.