Description of problem: The card is autosensed but the drivers don't load properly. The hardware worked in previous versions of Fedora Core. I tried with various kernels .. latest one was 2.6.17.1 Version-Release number of selected component (if applicable): How reproducible: Every time Steps to Reproduce: 1. 2. 3. Actual results: during manual attempts to change driver options I set verbose=debug for the DST module and got the following after modprobe dvb_bt8xx rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 06 00 00 00 00 00 fa ] write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00) dst_error_recovery: Trying to return from previous errors. dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00) dst_error_recovery: Trying to return from previous errors. dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] write_dst: RDC 8820 RESET dst_error_bailout: Trying to bailout from previous error. rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_probe: unknown device. frontend_init: Could not find a Twinhan DST. dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem 1822/0001 Expected results: Additional info:
A new kernel update has been released (Version: 2.6.18-1.2200.fc5) based upon a new upstream kernel release. Please retest against this new kernel, as a large number of patches go into each upstream release, possibly including changes that may address this problem. This bug has been placed in NEEDINFO state. Due to the large volume of inactive bugs in bugzilla, if this bug is still in this state in two weeks time, it will be closed. Should this bug still be relevant after this period, the reporter can reopen the bug at any time. Any other users on the Cc: list of this bug can request that the bug be reopened by adding a comment to the bug. In the last few updates, some users upgrading from FC4->FC5 have reported that installing a kernel update has left their systems unbootable. If you have been affected by this problem please check you only have one version of device-mapper & lvm2 installed. See bug 207474 for further details. If this bug is a problem preventing you from installing the release this version is filed against, please see bug 169613. If this bug has been fixed, but you are now experiencing a different problem, please file a separate bug for the new problem. Thank you.
I upgraded kernel to 2.6.18-1.2200.fc5 I'm still getting: frontend_init: Could not find a Twinhan DST. kernel: dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem 1822/0001
(this is a mass-close to kernel bugs in NEEDINFO state) As indicated previously there has been no update on the progress of this bug therefore I am closing it as INSUFFICIENT_DATA. Please re-open if the issue still occurs for you and I will try to assist in its resolution. Thank you for taking the time to report the initial bug. If you believe that this bug was closed in error, please feel free to reopen this bug.