Describe the issue: - Modify the section "Configuring the iSCSI initiator for Red Hat Virtualization" Describe the task you were trying to accomplish: - As per https://access.redhat.com/solutions/3234761, The VDSM daemon auto-generates a new multipath.conf file. So any configuration which mentioned in /etc/multipath.conf will be overwritten. So need to move this configuration inside "/etc/multipath/conf.d/" directory. Also, correct the installation procedure as well. Suggestions for improvement: - Modify the changes according to the RHCS 5 block device guide. Document URL: https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/4/html/block_device_guide/the-ceph-iscsi-gateway#configuring-the-iscsi-initiator-for-rhv_block Chapter/Section Number and Title: 7.5.2. Configuring the iSCSI initiator for Red Hat Virtualization Product Version: RHCS 4. Any other versions of this document that also needs this update: RHCS 3
These two document needs to be updated properly: 1) For RHCS 4: https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/4/html/block_device_guide/the-ceph-iscsi-gateway#configuring-the-iscsi-initiator-for-rhv_block 7.5.2. Configuring the iSCSI initiator for Red Hat Virtualization 2) For RHCS 3: https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/3/html/block_device_guide/using_an_iscsi_gateway#the_iscsi_initiator_for_red_hat_virtualization 8.4.2. The iSCSI Initiator for Red Hat Virtualization For reference, use RHCS 5(which updated correctly): https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/5/html/block_device_guide/the-ceph-iscsi-gateway#configuring-the-iscsi-initiator-for-rhv_block https://access.redhat.com/solutions/3234761