I am facing an issue where on cold boots on my laptop I am not seeing the screen to prompt for my LUKS Password. I can type it in blindly and after pressing Enter, start to see the splash screen and then my computer boots. If I restart my PC, the password screen shows normally though. I believe this may be an issue with the i915 module (which I made sure is included in my initramfs file). When I disable KMS, I get a password prompt but the resolution looks like 800x600. It also shows a black screen after logging in to my user account. Fedora 38 Kernel 6.3.12 I am using a Razer Blade 15 (2022) Intel i7-12800H processor with built-in Iris Xe Graphics (ADL GT2) Below are my logs (which are not different between a cold start and a reboot): dmesg | grep “drm|i915” [ 1.148381] ACPI: bus type drm_connector registered [ 1.179870] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 [ 1.180055] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 2.270506] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 2.286689] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.286736] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 2.287072] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 2.289948] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.19) [ 2.316509] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.5.1 [ 2.316511] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 [ 2.331724] i915 0000:00:02.0: [drm] HuC authenticated [ 2.332526] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled [ 2.332527] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled [ 2.333054] i915 0000:00:02.0: [drm] GuC RC: enabled [ 2.333771] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized [ 3.313486] i915 0000:00:02.0: [drm] Skipping intel_backlight registration [ 3.313710] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1 [ 3.324704] fbcon: i915drmfb (fb0) is primary device [ 3.324708] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 23.530092] systemd[1]: Starting modprobe - Load Kernel Module drm… [ 23.612716] audit: type=1130 audit(1689174773.936:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=‘unit=modprobe@drm comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’ [ 24.039252] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 24.044043] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [ 24.361520] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 25.635152] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 27.300656] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 Reproducible: Always Steps to Reproduce: 1. Shutdown Laptop and ensure it is not connected to its charger 2. Start booting Fedora Actual Results: Black screen at the password prompt Expected Results: Should show password prompt and at a decent resolution
Other info about my system: System: Kernel: 6.3.12-200.fc38.x86_64 arch: x86_64 bits: 64 compiler: gcc v: 2.39-9.fc38 Console: pty pts/1 Distro: Fedora release 38 (Thirty Eight) Machine: Type: Laptop System: Razer product: Blade 15 (2022) - RZ09-0421 v: 8.04 serial: Mobo: Razer model: CH580 v: 4 serial: N/A UEFI: Razer v: 2.02 date: 01/10/2023 Battery: ID-1: BAT0 charge: 75.2 Wh (96.5%) condition: 77.9/80.2 Wh (97.1%) volts: 17.6 min: 15.4 model: Razer Blade status: charging Device-1: hid-dc:2c:26:33:55:47-battery model: Keychron K2 charge: N/A status: discharging Device-2: hidpp_battery_0 model: Logitech Wireless Mouse charge: 55% (should be ignored) status: discharging CPU: Info: 14-core (6-mt/8-st) model: 12th Gen Intel Core i7-12800H bits: 64 type: MST AMCP arch: Alder Lake rev: 3 cache: L1: 1.2 MiB L2: 11.5 MiB L3: 24 MiB Speed (MHz): avg: 1922 high: 2800 min/max: 400/4700:4800:3700 cores: 1: 694 2: 2800 3: 1247 4: 2800 5: 1121 6: 2800 7: 880 8: 2800 9: 836 10: 2800 11: 879 12: 2800 13: 2800 14: 2800 15: 2800 16: 2800 17: 2800 18: 669 19: 400 20: 918 bogomips: 112127 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Graphics: Device-1: Intel Alder Lake-P Integrated Graphics vendor: Razer USA driver: i915 v: kernel arch: Gen-12.2 bus-ID: 00:02.0 Device-2: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] vendor: Razer USA driver: nvidia v: 535.54.03 arch: Ampere bus-ID: 01:00.0 Device-3: IMC Networks Integrated RGB Camera driver: uvcvideo type: USB bus-ID: 1-2:2 Device-4: Logitech C920 PRO HD Webcam driver: snd-usb-audio,uvcvideo type: USB bus-ID: 5-1.3.1:5 Display: server: X.Org v: 22.1.9 with: Xwayland v: 22.1.9 driver: X: loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa dri: iris gpu: i915,nvidia,nvidia-nvswitch resolution: 1: 2560x1440~60Hz 2: 1920x1080~60Hz API: OpenGL v: 4.6 Mesa 23.1.3 renderer: Mesa Intel Graphics (ADL GT2) direct-render: Yes Audio: Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: Razer USA driver: sof-audio-pci-intel-tgl bus-ID: 00:1f.3 Device-2: NVIDIA GA106 High Definition Audio vendor: Razer USA driver: snd_hda_intel v: kernel bus-ID: 01:00.1 Device-3: Logitech C920 PRO HD Webcam driver: snd-usb-audio,uvcvideo type: USB bus-ID: 5-1.3.1:5 Device-4: HP USB Audio driver: hid-generic,snd-usb-audio,usbhid type: USB bus-ID: 5-1.3.5:7 API: ALSA v: k6.3.12-200.fc38.x86_64 status: kernel-api Server-1: PipeWire v: 0.3.74 status: n/a (root, process) Network: Device-1: Intel Alder Lake-P PCH CNVi WiFi vendor: Rivet Networks driver: iwlwifi v: kernel bus-ID: 00:14.3 IF: wlo1 state: up mac: Device-2: Realtek RTL8153 Gigabit Ethernet Adapter driver: r8152 type: USB bus-ID: 6-1.3.3:4 IF: enp9s0u1u3u3 state: down mac: Bluetooth: Device-1: Intel driver: btusb v: 0.8 type: USB bus-ID: 1-10:4 Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends Drives: Local Storage: total: 953.87 GiB used: 237.97 GiB (24.9%) ID-1: /dev/nvme0n1 model: NVMe CA6-8D1024 size: 953.87 GiB temp: 33.9 C Partition: ID-1: / size: 18.15 GiB used: 9.76 GiB (53.8%) fs: ext4 dev: /dev/dm-0 mapped: luks-740f9ae8-b98c-4891-bcbd-72ae1f109020 ID-2: /boot size: 1.8 GiB used: 300 MiB (16.3%) fs: ext4 dev: /dev/nvme0n1p10 ID-3: /boot/efi size: 96 MiB used: 76.2 MiB (79.3%) fs: vfat dev: /dev/nvme0n1p2 ID-4: /home size: 600 GiB used: 222.22 GiB (37.0%) fs: btrfs dev: /dev/nvme0n1p8 ID-5: /var size: 18.63 GiB used: 5.62 GiB (30.2%) fs: btrfs dev: /dev/nvme0n1p12 Swap: ID-1: swap-1 type: partition size: 3.73 GiB used: 0 KiB (0.0%) dev: /dev/nvme0n1p16 ID-2: swap-2 type: zram size: 8 GiB used: 0 KiB (0.0%) dev: /dev/zram0 Sensors: System Temperatures: cpu: 37.0 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 624 Uptime: 15m Memory: available: 15.29 GiB used: 3.44 GiB (22.5%) Init: systemd target: graphical (5) Compilers: gcc: 13.1.1 Packages: 3 note: see --rpm Shell: Bash v: 5.2.15 inxi: 3.3.27
Fedora Linux 38 entered end-of-life (EOL) status on 2024-05-21. Fedora Linux 38 is no longer maintained, which means that it will not receive any further security or bug fix updates. As a result we are closing this bug. If you can reproduce this bug against a currently maintained version of Fedora Linux please feel free to reopen this bug against that version. Note that the version field may be hidden. Click the "Show advanced fields" button if you do not see the version field. If you are unable to reopen this bug, please file a new report against an active release. Thank you for reporting this bug and we are sorry it could not be fixed.