The card in question is a dual 10/100 64bit PCI with a DEC 21154 PCI bridge. During the regular install phase I am not prompted to configure my network settings i.e the card was not detected properly. Once up and running I have no eth interfaces and running kudzu does nothing. Although kudzu seems to have taken note the card does indeed exist since I see a listing for each 3com chip and the PCI-PCI bridge in /etc/sysconfig/hwconf . The card does indeed work with linux by simply inserting the 3c59x modules. Also testing i've done with the provided bonding modules produce nice throughput numbers. Verbose and assorted output from lspci follows. Script started on Mon Jan 15 08:32:53 2001 [root@localhost netperf]# lspci -v 00:05.0 ISA bridge: Contaq Microsystems 82c693 00:05.1 IDE interface: Contaq Microsystems 82c693 00:05.2 IDE interface: Contaq Microsystems 82c693 00:05.3 USB Controller: Contaq Microsystems 82c693 00:06.0 SCSI storage controller: Adaptec AHA-2940U2/W / 7890 (rev 01) 00:07.0 VGA compatible unclassified device: 3DLabs Permedia II 2D+3D (rev 01) 00:08.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) 01:04.0 Ethernet controller: 3Com Corporation: Unknown device 9805 (rev 78) 01:05.0 Ethernet controller: 3Com Corporation: Unknown device 9805 (rev 78) [root@localhost netperf]# lspci -v 00:05.0 ISA bridge: Contaq Microsystems 82c693 Flags: bus master, medium devsel, latency 0 00:05.1 IDE interface: Contaq Microsystems 82c693 (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 0, IRQ 238 I/O ports at 01f0 I/O ports at 03f4 I/O ports at 8000 00:05.2 IDE interface: Contaq Microsystems 82c693 (prog-if 00 []) Flags: bus master, medium devsel, latency 0, IRQ 239 I/O ports at 0170 I/O ports at 0374 Memory at 0000000009000000 (32-bit, non-prefetchable) [disabled] 00:05.3 USB Controller: Contaq Microsystems 82c693 (prog-if 10 [OHCI]) Flags: bus master, medium devsel, latency 248, IRQ 234 Memory at 0000000009010000 (32-bit, non-prefetchable) 00:06.0 SCSI storage controller: Adaptec AHA-2940U2/W / 7890 (rev 01) Subsystem: Adaptec 2940U2W SCSI Controller Flags: bus master, medium devsel, latency 252, IRQ 19 BIST result: 00 I/O ports at 8800 Memory at 0000000009011000 (64-bit, non-prefetchable) Expansion ROM at 0000000002100000 [disabled] Capabilities: [dc] Power Management version 1 00:07.0 VGA compatible unclassified device: 3DLabs Permedia II 2D+3D (rev 01) Subsystem: 3DLabs: Unknown device 0123 Flags: bus master, medium devsel, latency 255, IRQ 31 Memory at 0000000009020000 (32-bit, non-prefetchable) Memory at 0000000009800000 (32-bit, non-prefetchable) Memory at 000000000a000000 (32-bit, non-prefetchable) Expansion ROM at 0000000002150000 [disabled] Capabilities: [4c] Power Management version 1 00:08.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 255 Bus: primary=00, secondary=01, subordinate=01, sec-latency=255 I/O behind bridge: 00009000-00009fff Memory behind bridge: 0a800000-0a8fffff Capabilities: [dc] Power Management version 1 01:04.0 Ethernet controller: 3Com Corporation: Unknown device 9805 (rev 78) Subsystem: 3Com Corporation: Unknown device 1201 Flags: bus master, medium devsel, latency 248, IRQ 27 I/O ports at 9000 Memory at 000000000a800000 (32-bit, non-prefetchable) Expansion ROM at 0000000002000000 [disabled] Capabilities: [dc] Power Management version 2 01:05.0 Ethernet controller: 3Com Corporation: Unknown device 9805 (rev 78) Subsystem: 3Com Corporation: Unknown device 1202 Flags: bus master, medium devsel, latency 248, IRQ 26 I/O ports at 9800 Memory at 000000000a801000 (32-bit, non-prefetchable) Expansion ROM at 0000000002020000 [disabled] Capabilities: [dc] Power Management version 2 [root@localhost netperf]# lspci -s 01:04.0 -xxx 01:04.0 Ethernet controller: 3Com Corporation: Unknown device 9805 (rev 78) 00: b7 10 05 98 07 00 10 02 78 00 00 02 10 f8 00 00 10: 01 90 00 00 00 00 80 0a 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 01 12 30: 00 00 00 02 dc 00 00 00 00 00 00 00 1b 01 0a 0a 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 00 e0: 00 41 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [root@localhost netperf]# lspci -s 01:04.0 -xxx4[1P[1@5 01:05.0 Ethernet controller: 3Com Corporation: Unknown device 9805 (rev 78) 00: b7 10 05 98 07 00 10 02 78 00 00 02 10 f8 00 00 10: 01 98 00 00 00 10 80 0a 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 02 12 30: 00 00 02 02 dc 00 00 00 00 00 00 00 1a 01 0a 0a 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 00 e0: 00 41 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [root@localhost netperf]# lspci -s 01:05.0 -xxx[1P [1@01:04.0 -xxx0:05.0 -xxx[1P[1@8 00:08.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) 00: 11 10 26 00 07 00 b0 02 05 00 04 06 10 ff 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 ff 91 91 80 22 20: 80 0a 80 0a f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 04 00 40: 0c 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 f0 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 01 00 e0: 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [root@localhost netperf]# lspci -b n 00:05.0 Class 0601: 1080:c693 00:05.1 Class 0101: 1080:c693 00:05.2 Class 0101: 1080:c693 00:05.3 Class 0c03: 1080:c693 00:06.0 Class 0100: 9005:001f (rev 01) 00:07.0 Class 0001: 3d3d:0009 (rev 01) 00:08.0 Class 0604: 1011:0026 (rev 05) 01:04.0 Class 0200: 10b7:9805 (rev 78) 01:05.0 Class 0200: 10b7:9805 (rev 78) [root@localhost netperf]# exit Script done on Mon Jan 15 08:34:51 2001
This is fixed in the current rawhide kudzu package.