Description of problem: I started Fedora 11 Beta Live CD and installed Kaffeine and xine-lib with "yum install kaffeine xine-lib". When I start Kaffeine it does not show the Digital TV (DVB) icon. Also there are no DVB items in the menu. Version-Release number of selected component (if applicable): kernel-2.6.29-0.258.2.3.rc8.git2.fc11.i586 kaffeine-0.8.7-6.fc11.i586 xine-lib-1.1.16.3-1.fc11.i586 How reproducible: Always. Steps to Reproduce: 1. Boot Fedora 11 Beta Live CD 2. yum install kaffeine xine-lib 3. Start kaffeine Actual results: No "Digital TV" icon, no DVB menu items Expected results: DVB would work. Additional info: I unplugged and re-plugged my Terratec Cinergy T2 USB DVB-T adapter. I get the following in /var/log/messages: Apr 10 17:27:04 localhost kernel: usb 1-8: new high speed USB device using ehci_hcd and address 6 Apr 10 17:27:04 localhost kernel: usb 1-8: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 Apr 10 17:27:04 localhost kernel: usb 1-8: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 Apr 10 17:27:04 localhost kernel: usb 1-8: New USB device found, idVendor=0ccd, idProduct=0038 Apr 10 17:27:04 localhost kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 10 17:27:04 localhost kernel: usb 1-8: Product: Cinergy T� Apr 10 17:27:04 localhost kernel: usb 1-8: Manufacturer: TerraTec GmbH Apr 10 17:27:04 localhost kernel: usb 1-8: configuration #1 chosen from 1 choice Apr 10 17:27:04 localhost kernel: dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state. Apr 10 17:27:04 localhost kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 10 17:27:04 localhost kernel: DVB: registering new adapter (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver) Apr 10 17:27:04 localhost kernel: DVB: registering adapter 0 frontend 0 (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver)... Apr 10 17:27:04 localhost kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0b.1/usb1/1-8/input/input12 Apr 10 17:27:04 localhost kernel: dvb-usb: schedule remote query interval to 50 msecs. Apr 10 17:27:04 localhost kernel: dvb-usb: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver successfully initialized and connected. Apr 10 17:27:04 localhost pulseaudio[3613]: module-hal-detect.c: D-Bus error while parsing HAL data: org.freedesktop.Hal.NoSuchProperty: No property info.capabilities on device with id /org/freedesktop/Hal/devices/usb_device_ccd_38_noserial Apr 10 17:27:04 localhost pulseaudio[3613]: module-hal-detect.c: D-Bus error while parsing HAL data: org.freedesktop.Hal.NoSuchProperty: No property info.capabilities on device with id /org/freedesktop/Hal/devices/usb_device_ccd_38_noserial_if0 Apr 10 17:27:06 localhost kernel: dvb-usb: recv bulk message failed: -110 Apr 10 17:27:08 localhost kernel: dvb-usb: recv bulk message failed: -110 scandvb can create channels.conf for klear. klear shows EPG and Teletext but no picture nor sound. Its output shows: $ klear mkdir: Owner of /tmp/.ICE-unix should be set to root kbuildsycoca running... Starting up Klear version 0.6.1 Current configuration-version: 19 Needed configuration-version: 19 Klear config loaded EIT vector set up Playback Engine added to GUI Starting exception protected startup Window resized to last value Loading channels list Channelsconf is:/home/liveuser/.klear//channels.conf ControllerMain: Channels list found. Reading in.... Channellist loaded AudioPid: 650 VideoPid: 512 Demux: demux0 Reading in Content Reading sector loop StreamReader thread started Packet soft CRC failed, skipping packet... Stream now established setting deinterlacing as wished via configfile QObject::connect: No such slot KSystemTray::slotQuitTray() QObject::connect: (sender name: 'CKlearUIMain') QObject::connect: (receiver name: 'Klear-Systemtray') Packet soft CRC failed, skipping packet... Packet soft CRC failed, skipping packet... Packet soft CRC failed, skipping packet... Packet soft CRC failed, skipping packet... Packet soft CRC failed, skipping packet... My versions: $ rpm -q klear dvb-apps klear-0.7.0-2.svn113.fc10.i386 dvb-apps-1.1.1-15.fc11.i586
DVB support was disabled, as there were broken kernel headers related to that for awhile. I'll try re-enabling it, and see if the situation has changed recently.
%changelog * Sun Apr 12 2009 Rex Dieter <rdieter> - 0.8.7-7 - re-enable dvb (#495379)