The standard SMP kernel included in RH6.1 fails to boot after fresh install (and after upgrade) on a dual ppro 200 HP Vectra XV. Stalls after IDE device detection but during initialization of either the IDE disk driver or the IDE CDROM driver. Using the UP kernel from the distribution corrects the problem. ------- Additional Comments From 10/18/99 13:59 ------- Identical problem on HP Vectra XU. Dual PPro 200.
I have the same problemwith same machine: HP Vectre XU dual PPro 200. Using the UP kernel from the distribution corrects the problem it ignores the second processor. What to do in order to use BOTH processors ? Thanks, Carlos Mejia carlos.fr
Alike problem with 6.1 on a Compaq PWS 5100 with two PII 300 processors. The system booted up to the NCR 53c8xx initialization, on which the SCSI bus reset timed out indefinitely. WORKAROUND: Boot the SMP kernel with the noapic option (add append="noapic" to lilo.conf).
Thanks to juanco for the "noapic" workaraund, SMP now works in my dual PPro 200 Mhz; I also had installed RH 6.1 in a HP Vectra XAs dual PII 450 and SMP works fine. No need to use "noapic".
Assigned to dledford
The identical problem occurs with the Compaq Professional Workstation 8000 (dual PPro).
The HP-Xu problem is caused by invalid BIOS tables. Nothing we can do. noapic is good For the compaq machines set the OS in the BIOS to 'Unixware' to make them run compatible to standards
Commit pushed to master at https://github.com/openshift/origin https://github.com/openshift/origin/commit/0e2876c9f96e07df5477cff2867817ee189d90d0 Merge pull request #10239 from soltysh/issue5927 Merged by openshift-bot
Commit pushed to master at https://github.com/openshift/origin https://github.com/openshift/origin/commit/8dc870cedd4846ea853dc74d176d36d4be67ca9c Merge pull request #10343 from openshift/revert-10239-issue5927 Revert "Bug 1281735 - remove the internal docker registry information from imagestream"