Description of problem: network check should be performed only for the interactive install , so that when network brought up failed , we can still get installation successfully . Then go to os to re-set others . Tried to auto install RHEVH onto iSCSI storage with following parameters , linux firstboot local_boot storage_init=scsi:360a9800050334c33424a573530657851 storage_vol=:5::5:5:-1 BOOTIF=eth0 network bring up failed ======================== Configuring network Network configured successfully Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] Bringing up interface eth2: [ OK ] Bringing up interface breth0: Determining IP information for breth0... failed. [FAILED] Configure network before registering to RHN. Automatic installation failed. Please review console messages. Press Enter to drop to emergency shell. network bring up succeeded ============================ Configuring network Network configured successfully Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] Bringing up interface eth2: [ OK ] Bringing up interface breth0: Determining IP information for breth0... done. [ OK ] installing the image. done.
Check this bug on rhev-hypervisor-5.6(4.el5), do follow steps: 1. Disconnect NIC to network 2. do auto install rhevh on local disk/USB/FC storage linux firstboot local_boot storage_init=/dev/sda storage_vol=:5::5:5:-1 BOOTIF=eth0 Then you can see eth0 obtain IP address failed, and after it, the installation can be done well. Configuring network Network configured successfully Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] Bringing up interface eth2: [ OK ] Bringing up interface breth0: Determining IP information for breth0... failed. [FAILED] installing the image. Add the ovirt.log file So change this bug's status to verified.
Created attachment 453186 [details] ovirt.log Add ovirt.log for fixed
Technical note added. If any revisions are required, please edit the "Technical Notes" field accordingly. All revisions will be proofread by the Engineering Content Services team. New Contents: Prior to this update, a failed attempt to activate a network interface caused an automatic installation of Red Hat Enterprise Virtualization Hypervisor to fail. With this update, this error no longer occurs, and the installation can now be finished successfully without a working network.
An advisory has been issued which should help the problem described in this bug report. This report is therefore being closed with a resolution of ERRATA. For more information on therefore solution and/or where to find the updated files, please follow the link below. You may reopen this bug report if the solution does not work for you. http://rhn.redhat.com/errata/RHBA-2011-0148.html