Created attachment 442692 [details] list of installed packages. Description of problem: When booting Fedora using kernel 2.6.34.6-47.fc13.x86_64, no log-in prompt appears. I am using NVIDIA video drivers so I have a text-mode colored bar appear that fills in from left to right (instead of the Fedora drop.) The bar should fill and then fade, and then the standard log-in should appear. It does not. If I switch the run-level setting in /etc/inittab from 5 to 3, I am able to boot correctly to a shell prompt. (I boot the system from a Live-USB, mount my Fedora boot drive, and edit the file.) When I boot using run-level 5 and enter verbose mode (I press F11 while the bar is filling) the system does not report [OK] when starting the "jexec" service, does not start any other services, and does not print anything else. Switching back to the previous kernel 2.6.33.8-149.fc13.x86_64 by editing /boot/grub/grub.conf so that default=1 allows me to boot my system normally. (I can only edit grub.conf when booting from my system in run-level3, not the Live_USB.) Version-Release number of selected component (if applicable): faulty: 2.6.34.6-47.fc13.x86_64 still good: 2.6.33.8-149.fc13.x86_64 How reproducible: I downloaded the new kernel in an update on 1 September 2010, and the system produced the error upon rebooting. Please see the attached list of installed packages; perhaps there is a conflict lurking in there somewhere. Steps to Reproduce: 1. install the 2.6.34.6-47.fc13.x86_64 kernel 2. ASSUMPTION: install all the other packages listed in the attachment 3. reboot Actual results: system does not allow log-in with run-level 5. Expected results: system should allow log-in through the GUI, along with all normal GUI functionality. Additional info: Please see the attached package list. I can provide more information if this would help anyone with their debugging.
Also noticed in x86
Does it also fail with the nouveau drivers instead of nvidia? Also, please try adding "pci=nocrs" to the kernel boot options. And provide the output of the "lspci -vnn" command.
Im using proprietary driver... the pci=nocrs option is to run in nouveau or nvidia drivers?
I see the failure with Intel i915 driver on x86_64 as well. I also notice that NUMLOCK led on the keyboard goes off when runlevel 5 starts. Here is lspci -v: # lspci -v 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: Giga-byte Technology Device 5000 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device d000 Flags: bus master, fast devsel, latency 0, IRQ 24 Memory at f2000000 (64-bit, non-prefetchable) [size=4M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at e400 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [a4] PCI Advanced Features Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) Subsystem: Giga-byte Technology Device d000 Flags: bus master, fast devsel, latency 0 Memory at f2400000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 2 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) Subsystem: Giga-byte Technology Device a002 Flags: bus master, fast devsel, latency 0, IRQ 25 Memory at f2500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device 5004 Flags: bus master, medium devsel, latency 0, IRQ 23 I/O ports at e000 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device 5004 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at e100 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device 5004 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at e200 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device 5004 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at e300 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device 5006 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f2504000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f0000000-f1ffffff Prefetchable memory behind bridge: 00000000f2600000-00000000f26fffff Capabilities: [50] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Giga-byte Technology Device 5001 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: leds-ss4200, iTCO_wdt, intel-rng 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Device b002 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at f000 [size=16] Capabilities: [70] Power Management version 2 Kernel driver in use: ata_piix Kernel modules: ata_generic, pata_acpi 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Subsystem: Giga-byte Technology GA-8I945PG-RH Mainboard Flags: medium devsel, IRQ 19 I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Subsystem: Giga-byte Technology GA-MA69G-S3H Motherboard Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 21 I/O ports at d000 [size=256] Memory at f1000000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at f2600000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Kernel driver in use: r8169 Kernel modules: r8169
(In reply to comment #3) > Im using proprietary driver... > We can't help you with problems with the nVidia driver because we don't have the source code for it.
This is happening only with nvidia driver?
Original poster here... I tried adding the pci=nocrs to the kernel boot options in grub.conf. I also attempted to disable the the NVIDIA drivers by performing the following actions: *removed the "rdblacklist=nouveau" from the kernel boot options *relocated the "/etc/modprobe.d/nvidia-installer-disable-nouveau.conf" file that the NVIDIA installer adds When I rebooted the machine, it still froze in the same place. The Fedora drop still did not appear. I'm not sure that I have completely disabled the NVIDIA drivers. I will continue to attempt to disable the drivers, and reboot the machine that way. As for the output of "lspci -vnn": 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11) Subsystem: Micro-Star International Co., Ltd. Device [1462:7588] Flags: fast devsel Capabilities: <access denied> 00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-fbefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11) Subsystem: Device [0062:0088] Flags: fast devsel Capabilities: <access denied> 00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11) Subsystem: Device [0062:0088] Flags: fast devsel Capabilities: <access denied> 00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11) Subsystem: Device [0062:0088] Flags: fast devsel Capabilities: <access denied> 00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11) Subsystem: Device [0062:0088] Flags: fast devsel 00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11) Subsystem: Device [0062:0088] Flags: fast devsel 00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11) Subsystem: Device [0062:0088] Flags: fast devsel 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7588] Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f7ffc000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06) Subsystem: Micro-Star International Co., Ltd. Device [1462:7588] Flags: bus master, fast devsel, latency 0, IRQ 33 Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: c0000000-c01fffff Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7588] Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f7ff6000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b02] (rev 06) Subsystem: Micro-Star International Co., Ltd. Device [1462:7588] Flags: bus master, medium devsel, latency 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller [8086:3b20] (rev 06) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7588] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at cc00 [size=8] I/O ports at c880 [size=4] I/O ports at c800 [size=8] I/O ports at c480 [size=4] I/O ports at c400 [size=16] I/O ports at c080 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_generic, pata_acpi 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) Subsystem: Micro-Star International Co., Ltd. Device [1462:7588] Flags: medium devsel, IRQ 18 Memory at f7ff4000 (64-bit, non-prefetchable) [size=256] I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller [8086:3b26] (rev 06) (prog-if 85 [Master SecO PriO]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7588] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at bc00 [size=8] I/O ports at b880 [size=4] I/O ports at b800 [size=8] I/O ports at b480 [size=4] I/O ports at b400 [size=16] I/O ports at b080 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_generic, pata_acpi 01:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 8400 GS] [10de:06e4] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ZOTAC International (MCO) Ltd. Device [19da:5044] Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at f8000000 (64-bit, non-prefetchable) [size=32M] I/O ports at dc00 [size=128] [virtual] Expansion ROM at fbee0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nouveau, nvidiafb 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) Subsystem: Micro-Star International Co., Ltd. Device [1462:7588] Flags: bus master, fast devsel, latency 0, IRQ 32 I/O ports at e800 [size=256] Memory at f6fff000 (64-bit, prefetchable) [size=4K] Memory at f6ff8000 (64-bit, prefetchable) [size=16K] Expansion ROM at fbfe0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169
Similar behaviour with Intel G41 as well. See comment #4 above. If this one is CLOSED; should I open a new bug one specific to this chipset.
still reproducible in kernel 2.6.34.6.53
I could fix it adding vmalloc=256MB in the respect kernel line on /etc/grub.conf shouldnt fedora find the right vmalloc size automatically?
This is a bug in kernel or not? Im seeing that in nvidia README file in chapter 9 (Known Issues) that is a exaustion in the mapped memory... should the kernel find the right memory?
http://us.download.nvidia.com/XFree86/Linux-x86/260.19.12/README/knownissues.html