Description of problem:
The bnx2 driver fails to load with the following message -

[root@fedora-14-r710 ~]# dmesg | grep -i bnx2
[   12.680616] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.18 (Oct 7, 2010)
[   12.681213] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[   12.681502] bnx2 0000:01:00.0: setting latency timer to 64
[   12.682141] bnx2 0000:01:00.0: pci_enable_pcie_error_reporting failed 0xfffffffb
[   12.830923] bnx2: Can't load firmware file "bnx2/bnx2-mips-09-6.0.17.fw"
[   12.831263] bnx2 0000:01:00.0: PCI INT A disabled
[   12.831614] bnx2: probe of 0000:01:00.0 failed with error -2
[   12.832099] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
[   12.832375] bnx2 0000:01:00.1: setting latency timer to 64
[   12.833126] bnx2 0000:01:00.1: pci_enable_pcie_error_reporting failed 0xfffffffb
[   13.115474] bnx2: Can't load firmware file "bnx2/bnx2-mips-09-6.0.17.fw"
[   13.115804] bnx2 0000:01:00.1: PCI INT B disabled
[   13.116652] bnx2: probe of 0000:01:00.1 failed with error -2



Version-Release number of selected component (if applicable):

[root@fedora-14-r710 ~]# cat /etc/issue
Fedora release 15 (Rawhide)
Kernel \r on an \m (\l)

[root@fedora-14-r710 ~]# uname -r
2.6.37-0.rc7.git0.1.fc15.x86_64

[root@fedora-14-r710 ~]# modinfo -F version bnx2
2.0.18


[root@fedora-14-r710 ~]# lspci | grep -i ether
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)



How reproducible:


Steps to Reproduce:
1.
2.
3.
  
Actual results:


Expected results:


Additional info: