Description of problem:  HP NC522/524 NIC card in HP DL585G7 server.  Version 4.0.539-3 HP driver.  The NIC driver appears to build under the real time kernel; yet does not appear in the kernel drivers path (this works fine under a non real time kernel)


Version-Release number of selected component (if applicable):
red hat 2.6.24.7-169.el5rt

How reproducible:
Prereqs:  server with HP NC522/524 installed

Build HP driver per steps in hp-nx_nic-4.0.539-3.src.txt

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=4268682&prodNameId=4268597&swEnvOID=4095&swLang=8&mode=2&taskId=135&swItem=MTX-a159f020681d435d820a0897df


Steps to Reproduce:
1. Build driver as outlined above
2. reboot server
3. Note that NIC driver is not loaded by doing the following command "lsmod | grep nic"
4. search for driver shows no results 
  
Actual results:

driver does not load

Expected results:

driver loads and associated ethx devices are active

Additional info:
tried earlier release of HP driver (4.0.534) too with same results.  works fine under 2.6.18-92.el5 kernel