Hide Forgot
Description of problem: When trigger a crash on intel-d3x1311-01.rhts.eng.bos.redhat.com, got these call trace from console: ==================================================================== Freeing unused kernel memory: 524k freed Write protecting the kernel text: 4260k irq 18: nobody cared (try booting with the "irqpoll" option) Pid: 1, comm: swapper Not tainted 2.6.32-119.el6.i686 #1 Call Trace: [<c24b3714>] ? __report_bad_irq+0x24/0x90 [<c24b38d0>] ? note_interrupt+0x150/0x190 [<c24b3e93>] ? handle_fasteoi_irq+0xa3/0xd0 [<c240bb82>] ? handle_irq+0x32/0x60 [<c2655500>] ? acpi_hw_read_port+0x23/0x73 [<c240b1b7>] ? do_IRQ+0x47/0xc0 [<c272394e>] ? i8042_interrupt+0x22e/0x360 [<c240a030>] ? common_interrupt+0x30/0x38 [<c24b1d05>] ? handle_IRQ_event+0x15/0x140 [<c24b37fd>] ? note_interrupt+0x7d/0x190 [<c24b5111>] ? move_native_irq+0x11/0x50 [<c24b3d68>] ? handle_edge_irq+0xa8/0x130 [<c24b3e6f>] ? handle_fasteoi_irq+0x7f/0xd0 [<c240bb82>] ? handle_irq+0x32/0x60 [<c240b1b7>] ? do_IRQ+0x47/0xc0 [<c240a030>] ? common_interrupt+0x30/0x38 [<c248007b>] ? print_name_offset+0x9b/0xd0 [<c2459d15>] ? __do_softirq+0x45/0x1b0 [<c2459ebd>] ? do_softirq+0x3d/0x50 [<c245a015>] ? irq_exit+0x65/0x70 [<c2427793>] ? smp_apic_timer_interrupt+0x53/0x90 [<c26a90a0>] ? serial8250_console_write+0x0/0x120 [<c2823255>] ? apic_timer_interrupt+0x31/0x38 [<c245379a>] ? vprintk+0x1aa/0x490 [<c24349ab>] ? change_page_attr_set_clr+0x33b/0x400 [<c24350d7>] ? set_memory_ro+0x47/0x50 [<c28203a5>] ? printk+0x17/0x22 [<c2431bdc>] ? mark_rodata_ro+0x6c/0xd0 [<c2403207>] ? init_post+0x17/0x100 [<c24031f0>] ? init_post+0x0/0x100 [<c2a5c44a>] ? kernel_init+0x22c/0x235 [<c2a5c21e>] ? kernel_init+0x0/0x235 [<c240a03f>] ? kernel_thread_helper+0x7/0x10 handlers: [<c26fc860>] (usb_hcd_irq+0x0/0x70) Disabling IRQ #18 Write protecting the kernel read-only data: 1820k Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Free memory/Total memory (free %): 100644 / 118912 ( 84.6374 ) Loading jbd2.ko module Loading mbcache.ko module Loading ext4.ko module Loading crc-t10dif.ko module Loading sd_mod.ko module Loading ata_generic.ko module Loading dm-mod.ko module device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.20.6-ioctl (2011-02-02) initialised: dm-devel Loading dm-log.ko module Loading dm-region-hash.ko module Loading dm-mirror.ko module Loading dm-zero.ko module Loading dm-snapshot.ko module Loading sunrpc.ko module RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Loading p4-clockmod.ko module p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Loading ipv6.ko module NET: Registered protocol family 10 lo: Disabled Privacy Extensions Loading parport.ko module Loading e1000.ko module e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-1-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000 0000:01:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 e1000 0000:01:01.0: eth0: (PCI:33MHz:32-bit) 00:0c:f1:7e:9b:40 e1000 0000:01:01.0: eth0: Intel(R) PRO/1000 Network Connection Loading microcode.ko module microcode: CPU0 sig=0xf33, pf=0x4, revision=0xc platform microcode: firmware: requesting intel-ucode/0f-03-03 usb 1-8: device descriptor read/64, error -71 usb 1-8: New USB device found, idVendor=10df, idProduct=0500 usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-8: Product: iAPP CR-e500 usb 1-8: Manufacturer: IN-WIN usb 1-8: SerialNumber: 006000000137 usb 1-8: configuration #1 chosen from 1 choice irq 19: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.32-119.el6.i686 #1 Call Trace: [<c24b3714>] ? __report_bad_irq+0x24/0x90 [<c24b38d0>] ? note_interrupt+0x150/0x190 [<c24b3e93>] ? handle_fasteoi_irq+0xa3/0xd0 [<c240bb82>] ? handle_irq+0x32/0x60 [<c240b1b7>] ? do_IRQ+0x47/0xc0 [<c2427793>] ? smp_apic_timer_interrupt+0x53/0x90 [<c240a030>] ? common_interrupt+0x30/0x38 [<c2410e71>] ? mwait_idle+0x61/0xc0 [<c24089a4>] ? cpu_idle+0x94/0xd0 [<c2a5c9b9>] ? start_kernel+0x3a4/0x3a9 [<c2a5c453>] ? unknown_bootoption+0x0/0x190 handlers: [<c26fc860>] (usb_hcd_irq+0x0/0x70) Disabling IRQ #19 Microcode Update Driver: v2.00 <tigran.co.uk>, Peter Oruba Loading serio_raw.ko module Loading ac97_bus.ko module Loading soundcore.ko module Loading snd-page-alloc.ko module Loading sg.ko module Loading iTCO_vendor_support.ko module iTCO_vendor_support: vendor-support=0 Loading intel-rng.ko module Intel 82802 RNG detected Loading cdrom.ko module Loading crc-itu-t.ko module Loading pata_acpi.ko module Version-Release number of selected component (if applicable): kernel-2.6.32-119.el6 kexec-tools-2.0.0-165.el6 How reproducible: Steps to Reproduce: 1.Install RHEL6.1-20110224.2 2.Update kernel/kexec-tools 3.Setup kdump 4.Trigger a crash Actual results: Got call trace Expected results: No such call trace Additional info: https://beaker.engineering.redhat.com/recipes/119022 http://beaker-archive.app.eng.bos.redhat.com/beaker-logs/2011/03/583/58398/119022///console.log
Tested with RHEL6-6.0: =============================================================== irq 18: nobody cared (try booting with the "irqpoll" option) Pid: 1, comm: swapper Not tainted 2.6.32-71.el6.i686 #1 Call Trace: [<c24aef04>] ? __report_bad_irq+0x24/0x90 [<c24af0c0>] ? note_interrupt+0x150/0x190 [<c24af683>] ? handle_fasteoi_irq+0xa3/0xd0 [<c240c192>] ? handle_irq+0x32/0x60 [<c26468b0>] ? acpi_hw_read_port+0x23/0x73 [<c240b7c7>] ? do_IRQ+0x47/0xc0 [<c2712eae>] ? i8042_interrupt+0x22e/0x360 [<c240a0f0>] ? common_interrupt+0x30/0x38 [<c24ad505>] ? handle_IRQ_event+0x15/0x140 [<c24aefed>] ? note_interrupt+0x7d/0x190 [<c24b0901>] ? move_native_irq+0x11/0x50 [<c24af558>] ? handle_edge_irq+0xa8/0x130 [<c24af65f>] ? handle_fasteoi_irq+0x7f/0xd0 [<c240c192>] ? handle_irq+0x32/0x60 [<c240b7c7>] ? do_IRQ+0x47/0xc0 [<c240a0f0>] ? common_interrupt+0x30/0x38 [<c247007b>] ? sys_timer_gettime+0x9b/0xa0 [<c2457185>] ? __do_softirq+0x45/0x1b0 [<c245732d>] ? do_softirq+0x3d/0x50 [<c2457485>] ? irq_exit+0x65/0x70 [<c2425ae4>] ? smp_apic_timer_interrupt+0x54/0x90 [<c26991e0>] ? serial8250_console_write+0x0/0x120 [<c240a435>] ? apic_timer_interrupt+0x31/0x38 [<c2450cca>] ? vprintk+0x1aa/0x490 [<c24325b4>] ? change_page_attr_set_clr+0x134/0x400 [<c2a3e000>] ? startup_xen+0x0/0x11 [<c2a3e000>] ? startup_xen+0x0/0x11 [<c2432f77>] ? set_memory_rw+0x47/0x50 [<c2a3e000>] ? startup_xen+0x0/0x11 [<c280adda>] ? printk+0x17/0x1d [<c242fd0d>] ? free_init_pages+0x5d/0xd0 [<c24031fd>] ? init_post+0xd/0x100 [<c2a3e430>] ? kernel_init+0x212/0x21b [<c2a3e21e>] ? kernel_init+0x0/0x21b [<c240a647>] ? kernel_thread_helper+0x7/0x10 handlers: [<c26ec500>] (usb_hcd_irq+0x0/0x70) Disabling IRQ #18 ...... https://beaker.engineering.redhat.com/recipes/120012
Since RHEL 6.1 External Beta has begun, and this bug remains unresolved, it has been rejected as it is not proposed as exception or blocker. Red Hat invites you to ask your support representative to propose this request, if appropriate and relevant, in the next release of Red Hat Enterprise Linux.
per comment 7, close as "CURRENTRELEASE".