Hide Forgot
Description of problem: The streamzap remote does not work. Also when buttons are pressed the ucb receiver does not light up Version-Release number of selected component (if applicable): Running kernel 2.6.38.2-9.fc15.x86_64 How reproducible: alwasy Steps to Reproduce: 1. press buttons Actual results: Nothing Expected results: reciever should light its led and the X server should respond to volume control changes. Additional info: This works under Ubuntu 10.10 and Suse 10.4, Debian Squeeze lights up but does not have X support, I use lircd. the lsmod info is: lrc_streamzap 1292 0 streamzap 5372 0 rc_core 16809 13 ir_rc5_sz_decoder,rc_streamzap,rc_hauppauge_new,cx88xx,ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,streamzap The dmesg info is: [ 2.270600] usb 3-1: Product: Streamzap Remote Control [ 2.270832] usb 3-1: Manufacturer: Streamzap, Inc. [ 12.414654] usbcore: registered new interface driver streamzap [ 12.976090] usb 3-1: Product: Streamzap Remote Control [ 12.976092] usb 3-1: Manufacturer: Streamzap, Inc. [ 13.009067] Registered IR keymap rc-streamzap [ 13.009156] input: Streamzap PC Remote Infrared Receiver (0e9c:0000) as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/rc/rc1/input6 [ 13.009209] rc1: Streamzap PC Remote Infrared Receiver (0e9c:0000) as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/rc/rc1 [ 13.009288] rc rc1: lirc_dev: driver ir-lirc-codec (streamzap) registered at minor = 1 [ 13.009294] streamzap 3-1:1.0: Registered Streamzap, Inc. Streamzap Remote Control on usb3:3 [ 13.010626] IR RC5 (streamzap) protocol handler initialized [ 13.033073] streamzap 3-1:1.0: urb terminated, status: -108 [ 13.694361] usb 3-1: Product: Streamzap Remote Control [ 13.695006] usb 3-1: Manufacturer: Streamzap, Inc. [ 13.705085] Registered IR keymap rc-streamzap [ 13.705905] input: Streamzap PC Remote Infrared Receiver (0e9c:0000) as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/rc/rc2/input7 [ 13.706792] rc2: Streamzap PC Remote Infrared Receiver (0e9c:0000) as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/rc/rc2 [ 13.707850] rc rc2: lirc_dev: driver ir-lirc-codec (streamzap) registered at minor = 1 [ 13.708785] streamzap 3-1:1.0: Registered Streamzap, Inc. Streamzap Remote Control on usb3:4 [ 13.734065] streamzap 3-1:1.0: urb terminated, status: -108 [ 13.740013] Modules linked in: sparse_keymap rfkill ir_rc5_sz_decoder rc_streamzap snd_hda_codec_hdmi snd_hda_codec_via or51132 snd_hda_intel cx88_dvb cx88_vp3054_i2c videobuf_dvb dvb_core snd_hda_codec rc_hauppauge_new tuner_simple tuner_types tda9887 tda8290 snd_hwdep snd_seq tuner snd_seq_device snd_pcm snd_timer r8169 snd shpchp cx8802 soundcore sp5100_tco snd_page_alloc serio_raw cx8800 cx88xx tveeprom v4l2_common videodev edac_core v4l2_compat_ioctl32 btcx_risc videobuf_dma_sg i2c_piix4 asus_atk0110 k10temp videobuf_core edac_mce_amd wmi ir_lirc_codec lirc_dev ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder via_rhine ir_nec_decoder streamzap mii rc_core uinput microcode ipv6 ata_generic pata_acpi pata_atiixp uas usb_storage radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded: scsi_wait_scan] The 'lsusb -v' command hangs up and can not be aborted. The lsusb info ismodprobe info is
Please update to the latest Fedora 15 updates kernel, and give that a shot. If its still a problem, yell, and I'll take a closer look. I have streamzap hardware, but it worked just fine last time I tried it out.
Sorry, I though I had already updated the bug status quite a while ago. The problem was fixed in a subsequent kernel update. This was in the bug 691108 report, where the discussion and resolution took place. My success message was at 2011-04-08 14:23:02 EDT. If I remember right, I submitted a bug report. When I was told it was closed as not being a SELINUX problem, I though I needed to resubmitted it as someting streamzap specific.
Ah yes, I remember that bug now, just didn't know it had been resolved, or that it was this same issue. :)