Hide Forgot
when test use v7-1.3 there is no exit code in test log
This is the example of the test log. Test Parameters: OUTPUTFILE=/var/log/v7/runs/1/info/output.log DEVICE= TESTSERVER=unknown RUNMODE=normal DEBUG=off UDI= Section Verify v7 - Verify the v7 installation End Section Section Kernel - Check OS kernel build, version + rpm -ql kernel-2.6.32-71.el6 Boot Parameters: ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=ja_JP.UTF-8 KEYBOARDTYPE=pc KEYTABLE=jp106 crashkernel=129M@0M rhgb End Section Section Modules - Check kernel modules checking modules... End Section Section SE Linux - Capture SE Linux status End Section Section System Report - generate system report Usage: sosreport [options] sosreport (version 2.2) This utility will collect some detailed information about the hardware and setup of your Red Hat Enterprise Linux system. The information is collected and an archive is packaged under /tmp, which you can send to a support representative. Red Hat Enterprise Linux will use this information for diagnostic purposes ONLY and it will be considered confidential information. This process may take a while to complete. No changes will be made to your system. Running plugins. Please wait ... Completed [1/49] ... Completed [2/49] ... Completed [3/49] ... Completed [4/49] ... Completed [5/49] ... Completed [6/49] ... Completed [7/49] ... Completed [8/49] ... Completed [9/49] ... Completed [10/49] ... Completed [11/49] ... Completed [12/49] ... Completed [13/49] ... Completed [14/49] ... Completed [15/49] ... Completed [16/49] ... Completed [17/49] ... Completed [18/49] ... Completed [19/49] ... Completed [20/49] ... Completed [21/49] ... Completed [22/49] ... Completed [23/49] ... Completed [24/49] ... Completed [25/49] ... Completed [26/49] ... Completed [27/49] ... Completed [28/49] ... Completed [29/49] ... Completed [30/49] ... Completed [31/49] ... Completed [32/49] ... Completed [33/49] ... Completed [34/49] ... Completed [35/49] ... Completed [36/49] ... Completed [37/49] ... Completed [38/49] ... Completed [39/49] ... Completed [40/49] ... Completed [41/49] ... Completed [42/49] ... Completed [43/49] ... Completed [44/49] ... Completed [45/49] ... Completed [46/49] ... Completed [47/49] ... Completed [48/49] ... Completed [49/49] ... Creating compressed archive... Your sosreport has been generated and saved in: /tmp/sosreport-localhost-20110410233851-5bdc.tar.xz Copied sosreport -n selinux /tmp/sosreport-localhost-20110410233851-5bdc.tar.xz to /var/log/v7/runs/1/info End Section 246077806882780166140442436884670817120
This is another example for this:(we can find "FAIL" in the end) <output> Test Parameters: OUTPUTFILE=/var/log/v7/runs/1/info/output.log DEVICE= TESTSERVER=unknown RUNMODE=normal DEBUG=off UDI= <output name="Verify v7" description="Verify the v7 installation"> <summary>PASS</summary> </output> <output name="Kernel" description="Check OS kernel build, version"> + rpm -ql kernel-2.6.32-71.el6 Boot Parameters: ro root=UUID=ca503055-733e-4de2-a288-04964e8d0f60 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=zh_CN.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet <summary>PASS</summary> </output> <output name="Modules" description="Check kernel modules"> checking modules... <summary>PASS</summary> </output> <output name="SE Linux" description="Capture SE Linux status"> <summary>PASS</summary> </output> <output name="System Report" description="generate system report"> Usage: sosreport [options] sosreport (version 2.2) This utility will collect some detailed information about the hardware and setup of your Red Hat Enterprise Linux system. The information is collected and an archive is packaged under /tmp, which you can send to a support representative. Red Hat Enterprise Linux will use this information for diagnostic purposes ONLY and it will be considered confidential information. This process may take a while to complete. No changes will be made to your system. Running plugins. Please wait ... Completed [1/51] ... Completed [2/51] ... Completed [3/51] ... Completed [4/51] ... Completed [5/51] ... Completed [6/51] ... Completed [7/51] ... Completed [8/51] ... Completed [9/51] ... Completed [10/51] ... Completed [11/51] ... Completed [12/51] ... Completed [13/51] ... Completed [14/51] ... Completed [15/51] ... Completed [16/51] ... Completed [17/51] ... Completed [18/51] ... Completed [19/51] ... Completed [20/51] ... Completed [21/51] ... Completed [22/51] ... Completed [23/51] ... Completed [24/51] ... Completed [25/51] ... Completed [26/51] ... Completed [27/51] ... Completed [28/51] ... Completed [29/51] ... Completed [30/51] ... Completed [31/51] ... Completed [32/51] ... Completed [33/51] ... Completed [34/51] ... Completed [35/51] ... Completed [36/51] ... Completed [37/51] ... Completed [38/51] ... Completed [39/51] ... Completed [40/51] ... Completed [41/51] ... Completed [42/51] ... Completed [43/51] ... Completed [44/51] ... Completed [45/51] ... Completed [46/51] ... Completed [47/51] ... Completed [48/51] ... Completed [49/51] ... Completed [50/51] ... Completed [51/51] ... Creating compressed archive... Your sosreport has been generated and saved in: /tmp/sosreport-dhcp-14-148-20110324142015-1d08.tar.xz md5sum ：fae5b4ade36b925afb87ee2c6ad21d08 <summary>FAIL</summary> </output> </output>
Created attachment 493059 [details] rundocument.py patch adding blank line at the end of log This will insure the MD5 sum is on a line by itself.
I just rerun the info test again (this time it is sucess , but still no exit code here and no detail info in SE linux section) this is the result: <output> Test Parameters: OUTPUTFILE=/var/log/v7/runs/2/info/output.log DEVICE= TESTSERVER=unknown RUNMODE=normal DEBUG=off UDI= <output name="Verify v7" description="Verify the v7 installation"> <summary>PASS</summary> </output> <output name="Kernel" description="Check OS kernel build, version"> + rpm -ql kernel-2.6.32-71.el6 Boot Parameters: ro root=UUID=ca503055-733e-4de2-a288-04964e8d0f60 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=zh_CN.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us quiet <summary>PASS</summary> </output> <output name="Modules" description="Check kernel modules"> checking modules... <summary>PASS</summary> </output> <output name="SE Linux" description="Capture SE Linux status"> <summary>PASS</summary> </output> <output name="System Report" description="generate system report"> Usage: sosreport [options] sosreport (version 2.2) This utility will collect some detailed information about the hardware and setup of your Red Hat Enterprise Linux system. The information is collected and an archive is packaged under /tmp, which you can send to a support representative. Red Hat Enterprise Linux will use this information for diagnostic purposes ONLY and it will be considered confidential information. This process may take a while to complete. No changes will be made to your system. Running plugins. Please wait ... Completed [1/51] ... Completed [2/51] ... Completed [3/51] ... Completed [4/51] ... Completed [5/51] ... Completed [6/51] ... Completed [7/51] ... Completed [8/51] ... Completed [9/51] ... Completed [10/51] ... Completed [11/51] ... Completed [12/51] ... Completed [13/51] ... Completed [14/51] ... Completed [15/51] ... Completed [16/51] ... Completed [17/51] ... Completed [18/51] ... Completed [19/51] ... Completed [20/51] ... Completed [21/51] ... Completed [22/51] ... Completed [23/51] ... Completed [24/51] ... Completed [25/51] ... Completed [26/51] ... Completed [27/51] ... Completed [28/51] ... Completed [29/51] ... Completed [30/51] ... Completed [31/51] ... Completed [32/51] ... Completed [33/51] ... Completed [34/51] ... Completed [35/51] ... Completed [36/51] ... Completed [37/51] ... Completed [38/51] ... Completed [39/51] ... Completed [40/51] ... Completed [41/51] ... Completed [42/51] ... Completed [43/51] ... Completed [44/51] ... Completed [45/51] ... Completed [46/51] ... Completed [47/51] ... Completed [48/51] ... Completed [49/51] ... Completed [50/51] ... Completed [51/51] ... Creating compressed archive... Your sosreport has been generated and saved in: /tmp/sosreport-dhcp-14-148-20110419110904-d64c.tar.xz Copied sosreport -n selinux /tmp/sosreport-dhcp-14-148-20110419110904-d64c.tar.xz to /var/log/v7/runs/2/info <summary>PASS</summary> </output> </output>
but if i change the system language to chinese it will never sucess: <output> Test Parameters: OUTPUTFILE=/var/log/v7/runs/4/info/output.log DEVICE= TESTSERVER=unknown RUNMODE=normal DEBUG=off UDI= <output name="Verify v7" description="Verify the v7 installation"> <summary>PASS</summary> </output> <output name="Kernel" description="Check OS kernel build, version"> + rpm -ql kernel-2.6.32-71.el6 Boot Parameters: ro root=UUID=ca503055-733e-4de2-a288-04964e8d0f60 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=zh_CN.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us quiet <summary>PASS</summary> </output> <output name="Modules" description="Check kernel modules"> checking modules... <summary>PASS</summary> </output> <output name="SE Linux" description="Capture SE Linux status"> <summary>PASS</summary> </output> <output name="System Report" description="generate system report"> Usage: sosreport [options] sosreport (version 2.2) This utility will collect some detailed information about the hardware and setup of your Red Hat Enterprise Linux system. The information is collected and an archive is packaged under /tmp, which you can send to a support representative. Red Hat Enterprise Linux will use this information for diagnostic purposes ONLY and it will be considered confidential information. This process may take a while to complete. No changes will be made to your system. 正在运行插件，请等候 ... Completed [1/51] ... Completed [2/51] ... Completed [3/51] ... Completed [4/51] ... Completed [5/51] ... Completed [6/51] ... Completed [7/51] ... Completed [8/51] ... Completed [9/51] ... Completed [10/51] ... Completed [11/51] ... Completed [12/51] ... Completed [13/51] ... Completed [14/51] ... Completed [15/51] ... Completed [16/51] ... Completed [17/51] ... Completed [18/51] ... Completed [19/51] ... Completed [20/51] ... Completed [21/51] ... Completed [22/51] ... Completed [23/51] ... Completed [24/51] ... Completed [25/51] ... Completed [26/51] ... Completed [27/51] ... Completed [28/51] ... Completed [29/51] ... Completed [30/51] ... Completed [31/51] ... Completed [32/51] ... Completed [33/51] ... Completed [34/51] ... Completed [35/51] ... Completed [36/51] ... Completed [37/51] ... Completed [38/51] ... Completed [39/51] ... Completed [40/51] ... Completed [41/51] ... Completed [42/51] ... Completed [43/51] ... Completed [44/51] ... Completed [45/51] ... Completed [46/51] ... Completed [47/51] ... Completed [48/51] ... Completed [49/51] ... Completed [50/51] ... Completed [51/51] ... 生成压缩归档...... 已经为您生成 sosreport 并保存在： /tmp/sosreport-dhcp-14-148-20110419112140-59ea.tar.xz md5sum 值为：2c0bf5b61717e5cff74d5be714dd59ea 请将此文件发送给您的支持代表。 <summary>FAIL</summary> </output> </output>
And please forget the comment 8.
(In reply to comment #14) > but if i change the system language to chinese it will never sucess: > We require en_us locale for certification.
(In reply to comment #16) > (In reply to comment #14) > > but if i change the system language to chinese it will never sucess: > > > > We require en_us locale for certification. Is that mentioned in policy?
(In reply to comment #16) > (In reply to comment #14) > > but if i change the system language to chinese it will never sucess: > > > > We require en_us locale for certification. So you mean the wrong locale cause the fail ? or just a bug of v7.
oh and if i upload the comment 13 result to catalog,the catalog also show it is failed
An advisory has been issued which should help the problem described in this bug report. This report is therefore being closed with a resolution of ERRATA. For more information on therefore solution and/or where to find the updated files, please follow the link below. You may reopen this bug report if the solution does not work for you. http://rhn.redhat.com/errata/RHBA-2011-0497.html