For RHEL 5.7, include all RHEL 5 supported fence devices in the tables of fence device parameters in the Cluster Administration document, as per this exchange with Lon Hohberger:

On Thu, May 12, 2011 at 04:12:20PM -0400, Perry Myers wrote:
> > Adding Lon
> > 
> > On 05/12/2011 04:10 PM, Steven Levine wrote:
>> > > Marek:
>> > > 
>> > > For the RHEL 5.7 cluster documentation, I am looking at the tables of
>> > > fence device parameters we provide in the Cluster Administration
>> > > document and comparing what we document with the fence support matrix here:
>> > > 
>> > > https://access.redhat.com/kb/docs/DOC-30003
>> > > 
>> > > I have some questions:
>> > > 
>> > > - The fence support matrix shows that apc_snmp, cisco_mds, and ilo_mp
>> > > are supported in RHEL 5. For what RHEL 5 release was support first
>> > > provided for these fence devices?  (The document is for all RHEL 5
>> > > releases, so when support is added I call that out as being supported
>> > > for "RHEL 5.x and later".)
apc_snmp as of 5.2

cisco_mds as of 5.4

ilo_mp as of 5.5

>> > > - The fence support matrix shows support for rps10 in RHEL 5. I do not
>> > > currently document that. I also can't find a man page in my RHEL 5.7
>> > > test system for a fence_rps* man page. Should I add this to the tables
>> > > of fence devices?  If so, what is the name of the fence agent and where
>> > > could I find documentation for the parameters?
Don't bother; it has not been supported by WTI for years.  We don't have
anybody using it on RHEL5 or later.  I think adding it to RHEL5
documentation is a waste of your efforts.


>> > > - The fence support matrix indicates that rehvm is not supported yet. I
>> > > do currently document it, though. Should I remove that documentation?
>> > > The man page is part of RHEL 5.7.
Interestingly enough, this is the one place where we have a QE-stamped
(Brandon P.) feature that is not supported due to the OTHER product
(RHEVM) not being stable at this time. :o


>> > > - The fence support matrix indicates that ifmib is not supported for
>> > > RHEL 5. It is currently documented in the RHEL 5 manual, however. Was
>> > > this previously supported?  Should I remove that table?
Cisco was supposed to perform QE and provide feedback for fence_ifmib
for 5.6, but it appears they never did. :/

See:
  https://bugzilla.redhat.com/show_bug.cgi?id=572863

-- Lon Hohberger - Red Hat, Inc.