Hide Forgot
Description of problem: My Nexus S's memory is no longer mounted when I plug it in my F15 system (this works fine on F14). Version-Release number of selected component (if applicable): 2.6.38.6-27.fc15.x86_64 How reproducible: always Steps to Reproduce: 1. plug USB cable to phone 2. plug USB cable to computer 3. wait for phone's memory to be mounted somewhere in /media Actual results: Memory is never mounted Expected results: Memory is mounted Additional info: Here's the contents of /var/log/messages on plugging in the phone: May 24 09:38:47 munshine kernel: [89110.837127] usb 1-1.4: new high speed USB device using ehci_hcd and address 7 May 24 09:38:47 munshine kernel: [89110.942238] usb 1-1.4: unable to read config index 0 descriptor/start: -71 May 24 09:38:47 munshine kernel: [89110.942244] usb 1-1.4: chopping to 0 config(s) May 24 09:38:47 munshine kernel: [89110.950609] usb 1-1.4: string descriptor 0 read error: -71 May 24 09:38:47 munshine kernel: [89110.950618] usb 1-1.4: New USB device found, idVendor=18d1, idProduct=4e21 May 24 09:38:47 munshine kernel: [89110.950622] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 May 24 09:38:47 munshine kernel: [89110.950817] usb 1-1.4: no configuration chosen from 0 choices May 24 09:38:47 munshine mtp-probe: checking bus 1, device 7: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4" May 24 09:38:47 munshine mtp-probe: bus: 1, device: 7 was not an MTP device
What kind of computer are you using to run Linux? Please post the output of the command "lspci -nn".
Note: upstream bug 21182 had similar symptoms. Also please try the latest update kernel, based on 2.7.38.8
(In reply to comment #1) > What kind of computer are you using to run Linux? Please post the output of the > command "lspci -nn". This is a standard Pentium D workstation. It's at least 3 years old. Output of "lspci -nn": 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01) 02:00.0 Ethernet controller [0200]: Atheros Communications L2 Fast Ethernet [1969:2048] (rev a0) (In reply to comment #2) > Note: upstream bug 21182 had similar symptoms. Also please try the latest > update kernel, based on 2.7.38.8 I'm running 2.6.38.8-32.fc15.x86_64 and still get the same error message.
Interestingly enough, changing usb cables worked. Closing