Hide Forgot
Created attachment 504515 [details] Screenshot of popup and gnome-disk-utility Description of problem: Version-Release number of selected component (if applicable): 3.0.0-2.fc15.x86_64 How reproducible: not sure Steps to Reproduce: 1. one way to reproduce it is to plug in your phone to charge that seems to bring it up. 2. 3. Actual results: annoying pop up constantly Expected results: not to be annoyed with false positive popup Additional info: OUTPUT FROM SMARTCTL: [root@Cardinal three]# smartctl -a /dev/sda smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Travelstar 5K500.B Device Model: Hitachi HTS545050B9A300 Serial Number: 110222PBN475M7FJZARE Firmware Version: PB4OCA1G User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Mon Jun 13 14:02:00 2011 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 246) Self-test routine in progress... 60% of test remaining. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 158) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0025 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0023 136 100 033 Pre-fail Always - 2 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 319 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 21 (0, 3) 7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 544 10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 297 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 4294901767 188 Command_Timeout 0x0032 089 084 000 Old_age Always - 30066147420 190 Airflow_Temperature_Cel 0x0022 059 050 045 Old_age Always - 41 (Min/Max 23/41) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3080239 193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 36664 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 3 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0 223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 544 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. [root@Cardinal three]#
This message is a notice that Fedora 15 is now at end of life. Fedora has stopped maintaining and issuing updates for Fedora 15. It is Fedora's policy to close all bug reports from releases that are no longer maintained. At this time, all open bugs with a Fedora 'version' of '15' have been closed as WONTFIX. (Please note: Our normal process is to give advanced warning of this occurring, but we forgot to do that. A thousand apologies.) Package Maintainer: If you wish for this bug to remain open because you plan to fix it in a currently maintained version, feel free to reopen this bug and simply change the 'version' to a later Fedora version. Bug Reporter: Thank you for reporting this issue and we are sorry that we were unable to fix it before Fedora 15 reached end of life. If you would still like to see this bug fixed and are able to reproduce it against a later version of Fedora, you are encouraged to click on "Clone This Bug" (top right of this page) and open it against that version of Fedora. Although we aim to fix as many bugs as possible during every release's lifetime, sometimes those efforts are overtaken by events. Often a more recent Fedora release includes newer upstream software that fixes bugs or makes them obsolete. The process we are following is described here: http://fedoraproject.org/wiki/BugZappers/HouseKeeping