Hide Forgot
Description of problem: I made xorg and mesa updates today, so now if I choose red colour it goes green, blue goes yellow etc. The colour of notification icons in empathy and skype are also broken. Here is how system monitor looks like. Attachment below. Version-Release number of selected component (if applicable): How reproducible: Steps to Reproduce: 1. 2. 3. Actual results: Expected results: Additional info:
Created attachment 514877 [details] Screenshot of system monitor colours
I don't understand what's the problem. I don't see any notifications, and the color you show on the color picker looks to me truly like #f49112 aka rgb(255,145,18). Could you elaborate and document better what's the problem, please? Thank you
Created attachment 515153 [details] Screenshot-1
Created attachment 515154 [details] Screenshot-2
You can clearly see in scrennsots above that GNOME sticker and skype icon are Orange and the bottom notification icon is Blue.
(In reply to comment #5) > You can clearly see in screenshots above that GNOME sticker and skype icon are > Orange and the bottom notification icon is Blue. Ah! Now I got it (sorry, I don't use Skype, so in the first moment it wasn't obvious). And that bottom notification icon is not the right blue either, or is it? Reassigning to mesa. Please add drm.debug=0x04 to the kernel command line, restart computer, and attach * your X server config file (/etc/X11/xorg.conf, if available), * X server log file (/var/log/Xorg.*.log) * output of the dmesg command, and * system log (/var/log/messages) to the bug report as individual uncompressed file attachments using the bugzilla file attachment link above. We will review this issue again once you've had a chance to attach this information. Thanks in advance.
Here is the output from /var/log/Xorg.0.log [ 41.457] X.Org X Server 1.10.3 Release Date: 2011-07-08 [ 41.457] X Protocol Version 11, Revision 0 [ 41.457] Build Operating System: x86-10 2.6.32-131.2.1.el6.x86_64 [ 41.457] Current Operating System: Linux localhost.localdomain 2.6.38.8-35.fc15.i686 #1 SMP Wed Jul 6 14:46:26 UTC 2011 i686 [ 41.458] Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet [ 41.458] Build Date: 11 July 2011 03:54:30PM [ 41.458] Build ID: xorg-x11-server 1.10.3-1.fc15 [ 41.458] Current version of pixman: 0.20.2 [ 41.458] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 41.458] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 41.459] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 27 10:34:58 2011 [ 41.468] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 41.468] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 41.469] (==) No Layout section. Using the first Screen section. [ 41.469] (==) No screen section available. Using defaults. [ 41.469] (**) |-->Screen "Default Screen Section" (0) [ 41.469] (**) | |-->Monitor "<default monitor>" [ 41.469] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 41.469] (==) Automatically adding devices [ 41.469] (==) Automatically enabling devices [ 41.470] (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins [ 41.470] (==) ModulePath set to "/usr/lib/xorg/modules" [ 41.470] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 41.470] (II) Loader magic: 0x8229e20 [ 41.470] (II) Module ABI versions: [ 41.470] X.Org ANSI C Emulation: 0.4 [ 41.470] X.Org Video Driver: 10.0 [ 41.470] X.Org XInput driver : 12.2 [ 41.470] X.Org Server Extension : 5.0 [ 41.473] (--) PCI:*(0:1:0:0) 10de:01d7:17aa:3839 rev 161, Mem @ 0xc9000000/16777216, 0xd0000000/268435456, 0xca000000/16777216, BIOS @ 0x????????/131072 [ 41.473] (II) LoadModule: "extmod" [ 41.486] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 41.487] (II) Module extmod: vendor="X.Org Foundation" [ 41.487] compiled for 1.10.3, module version = 1.0.0 [ 41.487] Module class: X.Org Server Extension [ 41.487] ABI class: X.Org Server Extension, version 5.0 [ 41.487] (II) Loading extension SELinux [ 41.487] (II) Loading extension MIT-SCREEN-SAVER [ 41.487] (II) Loading extension XFree86-VidModeExtension [ 41.487] (II) Loading extension XFree86-DGA [ 41.487] (II) Loading extension DPMS [ 41.487] (II) Loading extension XVideo [ 41.487] (II) Loading extension XVideo-MotionCompensation [ 41.487] (II) Loading extension X-Resource [ 41.487] (II) LoadModule: "dbe" [ 41.488] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 41.488] (II) Module dbe: vendor="X.Org Foundation" [ 41.488] compiled for 1.10.3, module version = 1.0.0 [ 41.488] Module class: X.Org Server Extension [ 41.488] ABI class: X.Org Server Extension, version 5.0 [ 41.488] (II) Loading extension DOUBLE-BUFFER [ 41.488] (II) LoadModule: "glx" [ 41.488] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 41.489] (II) Module glx: vendor="X.Org Foundation" [ 41.489] compiled for 1.10.3, module version = 1.0.0 [ 41.489] ABI class: X.Org Server Extension, version 5.0 [ 41.489] (==) AIGLX enabled [ 41.489] (II) Loading extension GLX [ 41.489] (II) LoadModule: "record" [ 41.490] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 41.490] (II) Module record: vendor="X.Org Foundation" [ 41.490] compiled for 1.10.3, module version = 1.13.0 [ 41.490] Module class: X.Org Server Extension [ 41.490] ABI class: X.Org Server Extension, version 5.0 [ 41.490] (II) Loading extension RECORD [ 41.490] (II) LoadModule: "dri" [ 41.491] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 41.491] (II) Module dri: vendor="X.Org Foundation" [ 41.491] compiled for 1.10.3, module version = 1.0.0 [ 41.491] ABI class: X.Org Server Extension, version 5.0 [ 41.491] (II) Loading extension XFree86-DRI [ 41.491] (II) LoadModule: "dri2" [ 41.491] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 41.492] (II) Module dri2: vendor="X.Org Foundation" [ 41.492] compiled for 1.10.3, module version = 1.2.0 [ 41.492] ABI class: X.Org Server Extension, version 5.0 [ 41.492] (II) Loading extension DRI2 [ 41.492] (==) Matched nouveau as autoconfigured driver 0 [ 41.492] (==) Matched vesa as autoconfigured driver 1 [ 41.492] (==) Matched fbdev as autoconfigured driver 2 [ 41.492] (==) Assigned the driver to the xf86ConfigLayout [ 41.492] (II) LoadModule: "nouveau" [ 41.492] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 41.493] (II) Module nouveau: vendor="X.Org Foundation" [ 41.493] compiled for 1.10.0, module version = 0.0.16 [ 41.493] Module class: X.Org Video Driver [ 41.493] ABI class: X.Org Video Driver, version 10.0 [ 41.493] (II) LoadModule: "vesa" [ 41.494] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 41.494] (II) Module vesa: vendor="X.Org Foundation" [ 41.494] compiled for 1.10.0, module version = 2.3.0 [ 41.494] Module class: X.Org Video Driver [ 41.494] ABI class: X.Org Video Driver, version 10.0 [ 41.494] (II) LoadModule: "fbdev" [ 41.495] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 41.495] (II) Module fbdev: vendor="X.Org Foundation" [ 41.495] compiled for 1.10.0, module version = 0.4.1 [ 41.495] ABI class: X.Org Video Driver, version 10.0 [ 41.495] (II) NOUVEAU driver [ 41.495] (II) NOUVEAU driver for NVIDIA chipset families : [ 41.495] RIVA TNT (NV04) [ 41.495] RIVA TNT2 (NV05) [ 41.495] GeForce 256 (NV10) [ 41.495] GeForce 2 (NV11, NV15) [ 41.495] GeForce 4MX (NV17, NV18) [ 41.495] GeForce 3 (NV20) [ 41.495] GeForce 4Ti (NV25, NV28) [ 41.495] GeForce FX (NV3x) [ 41.495] GeForce 6 (NV4x) [ 41.495] GeForce 7 (G7x) [ 41.496] GeForce 8 (G8x) [ 41.496] GeForce GTX 200 (NVA0) [ 41.497] GeForce GTX 400 (NVC0) [ 41.497] (II) VESA: driver for VESA chipsets: vesa [ 41.497] (II) FBDEV: driver for framebuffer: fbdev [ 41.497] (++) using VT number 1 [ 41.499] drmOpenDevice: node name is /dev/dri/card0 [ 41.500] drmOpenDevice: open result is 7, (OK) [ 41.500] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 41.500] drmOpenDevice: node name is /dev/dri/card0 [ 41.500] drmOpenDevice: open result is 7, (OK) [ 41.500] drmOpenByBusid: drmOpenMinor returns 7 [ 41.500] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 41.500] (II) [drm] nouveau interface version: 0.0.16 [ 41.500] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 41.500] (WW) Falling back to old probe method for vesa [ 41.500] (WW) Falling back to old probe method for fbdev [ 41.500] (II) Loading sub module "fbdevhw" [ 41.500] (II) LoadModule: "fbdevhw" [ 41.500] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 41.501] (II) Module fbdevhw: vendor="X.Org Foundation" [ 41.501] compiled for 1.10.3, module version = 0.0.2 [ 41.501] ABI class: X.Org Video Driver, version 10.0 [ 41.501] (II) Loading sub module "dri" [ 41.501] (II) LoadModule: "dri" [ 41.501] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 41.501] (II) Module dri: vendor="X.Org Foundation" [ 41.501] compiled for 1.10.3, module version = 1.0.0 [ 41.501] ABI class: X.Org Server Extension, version 5.0 [ 41.501] (II) NOUVEAU(0): Loaded DRI module [ 41.501] drmOpenDevice: node name is /dev/dri/card0 [ 41.501] drmOpenDevice: open result is 8, (OK) [ 41.502] drmOpenDevice: node name is /dev/dri/card0 [ 41.502] drmOpenDevice: open result is 8, (OK) [ 41.502] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 41.502] drmOpenDevice: node name is /dev/dri/card0 [ 41.502] drmOpenDevice: open result is 8, (OK) [ 41.502] drmOpenByBusid: drmOpenMinor returns 8 [ 41.502] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 41.502] (II) [drm] DRM interface version 1.4 [ 41.502] (II) [drm] DRM open master succeeded. [ 41.502] (--) NOUVEAU(0): Chipset: "NVIDIA NV46" [ 41.502] (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 41.502] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 41.502] (==) NOUVEAU(0): RGB weight 888 [ 41.502] (==) NOUVEAU(0): Default visual is TrueColor [ 41.502] (==) NOUVEAU(0): Using HW cursor [ 41.502] (==) NOUVEAU(0): GLX sync to VBlank disabled. [ 41.502] (==) NOUVEAU(0): Page flipping enabled [ 41.610] (II) NOUVEAU(0): Output LVDS-1 has no monitor section [ 41.643] (II) NOUVEAU(0): Output VGA-1 has no monitor section [ 41.669] (II) NOUVEAU(0): Output TV-1 has no monitor section [ 41.777] (II) NOUVEAU(0): EDID for output LVDS-1 [ 41.777] (II) NOUVEAU(0): Manufacturer: SEC Model: 3633 Serial#: 0 [ 41.777] (II) NOUVEAU(0): Year: 2005 Week: 0 [ 41.777] (II) NOUVEAU(0): EDID Version: 1.3 [ 41.777] (II) NOUVEAU(0): Digital Display Input [ 41.777] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21 [ 41.777] (II) NOUVEAU(0): Gamma: 2.20 [ 41.777] (II) NOUVEAU(0): No DPMS capabilities specified [ 41.777] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 41.777] (II) NOUVEAU(0): First detailed timing is preferred mode [ 41.777] (II) NOUVEAU(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 [ 41.777] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 [ 41.777] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 41.777] (II) NOUVEAU(0): Supported detailed timing: [ 41.777] (II) NOUVEAU(0): clock: 68.9 MHz Image Size: 331 x 207 mm [ 41.777] (II) NOUVEAU(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0 [ 41.777] (II) NOUVEAU(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0 [ 41.777] (II) NOUVEAU(0): Unknown vendor-specific block f [ 41.777] (II) NOUVEAU(0): SAMSUNG [ 41.777] (II) NOUVEAU(0): LTN154X3-L06 [ 41.777] (II) NOUVEAU(0): EDID (in hex): [ 41.777] (II) NOUVEAU(0): 00ffffffffffff004ca3333600000000 [ 41.777] (II) NOUVEAU(0): 000f0103802115780a87f594574f8c27 [ 41.777] (II) NOUVEAU(0): 27505400000001010101010101010101 [ 41.777] (II) NOUVEAU(0): 010101010101ee1a0080502010301030 [ 41.777] (II) NOUVEAU(0): 13004bcf100000190000000f00000000 [ 41.777] (II) NOUVEAU(0): 00000000002387026402000000fe0053 [ 41.777] (II) NOUVEAU(0): 414d53554e470a2020202020000000fe [ 41.777] (II) NOUVEAU(0): 004c544e31353458332d4c30360a0070 [ 41.777] (II) NOUVEAU(0): EDID vendor "SEC", prod id 13875 [ 41.777] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 41.777] (II) NOUVEAU(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 41.777] (II) NOUVEAU(0): Printing probed modes for output LVDS-1 [ 41.777] (II) NOUVEAU(0): Modeline "1280x800"x60.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 41.777] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 41.777] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 41.777] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz) [ 41.777] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz) [ 41.777] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz) [ 41.778] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz) [ 41.811] (II) NOUVEAU(0): EDID for output VGA-1 [ 41.837] (II) NOUVEAU(0): EDID for output TV-1 [ 41.837] (II) NOUVEAU(0): Output LVDS-1 connected [ 41.837] (II) NOUVEAU(0): Output VGA-1 disconnected [ 41.837] (II) NOUVEAU(0): Output TV-1 disconnected [ 41.837] (II) NOUVEAU(0): Using exact sizes for initial modes [ 41.837] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1280x800 +0+0 [ 41.837] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 41.837] (--) NOUVEAU(0): Virtual size is 1280x800 (pitch 0) [ 41.837] (**) NOUVEAU(0): Driver mode "1280x800": 68.9 MHz (scaled from 0.0 MHz), 49.0 kHz, 60.0 Hz [ 41.837] (II) NOUVEAU(0): Modeline "1280x800"x60.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 41.837] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz [ 41.837] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 41.837] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz [ 41.837] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 41.837] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz [ 41.837] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz) [ 41.837] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz [ 41.837] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz) [ 41.837] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz [ 41.837] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz) [ 41.837] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz [ 41.837] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz) [ 41.837] (**) NOUVEAU(0): Display dimensions: (330, 210) mm [ 41.837] (**) NOUVEAU(0): DPI set to (98, 96) [ 41.837] (II) Loading sub module "fb" [ 41.837] (II) LoadModule: "fb" [ 41.837] (II) Loading /usr/lib/xorg/modules/libfb.so [ 41.838] (II) Module fb: vendor="X.Org Foundation" [ 41.838] compiled for 1.10.3, module version = 1.0.0 [ 41.838] ABI class: X.Org ANSI C Emulation, version 0.4 [ 41.838] (II) Loading sub module "exa" [ 41.838] (II) LoadModule: "exa" [ 41.838] (II) Loading /usr/lib/xorg/modules/libexa.so [ 41.838] (II) Module exa: vendor="X.Org Foundation" [ 41.838] compiled for 1.10.3, module version = 2.5.0 [ 41.838] ABI class: X.Org Video Driver, version 10.0 [ 41.838] (II) Loading sub module "shadowfb" [ 41.838] (II) LoadModule: "shadowfb" [ 41.838] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 41.839] (II) Module shadowfb: vendor="X.Org Foundation" [ 41.839] compiled for 1.10.3, module version = 1.0.0 [ 41.839] ABI class: X.Org ANSI C Emulation, version 0.4 [ 41.839] (II) UnloadModule: "vesa" [ 41.839] (II) Unloading vesa [ 41.839] (II) UnloadModule: "fbdev" [ 41.839] (II) Unloading fbdev [ 41.839] (II) UnloadModule: "fbdevhw" [ 41.839] (II) Unloading fbdevhw [ 41.839] (--) Depth 24 pixmap format is 32 bpp [ 41.841] (II) NOUVEAU(0): Opened GPU channel 1 [ 41.842] (II) NOUVEAU(0): [DRI2] Setup complete [ 41.842] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau [ 41.842] (II) NOUVEAU(0): GART: 512MiB available [ 41.845] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer [ 41.845] (II) EXA(0): Driver allocated offscreen pixmaps [ 41.845] (II) EXA(0): Driver registered support for the following operations: [ 41.845] (II) Solid [ 41.845] (II) Copy [ 41.845] (II) Composite (RENDER acceleration) [ 41.845] (II) UploadToScreen [ 41.845] (II) DownloadFromScreen [ 41.845] (==) NOUVEAU(0): Backing store disabled [ 41.845] (==) NOUVEAU(0): Silken mouse enabled [ 41.845] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter. [ 41.845] (II) NOUVEAU(0): [XvMC] Extension initialized. [ 41.845] (==) NOUVEAU(0): DPMS enabled [ 41.845] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 41.852] (--) RandR disabled [ 41.852] (II) Initializing built-in extension Generic Event Extension [ 41.852] (II) Initializing built-in extension SHAPE [ 41.852] (II) Initializing built-in extension MIT-SHM [ 41.852] (II) Initializing built-in extension XInputExtension [ 41.852] (II) Initializing built-in extension XTEST [ 41.852] (II) Initializing built-in extension BIG-REQUESTS [ 41.852] (II) Initializing built-in extension SYNC [ 41.852] (II) Initializing built-in extension XKEYBOARD [ 41.853] (II) Initializing built-in extension XC-MISC [ 41.853] (II) Initializing built-in extension XINERAMA [ 41.853] (II) Initializing built-in extension XFIXES [ 41.853] (II) Initializing built-in extension RENDER [ 41.853] (II) Initializing built-in extension RANDR [ 41.853] (II) Initializing built-in extension COMPOSITE [ 41.853] (II) Initializing built-in extension DAMAGE [ 41.862] (II) SELinux: Disabled by boolean [ 41.889] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 41.889] (II) AIGLX: enabled GLX_INTEL_swap_event [ 41.890] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 41.890] (II) AIGLX: enabled GLX_SGI_make_current_read [ 41.890] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 41.890] (II) AIGLX: Loaded and initialized /usr/lib/dri/nouveau_dri.so [ 41.890] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 41.893] (II) NOUVEAU(0): NVEnterVT is called. [ 42.297] (II) NOUVEAU(0): Setting screen physical size to 338 x 211 [ 42.297] resize called 1280 800 [ 42.382] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 42.382] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 42.382] (**) Power Button: Applying InputClass "system-setup-keyboard" [ 42.382] (II) LoadModule: "evdev" [ 42.382] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 42.383] (II) Module evdev: vendor="X.Org Foundation" [ 42.383] compiled for 1.10.1, module version = 2.6.0 [ 42.383] Module class: X.Org XInput Driver [ 42.383] ABI class: X.Org XInput driver, version 12.2 [ 42.383] (II) Using input driver 'evdev' for 'Power Button' [ 42.383] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 42.383] (**) Power Button: always reports core events [ 42.383] (**) Power Button: Device: "/dev/input/event2" [ 42.383] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 42.383] (--) Power Button: Found keys [ 42.383] (II) Power Button: Configuring as keyboard [ 42.383] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 42.383] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 42.383] (**) Option "xkb_rules" "evdev" [ 42.383] (**) Option "xkb_model" "pc105+inet" [ 42.383] (**) Option "xkb_layout" "us" [ 42.383] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 42.413] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 42.413] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 42.413] (**) Video Bus: Applying InputClass "system-setup-keyboard" [ 42.413] (II) Using input driver 'evdev' for 'Video Bus' [ 42.413] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 42.413] (**) Video Bus: always reports core events [ 42.414] (**) Video Bus: Device: "/dev/input/event5" [ 42.414] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 42.414] (--) Video Bus: Found keys [ 42.414] (II) Video Bus: Configuring as keyboard [ 42.414] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5/event5" [ 42.414] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) [ 42.414] (**) Option "xkb_rules" "evdev" [ 42.414] (**) Option "xkb_model" "pc105+inet" [ 42.414] (**) Option "xkb_layout" "us" [ 42.414] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 42.419] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 42.419] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 42.419] (**) Power Button: Applying InputClass "system-setup-keyboard" [ 42.419] (II) Using input driver 'evdev' for 'Power Button' [ 42.419] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 42.419] (**) Power Button: always reports core events [ 42.419] (**) Power Button: Device: "/dev/input/event1" [ 42.419] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 42.419] (--) Power Button: Found keys [ 42.419] (II) Power Button: Configuring as keyboard [ 42.419] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 42.419] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 42.419] (**) Option "xkb_rules" "evdev" [ 42.419] (**) Option "xkb_model" "pc105+inet" [ 42.419] (**) Option "xkb_layout" "us" [ 42.419] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 42.420] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 42.420] (II) No input driver/identifier specified (ignoring) [ 42.430] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 42.430] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 42.430] (**) AT Translated Set 2 keyboard: Applying InputClass "system-setup-keyboard" [ 42.430] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 42.430] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 42.430] (**) AT Translated Set 2 keyboard: always reports core events [ 42.430] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 42.431] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 42.431] (--) AT Translated Set 2 keyboard: Found keys [ 42.431] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 42.431] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 42.431] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 42.431] (**) Option "xkb_rules" "evdev" [ 42.431] (**) Option "xkb_model" "pc105+inet" [ 42.431] (**) Option "xkb_layout" "us" [ 42.431] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 42.431] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4) [ 42.431] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 42.431] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 42.431] (II) LoadModule: "synaptics" [ 42.432] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 42.432] (II) Module synaptics: vendor="X.Org Foundation" [ 42.432] compiled for 1.10.0, module version = 1.4.0 [ 42.432] Module class: X.Org XInput Driver [ 42.432] ABI class: X.Org XInput driver, version 12.2 [ 42.432] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 42.432] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 42.432] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 42.432] (**) Option "Device" "/dev/input/event4" [ 42.432] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 [ 42.432] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 [ 42.432] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 42.432] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 42.432] (--) SynPS/2 Synaptics TouchPad: buttons: left right [ 42.432] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 42.432] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 42.432] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4" [ 42.432] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) [ 42.432] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 42.433] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 42.433] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040 [ 42.433] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 42.433] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 42.433] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 42.433] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 42.433] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 42.433] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 42.433] (II) No input driver/identifier specified (ignoring) [ 42.565] (II) NOUVEAU(0): EDID vendor "SEC", prod id 13875 [ 42.565] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 42.566] (II) NOUVEAU(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 45.506] (II) NOUVEAU(0): EDID vendor "SEC", prod id 13875 [ 45.514] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 45.514] (II) NOUVEAU(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 45.865] (II) NOUVEAU(0): EDID vendor "SEC", prod id 13875 [ 45.865] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 45.865] (II) NOUVEAU(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 46.218] (II) NOUVEAU(0): EDID vendor "SEC", prod id 13875 [ 46.218] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 46.218] (II) NOUVEAU(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 46.481] resize called 1280 800
And dmesg output: [ 1.162570] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.174471] ata1.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, ED01, max UDMA/33 [ 1.174695] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc304000 [ 1.184018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.184062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.184066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.184068] usb usb1: Product: EHCI Host Controller [ 1.184071] usb usb1: Manufacturer: Linux 2.6.38.8-35.fc15.i686 ehci_hcd [ 1.184073] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.184198] hub 1-0:1.0: USB hub found [ 1.184203] hub 1-0:1.0: 4 ports detected [ 1.184305] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.184321] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.184325] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.184381] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.184418] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.188296] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.188313] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc304400 [ 1.197251] ata1.00: configured for UDMA/33 [ 1.198018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.198035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.198038] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.198040] usb usb2: Product: EHCI Host Controller [ 1.198043] usb usb2: Manufacturer: Linux 2.6.38.8-35.fc15.i686 ehci_hcd [ 1.198045] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.198163] hub 2-0:1.0: USB hub found [ 1.198167] hub 2-0:1.0: 6 ports detected [ 1.198264] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.198280] uhci_hcd: USB Universal Host Controller Interface driver [ 1.198320] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.198330] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.198334] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.198385] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.198427] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 1.198467] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.198470] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.198473] usb usb3: Product: UHCI Host Controller [ 1.198475] usb usb3: Manufacturer: Linux 2.6.38.8-35.fc15.i686 uhci_hcd [ 1.198477] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.198591] hub 3-0:1.0: USB hub found [ 1.198596] hub 3-0:1.0: 2 ports detected [ 1.198681] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.198688] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.198693] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.198741] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.198781] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 1.198820] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.198823] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.198826] usb usb4: Product: UHCI Host Controller [ 1.198828] usb usb4: Manufacturer: Linux 2.6.38.8-35.fc15.i686 uhci_hcd [ 1.198831] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.198949] hub 4-0:1.0: USB hub found [ 1.198953] hub 4-0:1.0: 2 ports detected [ 1.199048] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.199056] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.199060] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.199107] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.199139] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 1.199177] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.199180] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.199183] usb usb5: Product: UHCI Host Controller [ 1.199185] usb usb5: Manufacturer: Linux 2.6.38.8-35.fc15.i686 uhci_hcd [ 1.199188] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.199296] hub 5-0:1.0: USB hub found [ 1.199300] hub 5-0:1.0: 2 ports detected [ 1.199380] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.199388] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.199392] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.199443] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.199474] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 1.199692] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.199695] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.199698] usb usb6: Product: UHCI Host Controller [ 1.199700] usb usb6: Manufacturer: Linux 2.6.38.8-35.fc15.i686 uhci_hcd [ 1.199703] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.199817] hub 6-0:1.0: USB hub found [ 1.199822] hub 6-0:1.0: 2 ports detected [ 1.199907] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.199915] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.199919] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.199971] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.200020] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 1.200061] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.200064] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.200067] usb usb7: Product: UHCI Host Controller [ 1.200069] usb usb7: Manufacturer: Linux 2.6.38.8-35.fc15.i686 uhci_hcd [ 1.200072] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.200179] hub 7-0:1.0: USB hub found [ 1.200184] hub 7-0:1.0: 2 ports detected [ 1.200364] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.224829] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.224836] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.224961] mousedev: PS/2 mouse device common for all mice [ 1.226019] rtc_cmos 00:07: RTC can wake from S4 [ 1.226081] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.226117] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.226215] device-mapper: uevent: version 1.0.3 [ 1.226313] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel [ 1.226384] cpuidle: using governor ladder [ 1.226430] cpuidle: using governor menu [ 1.226619] usbcore: registered new interface driver usbhid [ 1.226621] usbhid: USB HID core driver [ 1.226642] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.226851] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.226868] TCP cubic registered [ 1.226869] Initializing XFRM netlink socket [ 1.226880] NET: Registered protocol family 17 [ 1.226899] Registering the dns_resolver key type [ 1.226922] Using IPI No-Shortcut mode [ 1.227058] PM: Hibernation image not present or could not be loaded. [ 1.227072] registered taskstats version 1 [ 1.227155] IMA: No TPM chip found, activating TPM-bypass! [ 1.227666] Magic number: 3:910:574 [ 1.227769] rtc_cmos 00:07: setting system clock to 2011-07-27 08:34:18 UTC (1311755658) [ 1.227807] Initalizing network drop monitor service [ 1.227898] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N ED01 PQ: 0 ANSI: 5 [ 1.232749] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.232752] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.232917] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.233117] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.246532] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.692021] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 1.843827] usb 4-1: New USB device found, idVendor=08ff, idProduct=2580 [ 1.843831] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.843833] usb 4-1: Product: Fingerprint Sensor [ 1.938102] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.938121] ata3.01: SATA link down (SStatus 0 SControl 300) [ 1.942460] ata3.00: ATA-8: ST9250827AS, 3.CMF, max UDMA/100 [ 1.942463] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.948296] ata3.00: configured for UDMA/100 [ 1.948396] scsi 2:0:0:0: Direct-Access ATA ST9250827AS 3.CM PQ: 0 ANSI: 5 [ 1.948567] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.948649] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.948711] sd 2:0:0:0: [sda] Write Protect is off [ 1.948714] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.948741] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.000837] sda: sda1 sda2 [ 2.001126] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.218303] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x25c0b1, caps: 0xa04711/0xa00000/0x0 [ 2.298970] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 [ 2.491030] ata4.01: failed to resume link (SControl 0) [ 2.502421] ata4.00: SATA link down (SStatus 0 SControl 300) [ 2.502443] ata4.01: SATA link down (SStatus 0 SControl 0) [ 2.502506] Freeing unused kernel memory: 568k freed [ 2.502814] Write protecting the kernel text: 3968k [ 2.502844] Write protecting the kernel read-only data: 1952k [ 2.541469] dracut: dracut-009-11.fc15 [ 2.551822] dracut: rd.luks=0: removing cryptoluks activation [ 2.564841] udev[109]: starting version 167 [ 2.605332] acpi device:04: registered as cooling_device1 [ 2.605437] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5 [ 2.605507] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 2.683992] [drm] Initialized drm 1.1.0 20060810 [ 2.723771] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 2.723777] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 2.723792] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.723798] nouveau 0000:01:00.0: setting latency timer to 64 [ 2.727123] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046700a3) [ 2.729183] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 2.808147] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 2.808153] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 2.808157] [drm] nouveau 0000:01:00.0: Bios version 05.72.22.54 [ 2.808161] [drm] nouveau 0000:01:00.0: TMDS table version 1.1 [ 2.808163] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed [ 2.808166] [drm] nouveau 0000:01:00.0: BIT table 'd' not found [ 2.808169] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0 [ 2.808173] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 03005323 00000004 [ 2.808176] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01010300 00000028 [ 2.808179] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 020323f1 00a0c030 [ 2.808182] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2 [ 2.808186] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 2.808189] [drm] nouveau 0000:01:00.0: 1: 0x00001130: type 0x30 idx 1 tag 0x07 [ 2.808192] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 2.808195] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 2.808199] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 2.808202] [drm] nouveau 0000:01:00.0: 5: 0x00000340: type 0x40 idx 5 tag 0xff [ 2.808205] [drm] nouveau 0000:01:00.0: 6: 0x00002431: type 0x31 idx 6 tag 0x08 [ 2.808213] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD146 [ 2.808269] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD475 [ 2.823507] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDA13 [ 2.823529] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDB8E [ 2.824658] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDDE7 [ 2.844117] [drm] nouveau 0000:01:00.0: 3 available performance level(s) [ 2.844122] [drm] nouveau 0000:01:00.0: 0: memory 270MHz core 100MHz voltage 1000mV fanspeed 100% [ 2.844126] [drm] nouveau 0000:01:00.0: 1: memory 400MHz core 200MHz voltage 1000mV fanspeed 100% [ 2.844131] [drm] nouveau 0000:01:00.0: 2: memory 600MHz core 350MHz voltage 1100mV fanspeed 100% [ 2.844140] [drm] nouveau 0000:01:00.0: c: memory 391MHz core 222MHz [ 2.844293] [TTM] Zone kernel: Available graphics memory: 432740 kiB. [ 2.844296] [TTM] Zone highmem: Available graphics memory: 1030152 kiB. [ 2.844298] [TTM] Initializing pool allocator. [ 2.844322] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM [ 2.856756] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 2.856850] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 2.923693] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.923696] [drm] No driver support for vblank timestamp query. [ 2.925332] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own [ 2.925339] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0) [ 2.925343] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 2.925346] [drm] nouveau 0000:01:00.0: 0xC28D: Parsing digital output script table [ 3.185404] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [ 3.185408] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2) [ 3.343566] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x49000, bo f362c600 [ 3.343711] fbcon: nouveaufb (fb0) is primary device [ 3.358725] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 3.358729] [drm] nouveau 0000:01:00.0: 0xC2EE: Parsing digital output script table [ 3.490777] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0) [ 3.490779] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 3.490782] [drm] nouveau 0000:01:00.0: 0xC27E: Parsing digital output script table [ 3.490791] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A [ 3.493568] Console: switching to colour frame buffer device 160x50 [ 3.496030] fb0: nouveaufb frame buffer device [ 3.496032] drm: registered panic notifier [ 3.496042] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 3.543164] dracut: Starting plymouth daemon [ 3.794790] dracut: rd.dm=0: removing DM RAID activation [ 3.805552] dracut: rd.md=0: removing MD RAID activation [ 4.117539] firewire_ohci 0000:08:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.120881] sdhci: Secure Digital Host Controller Interface driver [ 4.120885] sdhci: Copyright(c) Pierre Ossman [ 4.170118] firewire_ohci: Added fw-ohci device 0000:08:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 4.170738] sdhci-pci 0000:08:06.1: SDHCI controller found [1180:0822] (rev 22) [ 4.170756] sdhci-pci 0000:08:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 4.171797] sdhci-pci 0000:08:06.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 4.172899] Registered led device: mmc0:: [ 4.174016] mmc0: SDHCI controller on PCI [0000:08:06.1] using DMA [ 4.359360] dracut: Scanning devices sda2 for LVM logical volumes VolGroup/lv_root VolGroup/lv_swap [ 4.405756] dracut: inactive '/dev/VolGroup/lv_swap' [3.94 GiB] inherit [ 4.405856] dracut: inactive '/dev/VolGroup/lv_home' [178.44 GiB] inherit [ 4.405949] dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit [ 4.671151] firewire_core: created device fw0: GUID 00023f89ac404367, S400 [ 4.846131] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 4.938803] dracut: Checking filesystems [ 4.938834] dracut: fsck -T -t noopts=_netdev -A -a [ 4.998275] dracut: _Fedora-15-Beta-: clean, 161483/3276800 files, 1965941/13107200 blocks [ 4.998539] dracut: Remounting /dev/mapper/VolGroup-lv_root with -o ro, [ 5.023098] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 5.042640] dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root [ 5.209418] dracut: Switching root [ 5.897891] type=1404 audit(1311755663.168:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 6.117563] SELinux: 2048 avtab hash slots, 224118 rules. [ 6.215222] SELinux: 2048 avtab hash slots, 224118 rules. [ 6.800142] SELinux: 9 users, 13 roles, 3622 types, 192 bools, 1 sens, 1024 cats [ 6.800147] SELinux: 81 classes, 224118 rules [ 6.809695] SELinux: Completing initialization. [ 6.809700] SELinux: Setting up existing superblocks. [ 6.809712] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 6.809721] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 6.809739] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 6.809747] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 6.809757] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 6.809784] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 6.810338] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 6.810345] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 6.811192] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 6.811203] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 6.811208] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 6.811227] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 6.811241] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 6.811256] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 6.811273] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 6.811283] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 6.811290] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 6.811676] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 6.811686] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 6.811969] SELinux: initialized (dev dm-1, type ext4), uses xattr [ 6.819554] type=1403 audit(1311755664.090:3): policy loaded auid=4294967295 ses=4294967295 [ 7.137085] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.137903] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.487175] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.487589] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.487983] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.488431] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.488843] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.489280] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.489671] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.490089] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.490512] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.549078] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora) [ 7.900889] NET: Registered protocol family 10 [ 7.938955] systemd[1]: Set hostname to <localhost.localdomain>. [ 9.809217] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 9.822943] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 9.824200] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 9.825587] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 9.826368] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 15.460301] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 18.137324] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 18.305211] udev[429]: starting version 167 [ 18.607324] iTCO_vendor_support: vendor-support=0 [ 18.619791] WARNING! power/level is deprecated; use power/control instead [ 18.621994] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 18.650612] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 18.650619] ACPI: resource 0000:00:1f.3 [io 0x1c00-0x1c1f] conflicts with ACPI region SMBI [io 0x1c00-0x1c0f] [ 18.650622] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.654270] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 18.654966] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 18.714756] tg3.c:v3.116 (December 3, 2010) [ 18.714797] tg3 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 18.714815] tg3 0000:06:00.0: setting latency timer to 64 [ 18.806221] wmi: Mapper loaded [ 19.071511] cfg80211: Calling CRDA to update world regulatory domain [ 19.074846] microcode: CPU0 sig=0x10661, pf=0x80, revision=0x33 [ 19.074907] microcode: Microcode Update Driver: v2.00 <tigran.co.uk>, Peter Oruba [ 19.189961] r852 0000:08:06.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 19.204507] r852: driver loaded succesfully [ 19.258861] tg3 0000:06:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1e:ec:99:e8:de [ 19.258866] tg3 0000:06:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0]) [ 19.258870] tg3 0000:06:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 19.258874] tg3 0000:06:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 19.370119] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 19.370211] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 19.370244] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 19.375439] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds [ 19.375443] iwl3945: Copyright(c) 2003-2010 Intel Corporation [ 19.375547] iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.375563] iwl3945 0000:04:00.0: setting latency timer to 64 [ 19.432205] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 19.432209] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 19.432359] iwl3945 0000:04:00.0: irq 46 for MSI/MSI-X [ 19.507115] mtp-probe[491]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1" [ 19.521493] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 19.663267] cfg80211: World regulatory domain updated: [ 19.663272] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.663275] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.663279] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.663282] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.663285] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.663288] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.753937] mtp-probe[491]: bus: 4, device: 2 was not an MTP device [ 19.756336] udevd-work[436]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/power/level} for writing: No such file or directory [ 27.084929] cfg80211: Calling CRDA for country: MK [ 27.100487] cfg80211: Regulatory domain changed to country: MK [ 27.100490] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.100493] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 27.100497] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 27.100500] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 27.100503] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 30.521700] Adding 4128764k swap on /dev/mapper/VolGroup-lv_swap. Priority:0 extents:1 across:4128764k [ 30.780347] systemd-fsck[661]: /dev/sda1: clean, 47/128016 files, 87098/512000 blocks [ 30.933291] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 30.942391] SELinux: initialized (dev sda1, type ext4), uses xattr [ 32.520172] systemd-fsck[698]: /dev/mapper/VolGroup-lv_home: clean, 33407/11698176 files, 37793398/46776320 blocks [ 32.746487] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 32.746501] SELinux: initialized (dev dm-2, type ext4), uses xattr [ 34.724041] tg3 0000:06:00.0: irq 47 for MSI/MSI-X [ 34.971923] Bluetooth: Core ver 2.15 [ 34.973670] NET: Registered protocol family 31 [ 34.973672] Bluetooth: HCI device and connection manager initialized [ 34.973676] Bluetooth: HCI socket layer initialized [ 34.978846] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.992497] Bluetooth: L2CAP ver 2.15 [ 34.992500] Bluetooth: L2CAP socket layer initialized [ 35.039806] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 35.039809] Bluetooth: BNEP filters: protocol multicast [ 35.068821] Bluetooth: SCO (Voice Link) ver 0.6 [ 35.068823] Bluetooth: SCO socket layer initialized [ 35.234147] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 36.379902] tg3 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex [ 36.379907] tg3 0000:06:00.0: eth0: Flow control is on for TX and on for RX [ 36.380101] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 37.714623] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available [ 37.780064] 802.1Q VLAN Support v1.8 Ben Greear <greearb> [ 37.780067] All bugs added by David S. Miller <davem> [ 39.374791] lp: driver loaded but no devices found [ 39.490980] ppdev: user-space parallel port driver [ 41.894974] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0) [ 41.894979] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 41.894983] [drm] nouveau 0000:01:00.0: 0xC28D: Parsing digital output script table [ 42.165484] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 42.165487] [drm] nouveau 0000:01:00.0: 0xC2EE: Parsing digital output script table [ 42.297536] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0) [ 42.297539] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 42.297542] [drm] nouveau 0000:01:00.0: 0xC27E: Parsing digital output script table [ 42.297551] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A [ 43.892846] fuse init (API version 7.16) [ 43.915701] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts [ 44.038576] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts [ 47.298023] eth0: no IPv6 routers present [ 1997.227429] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [lappy@localhost ~]$
I can't give "drm.debug=0x04" output, because I don't know how to do that. I'm running default system without kernel modifications. Thanks!
*** This bug has been marked as a duplicate of bug 725437 ***