Hide Forgot
Description of problem: I was using SL6.0 not too much ago with no problems at all (testing before installing it to my HD) but since automatically updating to SL6.1 and restart, I can't connect to internet by wireless. Wired connection:OK. Version-Release number of selected component (if applicable): iwl3945-firmware version:15.32.2.9 as see further below at (***) Steps to Reproduce: I tried some commands as followings: 1.#yum check-update iwl3945-firmware.arch; 2.and #yum -reinstall [firmware] with no changes at all. 3.I also tried to update NetworkManager Applet from 0.8.1 to 0.9 and 0.8.4 but installation abort with same output for both cases: "intool too old (...)" or something like that (sorry I didn't write down the exact output) Actual results: Network Manager Applet says -device no ready Additional info: Here some further info: (*) [xekatto@livecd ~]$ su [root@livecd liveuser]# lsmod | grep -i iwl iwl3945 69051 0 iwlcore 63727 1 iwl3945 mac80211 132542 2 iwl3945,iwlcore cfg80211 118084 3 iwl3945,iwlcore,mac80211 [root@livecd liveuser]# ----------------------- (**) [root@livecd liveuser]# dmesg | grep -i wifi iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG iwl3945 0000:04:00.0: firmware: requesting iwlwifi-3945-2.ucode [root@livecd liveuser]# --------------------------- (***) [root@livecd liveuser]# dmesg | grep -i firm [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function iwl3945 0000:04:00.0: firmware: requesting iwlwifi-3945-2.ucode iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9 [root@livecd liveuser]# ------------------------------------- I would appreciate any clue. Txe
What show iwconfig and ifconfig? Please also attach full dmesg output.
(In reply to comment #3) > What show iwconfig and ifconfig? Please also attach full dmesg output. [xekatto@livecd ~]$ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off [xekatto@livecd ~]$ ---------------------------------- [xekatto@livecd ~]$ ifconfig eth0 Link encap:Ethernet HWaddr 00:16:D4:2D:55:F9 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:24 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:960 (960.0 b) TX bytes:960 (960.0 b) wlan0 Link encap:Ethernet HWaddr 00:18:DE:7E:13:3F UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) [xekatto@livecd ~]$ ------------------------------------ [xekatto@livecd ~]$ dmesg Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0xfe00-0xfe7f has been reserved system 00:01: ioport range 0xfe80-0xfeff has been reserved system 00:01: ioport range 0xff00-0xff7f has been reserved system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: bridge window [0x2000-0x2fff] pci 0000:00:1c.0: bridge window [0xd6000000-0xd7ffffff] pci 0000:00:1c.0: bridge window [0xd0000000-0xd1ffffff] pci 0000:00:1c.1: PCI bridge to [bus 04-04] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.1: bridge window [0x3000-0x3fff] pci 0000:00:1c.1: bridge window [0xd8000000-0xd9ffffff] pci 0000:00:1c.1: bridge window [0xd2000000-0xd3ffffff] pci 0000:00:1c.2: PCI bridge to [bus 05-05] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.2: bridge window [0x4000-0x4fff] pci 0000:00:1c.2: bridge window [0xda000000-0xdbffffff] pci 0000:00:1c.2: bridge window [0xd4000000-0xd5ffffff] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07 pci 0000:06:04.0: IO window: 0x005400-0x0054ff pci 0000:06:04.0: IO window: 0x005800-0x0058ff pci 0000:06:04.0: PREFETCH window: 0xf0000000-0xf3ffffff pci 0000:06:04.0: MEM window: 0xf4000000-0xf7ffffff pci 0000:00:1e.0: PCI bridge to [bus 06-07] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: bridge window [0x5000-0x5fff] pci 0000:00:1e.0: bridge window [0xdc000000-0xdc0fffff] pci 0000:00:1e.0: bridge window [0xf0000000-0xf3ffffff] pci 0000:00:1c.0: PCIe errors handled by OS. alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCIe errors handled by OS. alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCIe errors handled by OS. alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0xd6000000-0xd7ffffff] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xd1ffffff] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff] pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff] pci_bus 0000:04: resource 2 pref mem [0xd2000000-0xd3ffffff] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff] pci_bus 0000:05: resource 1 mem: [0xda000000-0xdbffffff] pci_bus 0000:05: resource 2 pref mem [0xd4000000-0xd5ffffff] pci_bus 0000:06: resource 0 io: [0x5000-0x5fff] pci_bus 0000:06: resource 1 mem: [0xdc000000-0xdc0fffff] pci_bus 0000:06: resource 2 pref mem [0xf0000000-0xf3ffffff] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:07: resource 0 io: [0x5400-0x54ff] pci_bus 0000:07: resource 1 io: [0x5800-0x58ff] pci_bus 0000:07: resource 2 pref mem [0xf0000000-0xf3ffffff] pci_bus 0000:07: resource 3 mem: [0xf4000000-0xf7ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 17253k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1326451406.719:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1705 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key CB518380B650FDBF - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program <secalert> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: PCIe errors handled by OS. pcieport 0000:00:1c.1: PCIe errors handled by OS. pcieport 0000:00:1c.2: PCIe errors handled by OS. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered pci-stub: invalid id string "" intel_idle: MWAIT substates: 0x22220 intel_idle: does not run on family 6 model 14 ACPI: AC Adapter [ACAD] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle ACPI: SSDT bf681241 001DE (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT bf680fe0 001DC (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Marking TSC unstable due to TSC halts in idle processor LNXCPU:00: registered as cooling_device0 ACPI: SSDT bf68141f 0007D (v01 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT bf6811bc 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) processor LNXCPU:01: registered as cooling_device1 Switching to clocksource hpet ERST: Table is not found! isapnp: Scanning for PnP cards... ACPI: Battery Slot [BAT1] (battery present) isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 8192K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input3 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc444000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-131.6.1.el6.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-131.6.1.el6.i686 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-131.6.1.el6.i686 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-131.6.1.el6.i686 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32-131.6.1.el6.i686 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 rtc_cmos 00:07: setting system clock to 2012-01-13 10:43:27 UTC (1326451407) Initalizing network drop monitor service Freeing unused kernel memory: 524k freed Write protecting the kernel text: 4264k Write protecting the kernel read-only data: 1824k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 dracut: dracut-004-53.el6 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: root was live:/dev/disk/by-uuid/9616c836-f5be-49a9-9e32-1c04acad4dde, liveroot is now live:UUID=9616c836-f5be-49a9-9e32-1c04acad4dde device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.20.6-ioctl (2011-02-02) initialised: dm-devel udev: starting version 147 [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function acpi device:07: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7 usb 1-4: new high speed USB device using ehci_hcd and address 2 vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] initialized overlay support usb 1-4: New USB device found, idVendor=13fe, idProduct=3600 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: USB DISK 2.0 usb 1-4: Manufacturer: usb 1-4: SerialNumber: 07B70601654F2E86 usb 1-4: configuration #1 chosen from 1 choice fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device drm: registered panic notifier Slow work thread pool: Starting up Slow work thread pool: Ready [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 4-1: new full speed USB device using uhci_hcd and address 2 dracut: Starting plymouth daemon usb 4-1: New USB device found, idVendor=0a05, idProduct=7211 usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 4-1: Product: USB2.0 HUB usb 4-1: configuration #1 chosen from 1 choice hub 4-1:1.0: USB hub found hub 4-1:1.0: 4 ports detected dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation usb 4-1.1: new low speed USB device using uhci_hcd and address 3 ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] usb 4-1.1: New USB device found, idVendor=062a, idProduct=0000 usb 4-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 4-1.1: configuration #1 chosen from 1 choice input: HID 062a:0000 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1.1/4-1.1:1.0/input/input8 generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.2-1.1/input0 ata_piix 0000:00:1f.2: setting latency timer to 64 scsi1 : ata_piix scsi2 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15 ata1.00: ATA-7: HTS541080G9SA00, MB4OC60R, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, PT06, max UDMA/33 ata1.00: configured for UDMA/100 scsi 1:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4O PQ: 0 ANSI: 5 ata2.00: configured for UDMA/33 scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N PT06 PQ: 0 ANSI: 5 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:05:00.0: setting latency timer to 64 alloc irq_desc for 24 on node -1 alloc kstat_irqs on node -1 r8169 0000:05:00.0: irq 24 for MSI/MSI-X eth0: RTL8101e at 0xf800a000, 00:16:d4:2d:55:f9, XID 14000000 IRQ 24 alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 firewire_ohci 0000:06:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 firewire_ohci: Added fw-ohci device 0000:06:00.0, OHCI version 1.10 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Registered led device: mmc1:: mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 1:0:0:0: [sda] Attached SCSI disk firewire_core: created device fw0: GUID 00023f6a99406c52, S400 dracut: Scanning devices sda3 for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "vg_txe" using metadata type lvm2 dracut: 2 logical volume(s) in volume group "vg_txe" now active usb-storage: device scan complete scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS sd 0:0:0:0: [sdb] 62808064 512-byte logical blocks: (32.1 GB/29.9 GiB) sd 0:0:0:0: [sdb] Write Protect is off sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00 sd 0:0:0:0: [sdb] Assuming drive cache: write through sd 0:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 0:0:0:0: [sdb] Assuming drive cache: write through sd 0:0:0:0: [sdb] Attached SCSI removable disk kjournald starting. Commit interval 5 seconds EXT3-fs (sdb1): using internal journal EXT3-fs (sdb1): recovery complete EXT3-fs (sdb1): mounted filesystem with ordered data mode squashfs: version 4.0 (2009/01/31) Phillip Lougher EXT4-fs (dm-2): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/live-rw dracut: Loading SELinux policy type=1404 audit(1326451427.349:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 2048 avtab hash slots, 212877 rules. SELinux: 2048 avtab hash slots, 212877 rules. SELinux: 9 users, 13 roles, 3431 types, 178 bools, 1 sens, 1024 cats SELinux: 81 classes, 212877 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-2, type ext4), uses xattr SELinux: initialized (dev loop2, type squashfs), not configured for labeling SELinux: initialized (dev loop0, type squashfs), not configured for labeling SELinux: initialized (dev sdb1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1326451428.276:3): policy loaded auid=4294967295 ses=4294967295 dracut: dracut: Switching root readahead: starting udev: starting version 147 alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 alloc irq_desc for 25 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: irq 25 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: ALC861: BIOS auto-probing. intel_rng: FWH not detected iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x18c0-0x18df] conflicts with ACPI region SMBI [0x18c0-0x18cf] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver sd 1:0:0:0: Attached scsi generic sg0 type 0 sr 2:0:0:0: Attached scsi generic sg1 type 5 sd 0:0:0:0: Attached scsi generic sg2 type 0 cfg80211: Calling CRDA to update world regulatory domain iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s iwl3945: Copyright(c) 2003-2010 Intel Corporation iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:04:00.0: setting latency timer to 64 iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG alloc irq_desc for 26 on node -1 alloc kstat_irqs on node -1 iwl3945 0000:04:00.0: irq 26 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-3945-rs' yenta_cardbus 0000:06:04.0: CardBus bridge found [1179:ff01] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:06:04.0: TI: mfunc 0x89501212, devctl 0x44 yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x08f8, PCI irq 16 yenta_cardbus 0000:06:04.0: Socket status: 30000006 pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean. yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts Adding 2031608k swap on /dev/mapper/vg_txe-lv_swap. Priority:-1 extents:1 across:2031608k kjournald starting. Commit interval 5 seconds EXT3-fs (loop5): using internal journal EXT3-fs (loop5): mounted filesystem with ordered data mode SELinux: initialized (dev loop5, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team 802.1Q VLAN Support v1.8 Ben Greear <greearb> All bugs added by David S. Miller <davem> cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.14 (Mar 30, 2011) bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.2 (Mar 28, 2011) iwl3945 0000:04:00.0: firmware: requesting iwlwifi-3945-2.ucode iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9 ADDRCONF(NETDEV_UP): wlan0: link is not ready r8169: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts fuse init (API version 7.13) [xekatto@livecd ~]$
I do not see any bug here. At least not in iwl3945. There is no error message is dmesg, wlan0 device is created. This seems to be configuration issue, eventually NetworkManager problem. Check if /etc/sysconfig/network-scripts/ifcfg-wlan0 has NM_CONTROLLED="yes" entry and NetworkManager applet has "Enable Wireless" enabled marked. I'm reassigning the but to NetworkManager.
Please show us these: $ rpm -q NetworkManager $ rpm -q NetworkManager-gnome $ nmcli dev $ nmcli nm $ nmcli con list
Since RHEL 6.3 External Beta has begun, and this bug remains unresolved, it has been rejected as it is not proposed as exception or blocker. Red Hat invites you to ask your support representative to propose this request, if appropriate and relevant, in the next release of Red Hat Enterprise Linux.