Hide Forgot
Description of problem: Apprently Jule Verne didn't have a digital camera. When plugin in the SD Card reader nothing happens. The /var/log/messages is showing this Jan 14 16:57:56 tower kernel: [ 2.130017] usb 7-1: new full speed USB device number 2 using uhci_hcd Jan 14 16:57:56 tower kernel: [ 2.243028] usb 7-1: device descriptor read/64, error -71 Jan 14 16:57:56 tower kernel: [ 2.279347] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) Jan 14 16:57:56 tower kernel: [ 2.279357] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Jan 14 16:57:56 tower kernel: [ 2.280649] scsi6 : pata_jmicron Jan 14 16:57:56 tower kernel: [ 2.281688] scsi7 : pata_jmicron Jan 14 16:57:56 tower kernel: [ 2.282189] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 Jan 14 16:57:56 tower kernel: [ 2.282192] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 Jan 14 16:57:56 tower kernel: [ 2.457021] usb 7-1: device descriptor read/64, error -71 Jan 14 16:57:56 tower kernel: [ 2.597190] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jan 14 16:57:56 tower kernel: [ 2.650056] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11 Jan 14 16:57:56 tower kernel: [ 2.660017] usb 7-1: new full speed USB device number 3 using uhci_hcd Jan 14 16:57:56 tower kernel: [ 2.773038] usb 7-1: device descriptor read/64, error -71 Jan 14 16:57:56 tower kernel: [ 2.987031] usb 7-1: device descriptor read/64, error -71 Jan 14 16:57:56 tower kernel: [ 3.151138] firewire_core: created device fw0: GUID 001e8c00010aec51, S400 Jan 14 16:57:56 tower kernel: [ 3.190028] usb 7-1: new full speed USB device number 4 using uhci_hcd Jan 14 16:57:56 tower kernel: [ 3.598071] usb 7-1: device not accepting address 4, error -71 Jan 14 16:57:56 tower kernel: [ 3.700030] usb 7-1: new full speed USB device number 5 using uhci_hcd Jan 14 16:57:56 tower kernel: [ 4.108062] usb 7-1: device not accepting address 5, error -71 Jan 14 16:57:56 tower kernel: [ 4.108074] hub 7-0:1.0: unable to enumerate USB device on port 1 Version-Release number of selected component (if applicable): - How reproducible: Plugin in the Sandisk USB SD Card reader Actual results: The Cardreader LED blinks up, nothing else happens. Expected results: Gnome dialog with new drive should show up Additional info: The Sandisk Cruzer SD Card reade looks like this http://bilder.preisvergleich.org/products/DE/800/000/012/984/E_000012984529_DE_800.jpg This used to work in older of Fedora. I couldn't find a working workaround so far.
[mass update] kernel-3.3.0-4.fc16 has been pushed to the Fedora 16 stable repository. Please retest with this update.
issue still exists with Linux tower 3.3.0-4.fc16.x86_64 #1 SMP Tue Mar 20 18:05:40 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux full log Mar 30 08:53:00 tower dbus-daemon[899]: ** Message: No devices in use, exit Mar 30 08:53:33 tower kernel: [ 497.561031] usb 7-2: new full-speed USB device number 2 using uhci_hcd Mar 30 08:53:33 tower kernel: [ 497.775041] usb 7-2: New USB device found, idVendor=0781, idProduct=8888 Mar 30 08:53:33 tower kernel: [ 497.775046] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 30 08:53:33 tower kernel: [ 497.775050] usb 7-2: Product: Cruzer Mar 30 08:53:33 tower kernel: [ 497.775052] usb 7-2: Manufacturer: SanDisk Mar 30 08:53:33 tower kernel: [ 497.775055] usb 7-2: SerialNumber: 0E2703000304 Mar 30 08:53:33 tower mtp-probe: checking bus 7, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2" Mar 30 08:53:33 tower mtp-probe: bus: 7, device: 2 was not an MTP device Mar 30 08:53:33 tower kernel: [ 498.062100] Initializing USB Mass Storage driver... Mar 30 08:53:33 tower kernel: [ 498.062314] scsi8 : usb-storage 7-2:1.0 Mar 30 08:53:33 tower kernel: [ 498.062419] usbcore: registered new interface driver usb-storage Mar 30 08:53:33 tower kernel: [ 498.062422] USB Mass Storage support registered. Mar 30 08:53:34 tower kernel: [ 499.069074] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 2.00 PQ: 0 ANSI: 0 CCS Mar 30 08:53:34 tower kernel: [ 499.070098] sd 8:0:0:0: Attached scsi generic sg2 type 0 Mar 30 08:53:39 tower kernel: [ 503.641063] sd 8:0:0:0: [sdb] 1 512-byte logical blocks: (512 B/512 B) Mar 30 08:53:39 tower kernel: [ 503.644061] sd 8:0:0:0: [sdb] Write Protect is on Mar 30 08:53:39 tower kernel: [ 503.647056] sd 8:0:0:0: [sdb] No Caching mode page present Mar 30 08:53:39 tower kernel: [ 503.647060] sd 8:0:0:0: [sdb] Assuming drive cache: write through Mar 30 08:53:39 tower kernel: [ 503.665056] sd 8:0:0:0: [sdb] No Caching mode page present Mar 30 08:53:39 tower kernel: [ 503.665062] sd 8:0:0:0: [sdb] Assuming drive cache: write through Mar 30 08:54:09 tower kernel: [ 533.882032] usb 7-2: reset full-speed USB device number 2 using uhci_hcd Mar 30 08:54:09 tower kernel: [ 533.996028] usb 7-2: device descriptor read/64, error -71 Mar 30 08:54:10 tower kernel: [ 534.261023] usb 7-2: device descriptor read/64, error -71 Mar 30 08:54:10 tower kernel: [ 534.515021] usb 7-2: reset full-speed USB device number 2 using uhci_hcd Mar 30 08:54:10 tower kernel: [ 534.679026] usb 7-2: device descriptor read/64, error -71 Mar 30 08:54:10 tower kernel: [ 534.945026] usb 7-2: device descriptor read/64, error -71 Mar 30 08:54:11 tower kernel: [ 535.148027] usb 7-2: reset full-speed USB device number 2 using uhci_hcd Mar 30 08:54:11 tower kernel: [ 535.558053] usb 7-2: device not accepting address 2, error -71 Mar 30 08:54:11 tower kernel: [ 535.660028] usb 7-2: reset full-speed USB device number 2 using uhci_hcd Mar 30 08:54:11 tower kernel: [ 536.069021] usb 7-2: device not accepting address 2, error -71 Mar 30 08:54:11 tower kernel: [ 536.069049] usb 7-2: USB disconnect, device number 2 Mar 30 08:54:11 tower kernel: [ 536.069083] sd 8:0:0:0: Device offlined - not ready after error recovery Mar 30 08:54:11 tower kernel: [ 536.069093] sd 8:0:0:0: [sdb] Unhandled error code Mar 30 08:54:11 tower kernel: [ 536.069096] sd 8:0:0:0: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK Mar 30 08:54:11 tower kernel: [ 536.069101] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 Mar 30 08:54:11 tower kernel: [ 536.069112] end_request: I/O error, dev sdb, sector 0 Mar 30 08:54:11 tower kernel: [ 536.069118] Buffer I/O error on device sdb, logical block 0 Mar 30 08:54:11 tower kernel: [ 536.069228] Dev sdb: unable to read RDB block 0 Mar 30 08:54:11 tower kernel: [ 536.069249] sdb: unable to read partition table Mar 30 08:54:11 tower kernel: [ 536.069496] sd 8:0:0:0: [sdb] READ CAPACITY failed Mar 30 08:54:11 tower kernel: [ 536.069499] sd 8:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Mar 30 08:54:11 tower kernel: [ 536.069504] sd 8:0:0:0: [sdb] Sense not available. Mar 30 08:54:11 tower kernel: [ 536.069534] sd 8:0:0:0: [sdb] Write Protect is off Mar 30 08:54:11 tower kernel: [ 536.069554] sd 8:0:0:0: [sdb] Asking for cache data failed Mar 30 08:54:11 tower kernel: [ 536.069557] sd 8:0:0:0: [sdb] Assuming drive cache: write through Mar 30 08:54:11 tower kernel: [ 536.069561] sd 8:0:0:0: [sdb] Attached SCSI removable disk Mar 30 08:54:12 tower kernel: [ 536.223024] usb 7-2: new full-speed USB device number 3 using uhci_hcd Mar 30 08:54:12 tower kernel: [ 536.387014] usb 7-2: device descriptor read/64, error -71 Mar 30 08:54:12 tower kernel: [ 536.601022] usb 7-2: device descriptor read/64, error -71 Mar 30 08:54:12 tower kernel: [ 536.804029] usb 7-2: new full-speed USB device number 4 using uhci_hcd Mar 30 08:54:12 tower kernel: [ 536.969028] usb 7-2: device descriptor read/64, error -71 Mar 30 08:54:13 tower kernel: [ 537.234021] usb 7-2: device descriptor read/64, error -71 Mar 30 08:54:13 tower kernel: [ 537.488028] usb 7-2: new full-speed USB device number 5 using uhci_hcd Mar 30 08:54:13 tower kernel: [ 537.897065] usb 7-2: device not accepting address 5, error -71 Mar 30 08:54:13 tower kernel: [ 538.050025] usb 7-2: new full-speed USB device number 6 using uhci_hcd Mar 30 08:54:14 tower kernel: [ 538.458062] usb 7-2: device not accepting address 6, error -71 Mar 30 08:54:14 tower kernel: [ 538.458074] hub 7-0:1.0: unable to enumerate USB device on port 2
# Mass update to all open bugs. Kernel 3.6.2-1.fc16 has just been pushed to updates. This update is a significant rebase from the previous version. Please retest with this kernel, and let us know if your problem has been fixed. In the event that you have upgraded to a newer release and the bug you reported is still present, please change the version field to the newest release you have encountered the issue with. Before doing so, please ensure you are testing the latest kernel update in that release and attach any new and relevant information you may have gathered. If you are not the original bug reporter and you still experience this bug, please file a new report, as it is possible that you may be seeing a different problem. (Please don't clone this bug, a fresh bug referencing this bug in the comment is sufficient).
I am no on fedora 17 Kernel: [root@tower ~]# uname -a Linux tower 3.6.2-4.fc17.x86_64 #1 SMP Wed Oct 17 02:43:21 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux dmesg are looking better, but it's not getting automountanted. any advice? [ 1910.812462] usb 2-1.4: new full-speed USB device number 5 using ehci_hcd [ 1910.903550] usb 2-1.4: New USB device found, idVendor=0781, idProduct=8888 [ 1910.903554] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1910.903557] usb 2-1.4: Product: Cruzer [ 1910.903559] usb 2-1.4: Manufacturer: SanDisk [ 1910.903562] usb 2-1.4: SerialNumber: 0E2703000304 [ 1910.904222] scsi7 : usb-storage 2-1.4:1.0 [ 1911.908059] scsi 7:0:0:0: Direct-Access SanDisk Cruzer 2.00 PQ: 0 ANSI: 0 CCS [ 1911.911041] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 1911.914238] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 1918.537578] sd 7:0:0:0: [sdb] 1 512-byte logical blocks: (512 B/512 B) [ 1918.538438] sd 7:0:0:0: [sdb] Write Protect is on [ 1918.538442] sd 7:0:0:0: [sdb] Mode Sense: 43 00 80 00 [ 1918.539278] sd 7:0:0:0: [sdb] No Caching mode page present [ 1918.539281] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 1918.542903] sd 7:0:0:0: [sdb] No Caching mode page present [ 1918.542906] sd 7:0:0:0: [sdb] Assuming drive cache: write through
there are some more messages comming, actually still doesn't work [ 1949.404650] usb 2-1.4: device descriptor read/64, error -32 [ 1949.578398] usb 2-1.4: device descriptor read/64, error -32 [ 1949.752318] usb 2-1.4: reset full-speed USB device number 5 using ehci_hcd [ 1950.154057] usb 2-1.4: device not accepting address 5, error -32 [ 1950.227217] usb 2-1.4: reset full-speed USB device number 5 using ehci_hcd [ 1950.628810] usb 2-1.4: device not accepting address 5, error -32 [ 1950.629139] sd 7:0:0:0: Device offlined - not ready after error recovery [ 1950.629150] sd 7:0:0:0: [sdb] Unhandled error code [ 1950.629153] sd 7:0:0:0: [sdb] [ 1950.629155] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK [ 1950.629157] sd 7:0:0:0: [sdb] CDB: [ 1950.629158] Read(10): 28 00 00 00 00 00 00 00 01 00 [ 1950.629168] end_request: I/O error, dev sdb, sector 0 [ 1950.629172] Buffer I/O error on device sdb, logical block 0 [ 1950.629205] sd 7:0:0:0: rejecting I/O to offline device [ 1950.629223] sd 7:0:0:0: rejecting I/O to offline device [ 1950.629246] usb 2-1.4: USB disconnect, device number 5 [ 1950.629334] Dev sdb: unable to read RDB block 0 [ 1950.629349] sdb: unable to read partition table [ 1950.629598] sdb: detected capacity change from 512 to 0 [ 1950.702974] usb 2-1.4: new full-speed USB device number 6 using ehci_hcd [ 1950.776781] usb 2-1.4: device descriptor read/64, error -32 [ 1950.950703] usb 2-1.4: device descriptor read/64, error -32 [ 1951.124602] usb 2-1.4: new full-speed USB device number 7 using ehci_hcd [ 1951.197538] usb 2-1.4: device descriptor read/64, error -32 [ 1951.371590] usb 2-1.4: device descriptor read/64, error -32 [ 1951.545383] usb 2-1.4: new full-speed USB device number 8 using ehci_hcd [ 1951.947068] usb 2-1.4: device not accepting address 8, error -32 [ 1952.020125] usb 2-1.4: new full-speed USB device number 9 using ehci_hcd [ 1952.421892] usb 2-1.4: device not accepting address 9, error -32 [ 1952.422064] hub 2-1:1.0: unable to enumerate USB device on port 4
I have tried the sd card reader on a windows xp machine. It can regonize it, but is unable to show any data from the sd card. One thing that could be that is that my SD Card is to big. The card is 4GB. The reader is probably unable to read such big cards. Time to through it away, or better recycle it.