From Bugzilla Helper: User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.3) Gecko/20030314 Description of problem: Upon inserting the compact flash card, the card is briefly recognized but immediately thereafter about 12-14 interrupt errors appear as the PC card is attempted to be accessed. The system does not crash, simply the card can not be mounted. The card worked perfectly fine under RedHat 8.0. Version-Release number of selected component (if applicable): How reproducible: Always Steps to Reproduce: 1. Insert Compact Flash PC Card (Viking Components CFA 1757) 2. Wait for error messages to appear 3. Try and mount card Actual Results: Mount fails with errors. Expected Results: Card should have been mounted (mount -t vfat /dev/hdc1 /mnt/flash) and should be accessible Additional info:
I have also noticed similar problem with SimpleTech 256M card (that worked fine under RH8.0, but is not accessible under RH9). --- cs: memory probe 0xa0000000-0xa0ffffff: clean. hde: STI Flash S.1.0, CFA DISK drive ide2 at 0x100-0x107,0x10e on irq 5 ide-floppy driver 0.99.newide hde: status error: status=0x20 { DeviceFault } hde: drive not ready for command hde: 500400 sectors (256 MB) w/1KiB Cache, CHS=695/15/48 hde:hde: status error: status=0x20 { DeviceFault } hde: drive not ready for command ide2: reset: success hde: status error: status=0x20 { DeviceFault } hde: drive not ready for command ide2: reset: success hde: status error: status=0x20 { DeviceFault } .... --- It should be noted that smaller cards (SanDisk 32M & 128M) seem to work but inserting them also causes errors (cards seem to work though): --- hde: SanDisk SDCFB-32, CFA DISK drive ide2 at 0x100-0x107,0x10e on irq 5 ide-floppy driver 0.99.newide hde: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hde: task_no_data_intr: error=0x04 { DriveStatusError } hde: 62592 sectors (32 MB) w/1KiB Cache, CHS=489/4/32 hde: hde1 ide_cs: hde: Vcc = 3.3, Vpp = 0.0 ---
I am getting the exact same problem using a SimpleTech 1GB CF card in an IBM PcCard adapter. However, using a 256MB card with the same adapter works flawlessly. hde: STI Flash S.1.0, CFA DISK drive ide2 at 0x100-0x107,0x10e on irq 3 ide-floppy driver 0.99.newide hde: attached ide-disk driver. hde: status error: status=0x20 { DeviceFault } hde: drive not ready for command hde: 2002896 sectors (1025 MB) w/1KiB Cache, CHS=1987/16/63 hde:hde: status error: status=0x20 { DeviceFault } ...