Description of problem: While using the RHS2.0 update 4 (ANSHI) installer, a static IP can be entered After the installation sequence, the system reboots and then has a dynamic IP. Version-Release number of selected component (if applicable): RHS2.0 update 4 March 2013 How reproducible: Install the RHS product, configure static IP during installation. After reboot, system has a dynamic IP Steps to Reproduce: 1. Install from ISO: RHS-2.0-20130320.2-RHS-x86_64-DVD1.ISO 2. Configure static IP address 3. Complete installation and reboot Actual results: System has a dynamic IP (DHCP) Expected results: Should have a static IP address as configured during setup Additional info: Also IPv6 is initialized though this was turned off during setup
1. Installed from ISO: RHS-2.0-20130409.0/2/RHS/x86_64/iso/ 2. Configured static IPv4 address 3. deselected IPv6 3. Completed installation and rebooted Result 1. System now has static IP (configured at step 2) 2. BOOTPROTO="static" in ifcfg-ethX. 3. IPV6INIT does not exist in ifcfg-ethX.