(In reply to meili-hao from comment #0)
> Created attachment 868784 [details]
> Complete dmesg info
> 
> Description of problem:
> 
> my netbook is asus K450JF.The system will get stuck when i use fedora.
> 
> Version-Release number of selected component (if applicable):
> 
> fedora 20,x86_64,gnome,efi,Hitachi hard drive
> 
> Additional info:
> 
> dmesg info:
> 
> [    8.560506] btrfs: disk space caching is enabled
> [    9.544486] device label fedora devid 1 transid 1558 /dev/sda4
> [    9.550323] device label fedora devid 1 transid 1558 /dev/sda4
> [    9.923975] Adding 8142844k swap on /dev/sda3.  Priority:-1 extents:1
> across:8142844k FS
> [   10.782428] EXT4-fs (sda2): mounted filesystem with ordered data mode.
> Opts: (null)
> [   10.947078] SELinux: initialized (dev sda2, type ext4), uses xattr
> [   11.036931] systemd-journald[538]: Received request to flush runtime
> journal from PID 1
> [   11.415084] type=1305 audit(1393401812.160:4): audit_pid=646 old=0
> auid=4294967295 ses=4294967295
>  subj=system_u:system_r:auditd_t:s0 res=1
> [   18.730027] ata3: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe
> frozen
> [   18.730082] ata3: irq_stat 0x00400040, connection status changed
> [   18.730122] ata3: SError: { HostInt PHYRdyChg 10B8B DevExch }
> [   18.730167] ata3: hard resetting link
> [   18.730180] ata6.00: exception Emask 0x50 SAct 0x7fffffff SErr 0x4090800
> action 0xe frozen
> [   18.730214] ata6.00: irq_stat 0x00400040, connection status changed
> [   18.730239] ata6: SError: { HostInt PHYRdyChg 10B8B DevExch }
> [   18.730261] ata6.00: failed command: READ FPDMA QUEUED
> [   18.730283] ata6.00: cmd 60/08:00:30:d4:55/00:00:01:00:00/40 tag 0 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.730335] ata6.00: status: { DRDY }
> [   18.730351] ata6.00: failed command: READ FPDMA QUEUED
> [   18.730371] ata6.00: cmd 60/08:08:f0:79:5a/00:00:01:00:00/40 tag 1 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.730423] ata6.00: status: { DRDY }
> [   18.730438] ata6.00: failed command: READ FPDMA QUEUED
> [   18.730456] ata6.00: cmd 60/08:10:48:9c:59/00:00:01:00:00/40 tag 2 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.730508] ata6.00: status: { DRDY }
> [   18.730523] ata6.00: failed command: READ FPDMA QUEUED
> [   18.730544] ata6.00: cmd 60/08:18:20:26:56/00:00:01:00:00/40 tag 3 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.730596] ata6.00: status: { DRDY }
> [   18.730609] ata6.00: failed command: READ FPDMA QUEUED
> [   18.730630] ata6.00: cmd 60/08:20:30:d5:55/00:00:01:00:00/40 tag 4 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.730682] ata6.00: status: { DRDY }
> [   18.730696] ata6.00: failed command: READ FPDMA QUEUED
> [   18.730715] ata6.00: cmd 60/08:28:e0:1f:59/00:00:01:00:00/40 tag 5 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.730767] ata6.00: status: { DRDY }
> [   18.730782] ata6.00: failed command: READ FPDMA QUEUED
> [   18.730803] ata6.00: cmd 60/08:30:d8:fa:55/00:00:01:00:00/40 tag 6 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.730855] ata6.00: status: { DRDY }
> [   18.730870] ata6.00: failed command: READ FPDMA QUEUED
> [   18.730889] ata6.00: cmd 60/10:38:e0:c1:56/00:00:01:00:00/40 tag 7 ncq
> 8192 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.730941] ata6.00: status: { DRDY }
> [   18.730966] ata6.00: failed command: READ FPDMA QUEUED
> [   18.730993] ata6.00: cmd 60/08:40:20:a6:59/00:00:01:00:00/40 tag 8 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.731751] ata6.00: status: { DRDY }
> [   18.732342] ata6.00: failed command: READ FPDMA QUEUED
> [   18.732937] ata6.00: cmd 60/08:48:28:f9:55/00:00:01:00:00/40 tag 9 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.735011] ata6.00: status: { DRDY }
> [   18.736028] ata6.00: failed command: READ FPDMA QUEUED
> [   18.737073] ata6.00: cmd 60/08:50:08:d5:55/00:00:01:00:00/40 tag 10 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.739112] ata6.00: status: { DRDY }
> [   18.739712] ata6.00: failed command: READ FPDMA QUEUED
> [   18.740277] ata6.00: cmd 60/10:58:00:c5:56/00:00:01:00:00/40 tag 11 ncq
> 8192 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.741417] ata6.00: status: { DRDY }
> [   18.742005] ata6.00: failed command: READ FPDMA QUEUED
> [   18.742569] ata6.00: cmd 60/08:60:d8:9e:59/00:00:01:00:00/40 tag 12 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.743711] ata6.00: status: { DRDY }
> [   18.744296] ata6.00: failed command: READ FPDMA QUEUED
> [   18.744882] ata6.00: cmd 60/08:68:a0:79:5a/00:00:01:00:00/40 tag 13 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.746022] ata6.00: status: { DRDY }
> [   18.746608] ata6.00: failed command: READ FPDMA QUEUED
> [   18.747175] ata6.00: cmd 60/08:70:38:59:59/00:00:01:00:00/40 tag 14 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.748334] ata6.00: status: { DRDY }
> [   18.748914] ata6.00: failed command: READ FPDMA QUEUED
> [   18.749476] ata6.00: cmd 60/08:78:e0:7e:5a/00:00:01:00:00/40 tag 15 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.750625] ata6.00: status: { DRDY }
> [   18.751200] ata6.00: failed command: READ FPDMA QUEUED
> [   18.751781] ata6.00: cmd 60/08:80:50:7d:5a/00:00:01:00:00/40 tag 16 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.752909] ata6.00: status: { DRDY }
> [   18.753490] ata6.00: failed command: READ FPDMA QUEUED
> [   18.754072] ata6.00: cmd 60/10:88:c0:7d:5a/00:00:01:00:00/40 tag 17 ncq
> 8192 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.755223] ata6.00: status: { DRDY }
> [   18.755804] ata6.00: failed command: READ FPDMA QUEUED
> [   18.756356] ata6.00: cmd 60/08:90:b8:76:5a/00:00:01:00:00/40 tag 18 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.757506] ata6.00: status: { DRDY }
> [   18.758080] ata6.00: failed command: READ FPDMA QUEUED
> [   18.758662] ata6.00: cmd 60/08:98:28:2e:59/00:00:01:00:00/40 tag 19 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.759795] ata6.00: status: { DRDY }
> [   18.760374] ata6.00: failed command: READ FPDMA QUEUED
> [   18.760954] ata6.00: cmd 60/08:a0:48:e8:55/00:00:01:00:00/40 tag 20 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.762088] ata6.00: status: { DRDY }
> [   18.762670] ata6.00: failed command: READ FPDMA QUEUED
> [   18.763219] ata6.00: cmd 60/08:a8:48:2e:59/00:00:01:00:00/40 tag 21 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.764373] ata6.00: status: { DRDY }
> [   18.764954] ata6.00: failed command: READ FPDMA QUEUED
> [   18.765513] ata6.00: cmd 60/08:b0:60:7b:5a/00:00:01:00:00/40 tag 22 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.766665] ata6.00: status: { DRDY }
> [   18.767248] ata6.00: failed command: READ FPDMA QUEUED
> [   18.767825] ata6.00: cmd 60/08:b8:90:63:59/00:00:01:00:00/40 tag 23 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.768956] ata6.00: status: { DRDY }
> [   18.769535] ata6.00: failed command: READ FPDMA QUEUED
> [   18.770118] ata6.00: cmd 60/08:c0:78:01:56/00:00:01:00:00/40 tag 24 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.771271] ata6.00: status: { DRDY }
> [   18.771853] ata6.00: failed command: READ FPDMA QUEUED
> [   18.772409] ata6.00: cmd 60/08:c8:68:7d:5a/00:00:01:00:00/40 tag 25 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.773530] ata6.00: status: { DRDY }
> [   18.774115] ata6.00: failed command: READ FPDMA QUEUED
> [   18.774698] ata6.00: cmd 60/08:d0:38:9c:59/00:00:01:00:00/40 tag 26 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.775833] ata6.00: status: { DRDY }
> [   18.776418] ata6.00: failed command: READ FPDMA QUEUED
> [   18.776999] ata6.00: cmd 60/08:d8:e8:c6:56/00:00:01:00:00/40 tag 27 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.778105] ata6.00: status: { DRDY }
> [   18.778688] ata6.00: failed command: READ FPDMA QUEUED
> [   18.779253] ata6.00: cmd 60/18:e0:f0:a5:59/00:00:01:00:00/40 tag 28 ncq
> 12288 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.780411] ata6.00: status: { DRDY }
> [   18.780998] ata6.00: failed command: READ FPDMA QUEUED
> [   18.781581] ata6.00: cmd 60/08:e8:10:c7:56/00:00:01:00:00/40 tag 29 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.782722] ata6.00: status: { DRDY }
> [   18.783310] ata6.00: failed command: READ FPDMA QUEUED
> [   18.783891] ata6.00: cmd 60/08:f0:18:d4:55/00:00:01:00:00/40 tag 30 ncq
> 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> [   18.785032] ata6.00: status: { DRDY }
> [   18.785620] ata6: hard resetting link
> [   19.506672] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [   19.508673] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [   19.510442] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> succeeded
> [   19.510447] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
> filtered out
> [   19.510449] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
> OVERLAY) filtered out
> [   19.513605] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> succeeded
> [   19.513610] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
> filtered out
> [   19.513612] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
> OVERLAY) filtered out
> [   19.515018] ata6.00: configured for UDMA/133
> [   19.515051] ata6: EH complete
> [   19.516377] ata3.00: configured for UDMA/133
> [   19.519749] ata3: EH complete
> [   44.398628] ata3: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe
> frozen
> [   44.400025] ata3: irq_stat 0x00400040, connection status changed
> [   44.401101] ata3: SError: { HostInt PHYRdyChg 10B8B DevExch }
> [   44.402113] ata3: hard resetting link
> [   44.402122] ata6: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe
> frozen
> [   44.402713] ata6: irq_stat 0x00400040, connection status changed
> [   44.403321] ata6: SError: { HostInt PHYRdyChg 10B8B DevExch }
> [   44.403894] ata6: hard resetting link
> [   45.126222] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [   45.127220] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [   45.128785] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> succeeded
> [   45.128790] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
> filtered out
> [   45.128792] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
> OVERLAY) filtered out
> [   45.131885] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> succeeded
> [   45.131889] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
> filtered out
> [   45.131891] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
> OVERLAY) filtered out
> [   45.132995] ata3.00: configured for UDMA/133
> [   45.133218] ata6.00: configured for UDMA/133
> [   45.133221] ata6: EH complete
> [   45.133672] ata3: EH complete
> [  190.709673] ata6: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe
> frozen
> [  190.711097] ata6: irq_stat 0x00400040, connection status changed
> [  190.712264] ata6: SError: { HostInt PHYRdyChg 10B8B DevExch }
> [  190.713302] ata6: hard resetting link
> [  190.713320] ata3: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe
> frozen
> [  190.713900] ata3: irq_stat 0x00400040, connection status changed
> [  190.714523] ata3: SError: { HostInt PHYRdyChg 10B8B DevExch }
> [  190.715181] ata3: hard resetting link
> [  191.437594] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [  191.438545] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [  191.439004] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> succeeded
> [  191.439008] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
> filtered out
> [  191.439010] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
> OVERLAY) filtered out
> [  191.441546] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> succeeded
> [  191.441549] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
> filtered out
> [  191.441550] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
> OVERLAY) filtered out
> [  191.442668] ata6.00: configured for UDMA/133
> [  191.442672] ata6: EH complete
> [  191.445565] ata3.00: configured for UDMA/133
> [  191.448998] ata3: EH complete
> [  434.291210] ata6: limiting SATA link speed to 3.0 Gbps
> [  434.291215] ata6: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe
> frozen
> [  434.292632] ata6: irq_stat 0x00400040, connection status changed
> [  434.293753] ata6: SError: { HostInt PHYRdyChg 10B8B DevExch }
> [  434.294781] ata6: hard resetting link
> [  434.294794] ata3: limiting SATA link speed to 1.5 Gbps
> [  434.294797] ata3: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe
> frozen
> [  434.295403] ata3: irq_stat 0x00400040, connection status changed
> [  434.295998] ata3: SError: { HostInt PHYRdyChg 10B8B DevExch }
> [  434.296578] ata3: hard resetting link
> [  435.018975] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [  435.020217] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [  435.020427] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> succeeded
> [  435.020431] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
> filtered out
> [  435.020433] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
> OVERLAY) filtered out
> [  435.023239] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
> succeeded
> [  435.023243] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
> filtered out
> [  435.023245] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
> OVERLAY) filtered out
> [  435.024360] ata6.00: configured for UDMA/133
> [  435.024363] ata6: EH complete
> [  435.027084] ata3.00: configured for UDMA/133
> [  435.030526] ata3: EH complete
> 
>  smartctl -l error  /dev/sda:
> 
> smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11.10-301.fc20.x86_64] (local
> build)
> Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
> 
> === START OF READ SMART DATA SECTION ===
> SMART Error Log Version: 1
> ATA Error Count: 4
> 	CR = Command Register [HEX]
> 	FR = Features Register [HEX]
> 	SC = Sector Count Register [HEX]
> 	SN = Sector Number Register [HEX]
> 	CL = Cylinder Low Register [HEX]
> 	CH = Cylinder High Register [HEX]
> 	DH = Device/Head Register [HEX]
> 	DC = Device Command Register [HEX]
> 	ER = Error register [HEX]
> 	ST = Status register [HEX]
> Powered_Up_Time is measured from power on, and printed as
> DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
> SS=sec, and sss=millisec. It "wraps" after 49.710 days.
> 
> Error 4 occurred at disk power-on lifetime: 88 hours (3 days + 16 hours)
>   When the command that caused the error occurred, the device was active or
> idle.
> 
>   After command completion occurred, registers were:
>   ER ST SC SN CL CH DH
>   -- -- -- -- -- -- --
>   84 51 14 0c 90 3a 01  Error: ICRC, ABRT at LBA = 0x013a900c = 20615180
> 
>   Commands leading to the command that caused the error were:
>   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>   -- -- -- -- -- -- -- --  ----------------  --------------------
>   61 00 08 20 8e 3a 40 00      01:38:03.590  WRITE FPDMA QUEUED
>   61 00 00 20 8e 1a 40 00      01:38:03.590  WRITE FPDMA QUEUED
>   61 00 00 20 67 6a 40 00      01:38:03.588  WRITE FPDMA QUEUED
>   61 00 00 b0 4b 6a 40 00      01:38:03.586  WRITE FPDMA QUEUED
>   60 80 00 00 dc 22 40 00      01:38:03.585  READ FPDMA QUEUED
> 
> Error 3 occurred at disk power-on lifetime: 87 hours (3 days + 15 hours)
>   When the command that caused the error occurred, the device was active or
> idle.
> 
>   After command completion occurred, registers were:
>   ER ST SC SN CL CH DH
>   -- -- -- -- -- -- --
>   84 51 c1 7f 7c 16 01  Error: ICRC, ABRT at LBA = 0x01167c7f = 18250879
> 
>   Commands leading to the command that caused the error were:
>   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>   -- -- -- -- -- -- -- --  ----------------  --------------------
>   61 a0 88 a0 7b 36 40 00      01:00:37.557  WRITE FPDMA QUEUED
>   61 40 80 40 7b 36 40 00      01:00:37.557  WRITE FPDMA QUEUED
>   61 20 78 00 7b 36 40 00      01:00:37.557  WRITE FPDMA QUEUED
>   61 40 70 00 7a 36 40 00      01:00:37.557  WRITE FPDMA QUEUED
>   61 40 68 a0 79 36 40 00      01:00:37.557  WRITE FPDMA QUEUED
> 
> Error 2 occurred at disk power-on lifetime: 44 hours (1 days + 20 hours)
>   When the command that caused the error occurred, the device was active or
> idle.
> 
>   After command completion occurred, registers were:
>   ER ST SC SN CL CH DH
>   -- -- -- -- -- -- --
>   84 51 c8 38 67 22 0d  Error: ICRC, ABRT at LBA = 0x0d226738 = 220358456
> 
>   Commands leading to the command that caused the error were:
>   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>   -- -- -- -- -- -- -- --  ----------------  --------------------
>   61 20 00 c0 ec 1c 40 00      02:09:27.002  WRITE FPDMA QUEUED
>   61 b8 d8 00 6c 22 40 00      02:09:26.991  WRITE FPDMA QUEUED
>   61 00 d0 00 68 22 40 00      02:09:26.991  WRITE FPDMA QUEUED
>   61 00 c8 00 64 22 40 00      02:09:26.991  WRITE FPDMA QUEUED
>   61 00 c0 00 60 22 40 00      02:09:26.990  WRITE FPDMA QUEUED
> 
> Error 1 occurred at disk power-on lifetime: 20 hours (0 days + 20 hours)
>   When the command that caused the error occurred, the device was active or
> idle.
> 
>   After command completion occurred, registers were:
>   ER ST SC SN CL CH DH
>   -- -- -- -- -- -- --
>   84 51 71 8f 0b 17 0c  Error: ICRC, ABRT at LBA = 0x0c170b8f = 202836879
> 
>   Commands leading to the command that caused the error were:
>   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>   -- -- -- -- -- -- -- --  ----------------  --------------------
>   61 00 00 00 09 17 40 00      00:27:29.750  WRITE FPDMA QUEUED
>   61 00 18 00 05 17 40 00      00:27:29.419  WRITE FPDMA QUEUED
>   61 00 10 00 01 17 40 00      00:27:29.419  WRITE FPDMA QUEUED
>   61 00 08 00 fd 16 40 00      00:27:29.419  WRITE FPDMA QUEUED
>   61 00 00 00 f9 16 40 00      00:27:29.418  WRITE FPDMA QUEUED
> 
> When using linux rescue:
> 
> sometime,terminal show:
> 
> ata6.00: failed command: READ FPDMA QUEUED
> ata6.00: cmd 60/08:f0:18:d4:55/00:00:01:00:00/40 tag 30 ncq 4096 in
>          res 50/00:08:e0:7e:5a/00:00:01:00:00/40 Emask 0x50 (ATA bus error)
> ata6.00: status: { DRDY }
> 
> Always,terminal show:
> 
> ata3: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
> ata3: irq_stat 0x00400040, connection status changed
> ata3: SError: { HostInt PHYRdyChg 10B8B DevExch }
> ata6: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
> ata6: irq_stat 0x00400040, connection status changed
> ata6: SError: { HostInt PHYRdyChg 10B8B DevExch }

now,new error:
Mar 26 14:49:15 chenhao-book kernel: [  151.145060] ata1: drained 65536 bytes to clear DRQ
Mar 26 14:49:15 chenhao-book kernel: [  151.145084] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Mar 26 14:49:15 chenhao-book kernel: [  151.145087] ata1.01: ST_FIRST: DRQ=1 with device error, dev_stat 0x7F
Mar 26 14:49:15 chenhao-book kernel: [  151.145091] sr 0:0:1:0: CDB: 
Mar 26 14:49:15 chenhao-book kernel: [  151.145092] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
Mar 26 14:49:15 chenhao-book kernel: [  151.145098] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
Mar 26 14:49:15 chenhao-book kernel: [  151.145098]          res 7f/ff:ff:ff:ff:ff/00:00:00:00:00/ff Emask 0x2 (HSM violation)
Mar 26 14:49:15 chenhao-book kernel: [  151.145099] ata1.01: status: { DRDY DF DRQ ERR }
Mar 26 14:49:15 chenhao-book kernel: [  151.145106] ata1: soft resetting link
Mar 26 14:49:16 chenhao-book kernel: [  151.431863] ata1.01: configured for UDMA/133
Mar 26 14:49:16 chenhao-book kernel: [  151.433694] ata1: EH complete
Mar 26 14:49:24 chenhao-book kernel: [  159.847650] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Mar 26 14:49:24 chenhao-book kernel: [  159.847655] ata4.00: failed command: WRITE DMA EXT
Mar 26 14:49:24 chenhao-book kernel: [  159.847659] ata4.00: cmd 35/00:08:a0:44:13/00:00:42:00:00/e0 tag 0 dma 4096 out
Mar 26 14:49:24 chenhao-book kernel: [  159.847659]          res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
Mar 26 14:49:24 chenhao-book kernel: [  159.847661] ata4.00: status: { DRDY }
Mar 26 14:49:28 chenhao-book kernel: [  163.948409] ata1: drained 65536 bytes to clear DRQ
Mar 26 14:49:28 chenhao-book kernel: [  163.948433] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Mar 26 14:49:28 chenhao-book kernel: [  163.948435] ata1.01: ST_FIRST: DRQ=1 with device error, dev_stat 0x7F
Mar 26 14:49:28 chenhao-book kernel: [  163.948439] sr 0:0:1:0: CDB: 
Mar 26 14:49:28 chenhao-book kernel: [  163.948440] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
Mar 26 14:49:28 chenhao-book kernel: [  163.948446] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
Mar 26 14:49:28 chenhao-book kernel: [  163.948446]          res 7f/ff:ff:ff:ff:ff/00:00:00:00:00/ff Emask 0x2 (HSM violation)
Mar 26 14:49:28 chenhao-book kernel: [  163.948448] ata1.01: status: { DRDY DF DRQ ERR }
Mar 26 14:49:28 chenhao-book kernel: [  163.948455] ata1: soft resetting link
Mar 26 14:49:28 chenhao-book kernel: [  164.251803] ata1.01: configured for UDMA/133
Mar 26 14:49:28 chenhao-book kernel: [  164.253630] ata1: EH complete
Mar 26 14:49:29 chenhao-book kernel: [  164.887821] ata4: link is slow to respond, please be patient (ready=0)
Mar 26 14:49:34 chenhao-book kernel: [  169.873363] ata4: device not ready (errno=-16), forcing hardreset
Mar 26 14:49:34 chenhao-book kernel: [  169.873371] ata4: soft resetting link
Mar 26 14:49:34 chenhao-book kernel: [  170.153779] ata4.00: configured for UDMA/133
Mar 26 14:49:34 chenhao-book kernel: [  170.153785] ata4.00: device reported invalid CHS sector 0
Mar 26 14:49:34 chenhao-book kernel: [  170.153792] ata4: EH complete
Mar 26 14:49:43 chenhao-book kernel: [  178.801206] ata1: drained 65536 bytes to clear DRQ
Mar 26 14:49:43 chenhao-book kernel: [  178.801230] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Mar 26 14:49:43 chenhao-book kernel: [  178.801232] ata1.01: ST_FIRST: DRQ=1 with device error, dev_stat 0x7F
Mar 26 14:49:43 chenhao-book kernel: [  178.801236] sr 0:0:1:0: CDB: 
Mar 26 14:49:43 chenhao-book kernel: [  178.801237] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
Mar 26 14:49:43 chenhao-book kernel: [  178.801243] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
Mar 26 14:49:43 chenhao-book kernel: [  178.801243]          res 7f/ff:ff:ff:ff:ff/00:00:00:00:00/ff Emask 0x2 (HSM violation)
Mar 26 14:49:43 chenhao-book kernel: [  178.801244] ata1.01: status: { DRDY DF DRQ ERR }
Mar 26 14:49:43 chenhao-book kernel: [  178.801252] ata1: soft resetting link
Mar 26 14:49:43 chenhao-book kernel: [  179.088367] ata1.01: configured for UDMA/133
Mar 26 14:49:43 chenhao-book kernel: [  179.090311] ata1: EH complete
Mar 26 14:49:45 chenhao-book kernel: [  181.361810] ata1: drained 65536 bytes to clear DRQ
Mar 26 14:49:45 chenhao-book kernel: [  181.361834] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Mar 26 14:49:45 chenhao-book kernel: [  181.361835] ata1.01: ST_FIRST: DRQ=1 with device error, dev_stat 0x7F
Mar 26 14:49:45 chenhao-book kernel: [  181.361850] sr 0:0:1:0: CDB: 
Mar 26 14:49:45 chenhao-book kernel: [  181.361852] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
Mar 26 14:49:45 chenhao-book kernel: [  181.361859] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
Mar 26 14:49:45 chenhao-book kernel: [  181.361859]          res 7f/ff:ff:ff:ff:ff/00:00:00:00:00/ff Emask 0x2 (HSM violation)
Mar 26 14:49:45 chenhao-book kernel: [  181.361860] ata1.01: status: { DRDY DF DRQ ERR }
Mar 26 14:49:45 chenhao-book kernel: [  181.361868] ata1: soft resetting link
Mar 26 14:49:46 chenhao-book kernel: [  181.649146] ata1.01: configured for UDMA/133
Mar 26 14:49:46 chenhao-book kernel: [  181.651039] ata1: EH complete
Mar 26 14:49:54 chenhao-book kernel: [  190.068853] ata1: drained 65536 bytes to clear DRQ
Mar 26 14:49:54 chenhao-book kernel: [  190.068875] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Mar 26 14:49:54 chenhao-book kernel: [  190.068877] ata1.01: ST_FIRST: DRQ=1 with device error, dev_stat 0x7F
Mar 26 14:49:54 chenhao-book kernel: [  190.068880] sr 0:0:1:0: CDB: 
Mar 26 14:49:54 chenhao-book kernel: [  190.068883] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
Mar 26 14:49:54 chenhao-book kernel: [  190.068890] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
Mar 26 14:49:54 chenhao-book kernel: [  190.068890]          res 7f/ff:ff:ff:ff:ff/00:00:00:00:00/ff Emask 0x2 (HSM violation)
Mar 26 14:49:54 chenhao-book kernel: [  190.068892] ata1.01: status: { DRDY DF DRQ ERR }
Mar 26 14:49:54 chenhao-book kernel: [  190.068899] ata1: soft resetting link
Mar 26 14:49:54 chenhao-book kernel: [  190.371839] ata1.01: configured for UDMA/133
Mar 26 14:49:54 chenhao-book kernel: [  190.373749] ata1: EH complete
Mar 26 14:50:01 chenhao-book kernel: [  196.726467] ata1: drained 65536 bytes to clear DRQ
Mar 26 14:50:01 chenhao-book kernel: [  196.726482] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Mar 26 14:50:01 chenhao-book kernel: [  196.726484] ata1.01: ST_FIRST: DRQ=1 with device error, dev_stat 0x7F
Mar 26 14:50:01 chenhao-book kernel: [  196.726488] sr 0:0:1:0: CDB: 
Mar 26 14:50:01 chenhao-book kernel: [  196.726489] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
Mar 26 14:50:01 chenhao-book kernel: [  196.726496] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
Mar 26 14:50:01 chenhao-book kernel: [  196.726496]          res 7f/ff:ff:ff:ff:ff/00:00:00:00:00/ff Emask 0x2 (HSM violation)
Mar 26 14:50:01 chenhao-book kernel: [  196.726498] ata1.01: status: { DRDY DF DRQ ERR }
Mar 26 14:50:01 chenhao-book kernel: [  196.726516] ata1: soft resetting link
Mar 26 14:50:01 chenhao-book kernel: [  197.029913] ata1.01: configured for UDMA/133
Mar 26 14:50:01 chenhao-book kernel: [  197.035879] ata1: EH complete
Mar 26 14:50:09 chenhao-book kernel: [  205.433529] ata1: drained 65536 bytes to clear DRQ
Mar 26 14:50:09 chenhao-book kernel: [  205.433555] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Mar 26 14:50:09 chenhao-book kernel: [  205.433557] ata1.01: ST_FIRST: DRQ=1 with device error, dev_stat 0x7F
Mar 26 14:50:09 chenhao-book kernel: [  205.433562] sr 0:0:1:0: CDB: 
Mar 26 14:50:09 chenhao-book kernel: [  205.433563] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
Mar 26 14:50:09 chenhao-book kernel: [  205.433569] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
Mar 26 14:50:09 chenhao-book kernel: [  205.433569]          res 7f/ff:ff:ff:ff:ff/00:00:00:00:00/ff Emask 0x2 (HSM violation)
Mar 26 14:50:09 chenhao-book kernel: [  205.433571] ata1.01: status: { DRDY DF DRQ ERR }
Mar 26 14:50:09 chenhao-book kernel: [  205.433577] ata1: soft resetting link
Mar 26 14:50:10 chenhao-book kernel: [  205.720557] ata1.01: configured for UDMA/133
Mar 26 14:50:10 chenhao-book kernel: [  205.728155] ata1: EH complete
Mar 26 14:50:12 chenhao-book kernel: [  207.993986] ata1: drained 65536 bytes to clear DRQ
Mar 26 14:50:12 chenhao-book kernel: [  207.994008] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Mar 26 14:50:12 chenhao-book kernel: [  207.994010] ata1.01: ST_FIRST: DRQ=1 with device error, dev_stat 0x7F
Mar 26 14:50:12 chenhao-book kernel: [  207.994014] sr 0:0:1:0: CDB: 
Mar 26 14:50:12 chenhao-book kernel: [  207.994016] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
Mar 26 14:50:12 chenhao-book kernel: [  207.994022] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
Mar 26 14:50:12 chenhao-book kernel: [  207.994022]          res 7f/ff:ff:ff:ff:ff/00:00:00:00:00/ff Emask 0x2 (HSM violation)
Mar 26 14:50:12 chenhao-book kernel: [  207.994024] ata1.01: status: { DRDY DF DRQ ERR }
Mar 26 14:50:12 chenhao-book kernel: [  207.994030] ata1: soft resetting link
Mar 26 14:50:12 chenhao-book kernel: [  208.281344] ata1.01: configured for UDMA/133
Mar 26 14:50:12 chenhao-book kernel: [  208.288253] ata1: EH complete
Mar 26 14:50:13 chenhao-book kernel: [  208.821641] ata4.00: limiting speed to UDMA/100:PIO4
Mar 26 14:50:13 chenhao-book kernel: [  208.821646] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Mar 26 14:50:13 chenhao-book kernel: [  208.821649] ata4.00: failed command: WRITE DMA EXT
Mar 26 14:50:13 chenhao-book kernel: [  208.821653] ata4.00: cmd 35/00:58:18:51:93/00:00:39:00:00/e0 tag 0 dma 45056 out
Mar 26 14:50:13 chenhao-book kernel: [  208.821653]          res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
Mar 26 14:50:13 chenhao-book kernel: [  208.821655] ata4.00: status: { DRDY }
Mar 26 14:50:18 chenhao-book kernel: [  213.862893] ata4: link is slow to respond, please be patient (ready=0)
Mar 26 14:50:23 chenhao-book kernel: [  218.749354] ata1: drained 65536 bytes to clear DRQ
Mar 26 14:50:23 chenhao-book kernel: [  218.749379] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Mar 26 14:50:23 chenhao-book kernel: [  218.749380] ata1.01: ST_FIRST: DRQ=1 with device error, dev_stat 0x7F
Mar 26 14:50:23 chenhao-book kernel: [  218.749383] sr 0:0:1:0: CDB: 
Mar 26 14:50:23 chenhao-book kernel: [  218.749386] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
Mar 26 14:50:23 chenhao-book kernel: [  218.749392] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
Mar 26 14:50:23 chenhao-book kernel: [  218.749392]          res 7f/ff:ff:ff:ff:ff/00:00:00:00:00/ff Emask 0x2 (HSM violation)
Mar 26 14:50:23 chenhao-book kernel: [  218.749394] ata1.01: status: { DRDY DF DRQ ERR }
Mar 26 14:50:23 chenhao-book kernel: [  218.749400] ata1: soft resetting link
Mar 26 14:50:23 chenhao-book kernel: [  218.849791] ata4: device not ready (errno=-16), forcing hardreset
Mar 26 14:50:23 chenhao-book kernel: [  218.849801] ata4: soft resetting link
Mar 26 14:50:23 chenhao-book kernel: [  219.036654] ata1.01: configured for UDMA/133
Mar 26 14:50:23 chenhao-book kernel: [  219.044519] ata1: EH complete
Mar 26 14:50:23 chenhao-book kernel: [  219.128831] ata4.00: configured for UDMA/100
Mar 26 14:50:23 chenhao-book kernel: [  219.128838] ata4.00: device reported invalid CHS sector 0
Mar 26 14:50:23 chenhao-book kernel: [  219.128846] ata4: EH complete

I got new message from ASUS Inc. They said "intel power save model" made it and have no idea to solve the problem.

This message is a reminder that Fedora 20 is nearing its end of life.
Approximately 4 (four) weeks from now Fedora will stop maintaining
and issuing updates for Fedora 20. It is Fedora's policy to close all
bug reports from releases that are no longer maintained. At that time
this bug will be closed as EOL if it remains open with a Fedora  'version'
of '20'.

Package Maintainer: If you wish for this bug to remain open because you
plan to fix it in a currently maintained version, simply change the 'version' 
to a later Fedora version.

Thank you for reporting this issue and we are sorry that we were not 
able to fix it before Fedora 20 is end of life. If you would still like 
to see this bug fixed and are able to reproduce it against a later version 
of Fedora, you are encouraged  change the 'version' to a later Fedora 
version prior this bug is closed as described in the policy above.

Although we aim to fix as many bugs as possible during every release's 
lifetime, sometimes those efforts are overtaken by events. Often a 
more recent Fedora release includes newer upstream software that fixes 
bugs or makes them obsolete.

Fedora 20 changed to end-of-life (EOL) status on 2015-06-23. Fedora 20 is
no longer maintained, which means that it will not receive any further
security or bug fix updates. As a result we are closing this bug.

If you can reproduce this bug against a currently maintained version of
Fedora please feel free to reopen this bug against that version. If you
are unable to reopen this bug, please file a new report against the
current release. If you experience problems, please add a comment to this
bug.

Thank you for reporting this bug and we are sorry it could not be fixed.