Description of problem:
ipsec auto --up <connection> doesn't work properly when it's used with connection_name like: ipsec auto --ready MyConnection. ipsec auto --ready without any other parameter seems doesn't work also.


Version-Release number of selected component (if applicable):
openswan-2.6.32-27.4.el6_5
libreswan-3.8-5.el7

How reproducible:
Always

Steps to Reproduce:
1. Config files:
cat <<EOF >/etc/ipsec.conf
version 2.0

config setup
	crlcheckinterval="180"
	strictcrlpolicy=no
	protostack=netkey
	interfaces=%defaultroute
	plutodebug=all

conn connA
	connaddrfamily=ipv4
	phase2=esp
	ike=aes-md5
	phase2alg=aes-sha1
	authby=secret
	left=127.0.0.1
	right=127.0.0.1
	loopback=yes
	auto=add

conn connB
	connaddrfamily=ipv4
	phase2=esp
	ike=3des-md5;modp2048
	phase2alg=aes-sha1
	authby=secret
	left=127.0.0.1
	right=127.0.0.1
	loopback=yes
	auto=add

conn connC
	connaddrfamily=ipv4
	phase2=esp
	ike=3des-sha1
	phase2alg=3des-md5
	authby=secret
	left=127.0.0.1
	right=127.0.0.1
	loopback=yes
	auto=add

conn connD
	connaddrfamily=ipv4
	phase2=esp
	ike=aes-sha1;dh22
	phase2alg=aes-sha1;dh22
	authby=secret
	left=127.0.0.1
	right=127.0.0.1
	loopback=yes
	auto=add

conn connE
	connaddrfamily=ipv4
	phase2=esp
	ike=aes-sha1;dh23
	phase2alg=aes-sha1;dh23
	authby=secret
	left=127.0.0.1
	right=127.0.0.1
	loopback=yes
	auto=add

conn connF
	connaddrfamily=ipv4
	phase2=esp
	ike=aes-sha1;dh24
	phase2alg=aes-sha1;dh24
	authby=secret
	left=127.0.0.1
	right=127.0.0.1
	loopback=yes
	auto=add

EOF
echo ': PSK "RedHat"' >/etc/ipsec.secrets

2. service ipsec restart; ipsec auto --ready connF; echo ">>> 1st try <<<"; ipsec auto --up connF; ipsec auto --status | grep -q 'connF.*STATE_MAIN_I4.*ISAKMP SA established' || { sleep 3; echo ">>> 2nd try <<<"; ipsec auto --up connF; } ; service ipsec stop

3. service ipsec restart; ipsec auto --ready; echo ">>> 1st try <<<"; ipsec auto --up connF; ipsec auto --status | grep -q 'connF.*STATE_MAIN_I4.*ISAKMP SA established' || { sleep 3; echo ">>> 2nd try <<<"; ipsec auto --up connF; } ; service ipsec stop

Actual results:
2.
Redirecting to /bin/systemctl restart  ipsec.service
Usage:
	ipsec auto [--showonly] [--asynchronous] --up connectionname
	ipsec auto [--showonly] --{add|delete|replace|down} connectionname
	ipsec auto [--showonly] --{route|unroute} connectionname
	ipsec auto [--showonly] --{ready|status|rereadsecrets|rereadgroups}
        ipsec auto [--showonly] --{rereadcacerts|rereadaacerts}
        ipsec auto [--showonly] --{rereadacerts|rereadcrls|rereadall}
        ipsec auto [--showonly] [--utc] --{listpubkeys|listcerts}
        ipsec auto [--showonly] [--utc] --checkpubkeys
        ipsec auto [--showonly] [--utc] --{listcacerts|listaacerts}
        ipsec auto [--showonly] [--utc] --{listacerts|listgroups}
        ipsec auto [--showonly] [--utc] --{listcrls|listall}

	other options: [--config ipsecconfigfile] [--verbose] [--show]
>>> 1st try <<<
000 initiating all conns with alias='connF' 
021 no connection named "connF"
>>> 2nd try <<<
104 "connF" #1: STATE_MAIN_I1: initiate
003 "connF" #1: received Vendor ID payload [Dead Peer Detection]
003 "connF" #1: received Vendor ID payload [FRAGMENTATION]
106 "connF" #1: STATE_MAIN_I2: sent MI2, expecting MR2
108 "connF" #1: STATE_MAIN_I3: sent MI3, expecting MR3
003 "connF" #1: received Vendor ID payload [CAN-IKEv2]
004 "connF" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_128 prf=oakley_sha group=modp2048}
117 "connF" #3: STATE_QUICK_I1: initiate
004 "connF" #3: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP=>0x351063fa <0x0cf36604 xfrm=AES_256-HMAC_SHA1 NATOA=none NATD=none DPD=none}
Redirecting to /bin/systemctl stop  ipsec.service

3.
Redirecting to /bin/systemctl restart  ipsec.service
>>> 1st try <<<
000 initiating all conns with alias='connF' 
021 no connection named "connF"
>>> 2nd try <<<
104 "connF" #1: STATE_MAIN_I1: initiate
003 "connF" #1: received Vendor ID payload [Dead Peer Detection]
003 "connF" #1: received Vendor ID payload [FRAGMENTATION]
106 "connF" #1: STATE_MAIN_I2: sent MI2, expecting MR2
108 "connF" #1: STATE_MAIN_I3: sent MI3, expecting MR3
003 "connF" #1: received Vendor ID payload [CAN-IKEv2]
004 "connF" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_128 prf=oakley_sha group=modp2048}
117 "connF" #3: STATE_QUICK_I1: initiate
004 "connF" #3: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP=>0xdadb5fc1 <0x9dbc6297 xfrm=AES_256-HMAC_SHA1 NATOA=none NATD=none DPD=none}
Redirecting to /bin/systemctl stop  ipsec.service


Expected results:
"ipsec auto --ready <connection>" works


Additional info:
Is there any other way how to know that whole config has been parsed?