Description virt-v2v fail to convert guest with virtio lun disk Version: libguestfs-1.27.62-1.1.el7.x86_64 virt-v2v-1.27.62-1.1.el7.x86_64 How reproducible: 100% Steps to Reproduce: 1.Prepare a guest with virtio lun disk. # virsh dumpxml virtio-lun <disk type='block' device='lun'> <driver name='qemu' type='raw'/> <source dev='/dev/sdi'/> <target dev='vda' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </disk> 2.Use virt-v2v to convert the above guest. # virt-v2v -o rhev -os 10.66.90.115:/vol/v2v_auto/nfs_export -n rhevm virtio-lun [ 0.0] Opening the source -i libvirt virtio-lun virt-v2v: error: this guest has no non-removable disks If reporting bugs, run virt-v2v with debugging enabled and include the complete output: virt-v2v -v -x [...] Actual results： virt-v2v fail to convert guest with virtio lun disk Expected results: Guest with virtio lun disk can be converted by virt-v2v successfully. Additional info:
Since old virt-v2v also ignored type='lun', this is a new feature so I am moving it to RHEL 7.2.
I found that if one guest has two different type disks,which with below xml: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/tmp/esx6.0-rhel7.5-x86_64-sda'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </disk> <disk type='block' device='lun'> <driver name='qemu' type='raw'/> <source dev='/dev/disk/by-path/ip-10.73.194.15:3260-iscsi- iqn.2001-05.com.equallogic:0-8a0906-8771f7d03-573263eebf54d2c2-s1-rwu-v2v-libvirt-lun-0'/> <target dev='sda' bus='scsi'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> Virt-v2v can convert it with no error.But check the new guest xml,I found that only convert one disk. <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='volume' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source pool='default' volume='testlun-sda'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> So,should virt-v2v give a warning during the conversion?