Created attachment 958050 [details] Dracut Report Description of problem: Unable to boot fedora 20 live from USB 3.0 device: Bus 001 Device 024: ID 0951:1666 Kingston Technology Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0951 Kingston Technology idProduct 0x1??? bcdDevice 1.00 iManufacturer 1 Kingston iProduct 2 DataTraveler 3.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 498mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 22 bNumDeviceCaps 2 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000002 Link Power Management (LPM) Supported SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 2 Lowest fully-functional device speed is High Speed (480Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 2047 micro seconds Device Status: 0x0000 (Bus Powered) Version-Release number of selected component (if applicable): How reproducible: Steps to Reproduce: 1. Create a fedora 20 live usb using liveusb-creator on an USB 3.0 device 2. Boot from that USB 3.0 device 3. Actual results: Fedora does not boot. Attached bug report Expected results: Fedora booting from USB 3.0 device Additional info:
[ 11.042640] localhost kernel: sdc: sdc1 [ 11.046265] localhost kernel: sd 3:0:0:0: [sdc] No Caching mode page found [ 11.046280] localhost kernel: sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 11.046292] localhost kernel: sd 3:0:0:0: [sdc] Attached SCSI removable disk blkid /dev/sdc1: LABEL="WALDYD" UUID="81DC-55C7" TYPE="vfat" PARTUUID="8188c90b-01" cat /proc/cmdline initrd=initrd0.img root=live:CDLABEL=LIVE rootfstype=vfat rw rd.live.image rd.live.overlay=LABEL=LIVE quiet rhgb rd.luks=0 rd.md=0 rd.dm=0 BOOT_IMAGE=vmlinuz0 So, the kernel command line specifies, that it should search for a "/dev/disk/by-label/LIVE", which apparently does not exist, because the USB stick has LABEL="WALDYD". So, either you changed the LABEL of the USB stick after using liveusb-creator. Or liveusb-creator is buggy. Reassigning to liveusb-creator.
liveusb-creator-3.13.1-1.el7 has been submitted as an update for Fedora EPEL 7. https://admin.fedoraproject.org/updates/liveusb-creator-3.13.1-1.el7
liveusb-creator-3.13.1-1.el6 has been submitted as an update for Fedora EPEL 6. https://admin.fedoraproject.org/updates/liveusb-creator-3.13.1-1.el6
liveusb-creator-3.13.1-1.fc19 has been submitted as an update for Fedora 19. https://admin.fedoraproject.org/updates/liveusb-creator-3.13.1-1.fc19
liveusb-creator-3.13.1-1.fc21 has been submitted as an update for Fedora 21. https://admin.fedoraproject.org/updates/liveusb-creator-3.13.1-1.fc21
liveusb-creator-3.13.1-1.fc20 has been submitted as an update for Fedora 20. https://admin.fedoraproject.org/updates/liveusb-creator-3.13.1-1.fc20
Package liveusb-creator-3.13.1-1.fc21: * should fix your issue, * was pushed to the Fedora 21 testing repository, * should be available at your local mirror within two days. Update it with: # su -c 'yum update --enablerepo=updates-testing liveusb-creator-3.13.1-1.fc21' as soon as you are able to. Please go to the following url: https://admin.fedoraproject.org/updates/FEDORA-2014-15869/liveusb-creator-3.13.1-1.fc21 then log in and leave karma (feedback).
liveusb-creator-3.13.1-1.fc21 has been pushed to the Fedora 21 stable repository. If problems still persist, please make note of it in this bug report.
liveusb-creator-3.13.2-1.el6 has been submitted as an update for Fedora EPEL 6. https://admin.fedoraproject.org/updates/liveusb-creator-3.13.2-1.el6
liveusb-creator-3.13.2-1.fc20 has been submitted as an update for Fedora 20. https://admin.fedoraproject.org/updates/liveusb-creator-3.13.2-1.fc20
liveusb-creator-3.13.2-1.fc19 has been submitted as an update for Fedora 19. https://admin.fedoraproject.org/updates/liveusb-creator-3.13.2-1.fc19
liveusb-creator-3.13.2-1.fc21 has been submitted as an update for Fedora 21. https://admin.fedoraproject.org/updates/liveusb-creator-3.13.2-1.fc21
liveusb-creator-3.13.2-1.el6 has been pushed to the Fedora EPEL 6 stable repository. If problems still persist, please make note of it in this bug report.
liveusb-creator-3.13.2-1.fc20 has been pushed to the Fedora 20 stable repository. If problems still persist, please make note of it in this bug report.
liveusb-creator-3.13.2-1.fc21 has been pushed to the Fedora 21 stable repository. If problems still persist, please make note of it in this bug report.
liveusb-creator-3.13.2-1.fc19 has been pushed to the Fedora 19 stable repository. If problems still persist, please make note of it in this bug report.