Created attachment 984131 [details]
log files

Description of problem:
It should not list the single path disk in "#multipath -ll" command after register to rhevm.

Version-Release number of selected component (if applicable):
rhev-hypervisor6-6.6-20150123.0.iso
ovirt-node-3.0.1-19.el6.27.noarch

How reproducible:
100%

Steps to Reproduce:
1. TUI install rhev-hypervisor6-6.6-20150123.0.iso
2. Check the output of "#multipath -ll"
3. Register to rhevm3.4
4. Check the output of "#multipath -ll"

Actual results:
1. After step2, the output is as follows.
# multipath -ll
Jan 26 07:30:24 | multipath.conf line 4, duplicate keyword: getuid_callout

2. After step4, the output is as follows. 
# multipath -ll
360050763008084e6e00000000000000b dm-7 IBM,2145
size=50G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=10 status=active
  `- 0:0:0:3 sdd 8:48 active ready running
360050763008084e6e00000000000000a dm-6 IBM,2145
size=40G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=50 status=active
  `- 0:0:0:2 sdc 8:32 active ready running
360050763008084e6e000000000000009 dm-5 IBM,2145
size=30G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=10 status=active
  `- 0:0:0:1 sdb 8:16 active ready running

# lsblk 
NAME                      MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINT
loop0                       7:0    0 159.9M  1 loop  
loop1                       7:1    0   1.5G  1 loop  
└─live-rw (dm-0)          253:0    0   1.5G  0 dm    /
loop2                       7:2    0   512M  0 loop  
└─live-rw (dm-0)          253:0    0   1.5G  0 dm    /
sda                         8:0    0    20G  0 disk  
├─sda1                      8:1    0   243M  0 part  
├─sda2                      8:2    0   244M  0 part  
├─sda3                      8:3    0   244M  0 part  /dev/.initramfs/live
└─sda4                      8:4    0  19.3G  0 part  
  ├─HostVG-Swap (dm-1)    253:1    0   9.8G  0 lvm   [SWAP]
  ├─HostVG-Config (dm-2)  253:2    0     8M  0 lvm   /config
  ├─HostVG-Logging (dm-3) 253:3    0     2G  0 lvm   /var/log
  └─HostVG-Data (dm-4)    253:4    0   7.4G  0 lvm   /data
sdb                         8:16   0    30G  0 disk  
└─360050763008084e6e000000000000009 (dm-5)
                          253:5    0    30G  0 mpath 
sdc                         8:32   0    40G  0 disk  
└─360050763008084e6e00000000000000a (dm-6)
                          253:6    0    40G  0 mpath 
sdd                         8:48   0    50G  0 disk  
└─360050763008084e6e00000000000000b (dm-7)
                          253:7    0    50G  0 mpath 

Expected results:
1. It should keep the same output before and after register to rhevm in rhevh. So it should not list the single path after register to rhevm also. 

Additional info: