Description of problem: Sometimes, the sound is lost on my chromebook Acer C720P. The sound output becomes "dummy output". Version-Release number of selected component (if applicable): F21 How reproducible: I have not found yet a reproducible sequence but it happens quite often (~once per day). It seems to happen after a wake up from suspend but it is not systematic. Steps to Reproduce: 1. 2. 3. Actual results: There is no sound. Expected results: Sound should work. Additional info:
In my experience, problems as you describe (sound gone after resume) are usually kernel/driver related. Can you attach the output from 'alsa-info' ?
This is the output of alsa-info. Note that the sound _is_ working at the moment. ------------------------------------------------- [sandrine@localhost ~]$ alsa-info ALSA Information Script v 0.4.62 -------------------------------- This script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware. dmesg lspci lsmod aplay amixer alsactl /proc/asound/ /sys/class/sound/ ~/.asoundrc (etc.) See '/usr/bin/alsa-info --help' for command line options. Newer version detected: 0.4.64 To view the ChangeLog, please visit http://www.alsa-project.org/alsa-info.sh.changelog ALSA-Info script has been downloaded /tmp/alsa-info.2qNg4DeqNY. Please, re-run it from new location.
See the /tmp/alsa-info.2qNg4DeqNY. file referenced? Please attach that here. OK, when/if the problem re-occurs, may be worth gathering that info again
The problem is happening again. Below is the output of alsa-info and of the referenced script. Note that I needed to do some tweaks to have suspend working on this chromebook, see #1187767. --------------------------------------------- [sandrine@localhost ~]$ alsa-info ALSA Information Script v 0.4.62 -------------------------------- This script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware. dmesg lspci lsmod aplay amixer alsactl /proc/asound/ /sys/class/sound/ ~/.asoundrc (etc.) See '/usr/bin/alsa-info --help' for command line options. Newer version detected: 0.4.64 To view the ChangeLog, please visit http://www.alsa-project.org/alsa-info.sh.changelog ALSA-Info script has been downloaded /tmp/alsa-info.air4n1HWY7. Please, re-run it from new location. ------------------------------------------------------------ [sandrine@localhost ~]$ gedit /tmp/alsa-info.air4n1HWY7 #!/bin/bash SCRIPT_VERSION=0.4.64 CHANGELOG="http://www.alsa-project.org/alsa-info.sh.changelog" ################################################################################# #Copyright (C) 2007 Free Software Foundation. #This program is free software; you can redistribute it and/or modify #it under the terms of the GNU General Public License as published by #the Free Software Foundation; either version 2 of the License, or #(at your option) any later version. #This program is distributed in the hope that it will be useful, #but WITHOUT ANY WARRANTY; without even the implied warranty of #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #GNU General Public License for more details. #You should have received a copy of the GNU General Public License #along with this program; if not, write to the Free Software #Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ################################################################################## #The script was written for 2 main reasons: # 1. Remove the need for the devs/helpers to ask several questions before we can easily help the user. # 2. Allow newer/inexperienced ALSA users to give us all the info we need to help them. #Set the locale (this may or may not be a good idea.. let me know) export LC_ALL=C #Change the PATH variable, so we can run lspci (needed for some distros) PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin BGTITLE="ALSA-Info v $SCRIPT_VERSION" PASTEBINKEY="C9cRIO8m/9y8Cs0nVs0FraRx7U0pHsuc" #Define some simple functions pbcheck(){ [[ $UPLOAD = "no" ]] && return if [[ -z $PASTEBIN ]]; then [[ $(ping -c1 www.alsa-project.org) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes" else [[ $(ping -c1 www.pastebin.ca) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes" fi } update() { SHFILE=`mktemp -t alsa-info.XXXXXXXXXX` || exit 1 wget -O $SHFILE "http://www.alsa-project.org/alsa-info.sh" >/dev/null 2>&1 REMOTE_VERSION=`grep SCRIPT_VERSION $SHFILE |head -n1 |sed 's/.*=//'` if [ "$REMOTE_VERSION" != "$SCRIPT_VERSION" ]; then if [[ -n $DIALOG ]] then OVERWRITE= if [ -w $0 ]; then dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to install it?\nNOTICE: The original file $0 will be overwritten!" 0 0 DIALOG_EXIT_CODE=$? if [[ $DIALOG_EXIT_CODE = 0 ]]; then OVERWRITE=yes fi fi if [ -z "$OVERWRITE" ]; then dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to download it?" 0 0 DIALOG_EXIT_CODE=$? fi if [[ $DIALOG_EXIT_CODE = 0 ]] then echo "Newer version detected: $REMOTE_VERSION" echo "To view the ChangeLog, please visit $CHANGELOG" if [ "$OVERWRITE" = "yes" ]; then cp $SHFILE $0 echo "ALSA-Info script has been updated to v $REMOTE_VERSION" echo "Please re-run the script" rm $SHFILE 2>/dev/null else echo "ALSA-Info script has been downloaded as $SHFILE." echo "Please re-run the script from new location." fi exit else rm $SHFILE 2>/dev/null fi else echo "Newer version detected: $REMOTE_VERSION" echo "To view the ChangeLog, please visit $CHANGELOG" if [ -w $0 ]; then echo "The original file $0 will be overwritten!" echo -n "If you do not like to proceed, press Ctrl-C now.." ; read inp cp $SHFILE $0 echo "ALSA-Info script has been updated. Please re-run it." rm $SHFILE 2>/dev/null else echo "ALSA-Info script has been downloaded $SHFILE." echo "Please, re-run it from new location." fi exit fi else rm $SHFILE 2>/dev/null fi } cleanup() { if [ -n "$TEMPDIR" -a "$KEEP_FILES" != "yes" ]; then rm -rf "$TEMPDIR" 2>/dev/null fi test -n "$KEEP_OUTPUT" || rm -f "$NFILE" } withaplay() { echo "!!Aplay/Arecord output" >> $FILE echo "!!--------------------" >> $FILE echo "" >> $FILE echo "APLAY" >> $FILE echo "" >> $FILE aplay -l >> $FILE 2>&1 echo "" >> $FILE echo "ARECORD" >> $FILE echo "" >> $FILE arecord -l >> $FILE 2>&1 echo "" >> $FILE } withlsmod() { echo "!!All Loaded Modules" >> $FILE echo "!!------------------" >> $FILE echo "" >> $FILE lsmod |awk {'print $1'} >> $FILE echo "" >> $FILE echo "" >> $FILE } withamixer() { echo "!!Amixer output" >> $FILE echo "!!-------------" >> $FILE echo "" >> $FILE for i in `grep "]: " /proc/asound/cards | awk -F ' ' '{ print $1} '` ; do CARD_NAME=`grep "^ *$i " $TEMPDIR/alsacards.tmp|awk {'print $2'}` echo "!!-------Mixer controls for card $i $CARD_NAME]" >> $FILE echo "" >>$FILE amixer -c$i info>> $FILE 2>&1 amixer -c$i>> $FILE 2>&1 echo "" >> $FILE done echo "" >> $FILE } withalsactl() { echo "!!Alsactl output" >> $FILE echo "!!--------------" >> $FILE echo "" >> $FILE exe="" if [ -x /usr/sbin/alsactl ]; then exe="/usr/sbin/alsactl" fi if [ -x /usr/local/sbin/alsactl ]; then exe="/usr/local/sbin/alsactl" fi if [ -z "$exe" ]; then exe=`whereis alsactl | cut -d ' ' -f 2` fi $exe -f $TEMPDIR/alsactl.tmp store echo "--startcollapse--" >> $FILE cat $TEMPDIR/alsactl.tmp >> $FILE echo "--endcollapse--" >> $FILE echo "" >> $FILE echo "" >> $FILE } withdevices() { echo "!!ALSA Device nodes" >> $FILE echo "!!-----------------" >> $FILE echo "" >> $FILE ls -la /dev/snd/* >> $FILE echo "" >> $FILE echo "" >> $FILE } withconfigs() { if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]] || [[ -e $HOME/.asoundrc.asoundconf ]] then echo "!!ALSA configuration files" >> $FILE echo "!!------------------------" >> $FILE echo "" >> $FILE #Check for ~/.asoundrc if [[ -e $HOME/.asoundrc ]] then echo "!!User specific config file (~/.asoundrc)" >> $FILE echo "" >> $FILE cat $HOME/.asoundrc >> $FILE echo "" >> $FILE echo "" >> $FILE fi #Check for .asoundrc.asoundconf (seems to be Ubuntu specific) if [[ -e $HOME/.asoundrc.asoundconf ]] then echo "!!asoundconf-generated config file" >> $FILE echo "" >> $FILE cat $HOME/.asoundrc.asoundconf >> $FILE echo "" >> $FILE echo "" >> $FILE fi #Check for /etc/asound.conf if [[ -e /etc/asound.conf ]] then echo "!!System wide config file (/etc/asound.conf)" >> $FILE echo "" >> $FILE cat /etc/asound.conf >> $FILE echo "" >> $FILE echo "" >> $FILE fi fi } withsysfs() { local i f local printed="" for i in /sys/class/sound/*; do case "$i" in */hwC?D?) if [ -f $i/init_pin_configs ]; then if [ -z "$printed" ]; then echo "!!Sysfs Files" >> $FILE echo "!!-----------" >> $FILE echo "" >> $FILE fi for f in init_pin_configs driver_pin_configs user_pin_configs init_verbs hints; do echo "$i/$f:" >> $FILE cat $i/$f >> $FILE echo >> $FILE done printed=yes fi ;; esac done if [ -n "$printed" ]; then echo "" >> $FILE fi } withdmesg() { echo "!!ALSA/HDA dmesg" >> $FILE echo "!!--------------" >> $FILE echo "" >> $FILE dmesg | grep -C1 -E 'ALSA|HDA|HDMI|snd[_-]|sound|hda.codec|hda.intel' >> $FILE echo "" >> $FILE echo "" >> $FILE } withall() { withdevices withconfigs withaplay withamixer withalsactl withlsmod withsysfs withdmesg WITHALL="no" } get_alsa_library_version() { ALSA_LIB_VERSION=`grep VERSION_STR /usr/include/alsa/version.h 2>/dev/null|awk {'print $3'}|sed 's/"//g'` if [ -z "$ALSA_LIB_VERSION" ]; then if [ -f /etc/lsb-release ]; then . /etc/lsb-release case "$DISTRIB_ID" in Ubuntu) if which dpkg > /dev/null ; then ALSA_LIB_VERSION=`dpkg -l libasound2 | tail -1 | awk '{print $3}' | cut -f 1 -d -` fi if [ "$ALSA_LIB_VERSION" = "<none>" ]; then ALSA_LIB_VERSION="" fi return ;; *) return ;; esac elif [ -f /etc/debian_version ]; then if which dpkg > /dev/null ; then ALSA_LIB_VERSION=`dpkg -l libasound2 | tail -1 | awk '{print $3}' | cut -f 1 -d -` fi if [ "$ALSA_LIB_VERSION" = "<none>" ]; then ALSA_LIB_VERSION="" fi return fi fi } #Run checks to make sure the programs we need are installed. LSPCI=$(which lspci 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null); TPUT=$(which tput 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null); DIALOG=$(which dialog 2>/dev/null | sed 's|^[^/]*||' 2>/dev/null); #Check to see if sysfs is enabled in the kernel. We'll need this later on SYSFS=$(mount |grep sysfs|awk {'print $3'}); #Check modprobe config files for sound related options SNDOPTIONS=$(modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p') KEEP_OUTPUT= NFILE="" PASTEBIN="" WWWSERVICE="www.alsa-project.org" WELCOME="yes" PROCEED="yes" UPLOAD="ask" REPEAT="" while [ -z "$REPEAT" ]; do REPEAT="no" case "$1" in --update|--help|--about) WELCOME="no" PROCEED="no" ;; --upload) UPLOAD="yes" WELCOME="no" ;; --no-upload) UPLOAD="no" WELCOME="no" ;; --pastebin) PASTEBIN="yes" WWWSERVICE="pastebin" ;; --no-dialog) DIALOG="" REPEAT="" shift ;; --stdout) DIALOG="" UPLOAD="no" WELCOME="no" TOSTDOUT="yes" ;; esac done #Script header output. if [ "$WELCOME" = "yes" ]; then greeting_message="\ This script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware. dmesg lspci lsmod aplay amixer alsactl /proc/asound/ /sys/class/sound/ ~/.asoundrc (etc.) See '$0 --help' for command line options. " if [ -n "$DIALOG" ]; then dialog --backtitle "$BGTITLE" \ --title "ALSA-Info script v $SCRIPT_VERSION" \ --msgbox "$greeting_message" 20 80 else echo "ALSA Information Script v $SCRIPT_VERSION" echo "--------------------------------" echo "$greeting_message" fi # dialog fi # WELCOME #Set the output file TEMPDIR=`mktemp -t -d alsa-info.XXXXXXXXXX` || exit 1 FILE="$TEMPDIR/alsa-info.txt" if [ -z "$NFILE" ]; then NFILE=`mktemp -t alsa-info.txt.XXXXXXXXXX` || exit 1 fi trap cleanup 0 if [ "$PROCEED" = "yes" ]; then if [ -z "$LSPCI" ]; then if [ -d /sys/bus/pci ]; then echo "This script requires lspci. Please install it, and re-run this script." exit 0 fi fi #Fetch the info and store in temp files/variables DISTRO=`grep -ihs "buntu\|SUSE\|Fedora\|PCLinuxOS\|MEPIS\|Mandriva\|Debian\|Damn\|Sabayon\|Slackware\|KNOPPIX\|Gentoo\|Zenwalk\|Mint\|Kubuntu\|FreeBSD\|Puppy\|Freespire\|Vector\|Dreamlinux\|CentOS\|Arch\|Xandros\|Elive\|SLAX\|Red\|BSD\|KANOTIX\|Nexenta\|Foresight\|GeeXboX\|Frugalware\|64\|SystemRescue\|Novell\|Solaris\|BackTrack\|KateOS\|Pardus" /etc/{issue,*release,*version}` KERNEL_VERSION=`uname -r` KERNEL_PROCESSOR=`uname -p` KERNEL_MACHINE=`uname -m` KERNEL_OS=`uname -o` [[ `uname -v | grep SMP` ]] && KERNEL_SMP="Yes" || KERNEL_SMP="No" ALSA_DRIVER_VERSION=`cat /proc/asound/version |head -n1|awk {'print $7'} |sed 's/\.$//'` get_alsa_library_version ALSA_UTILS_VERSION=`amixer -v |awk {'print $3'}` LAST_CARD=$((`grep "]: " /proc/asound/cards | wc -l` - 1 )) ESDINST=$(which esd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null) PAINST=$(which pulseaudio 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null) ARTSINST=$(which artsd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null) JACKINST=$(which jackd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null) ROARINST=$(which roard 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null) DMIDECODE=$(which dmidecode 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null) #Check for DMI data if [ -d /sys/class/dmi/id ]; then # No root privileges are required when using sysfs method DMI_SYSTEM_MANUFACTURER=$(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) DMI_SYSTEM_PRODUCT_NAME=$(cat /sys/class/dmi/id/product_name 2>/dev/null) DMI_SYSTEM_PRODUCT_VERSION=$(cat /sys/class/dmi/id/product_version 2>/dev/null) DMI_SYSTEM_FIRMWARE_VERSION=$(cat /sys/class/dmi/id/bios_version 2>/dev/null) elif [ -x $DMIDECODE ]; then DMI_SYSTEM_MANUFACTURER=$($DMIDECODE -s system-manufacturer 2>/dev/null) DMI_SYSTEM_PRODUCT_NAME=$($DMIDECODE -s system-product-name 2>/dev/null) DMI_SYSTEM_PRODUCT_VERSION=$($DMIDECODE -s system-version 2>/dev/null) DMI_SYSTEM_FIRMWARE_VERSION=$($DMIDECODE -s bios-version 2>/dev/null) fi cat /proc/asound/modules 2>/dev/null|awk {'print $2'}>$TEMPDIR/alsamodules.tmp cat /proc/asound/cards >$TEMPDIR/alsacards.tmp if [[ ! -z "$LSPCI" ]]; then lspci |grep -i "multi\|audio">$TEMPDIR/lspci.tmp fi #Check for HDA-Intel cards codec#* cat /proc/asound/card*/codec\#* > $TEMPDIR/alsa-hda-intel.tmp 2> /dev/null #Check for AC97 cards codec cat /proc/asound/card*/codec97\#0/ac97\#0-0 > $TEMPDIR/alsa-ac97.tmp 2> /dev/null cat /proc/asound/card*/codec97\#0/ac97\#0-0+regs > $TEMPDIR/alsa-ac97-regs.tmp 2> /dev/null #Check for USB mixer setup cat /proc/asound/card*/usbmixer > $TEMPDIR/alsa-usbmixer.tmp 2> /dev/null #Fetch the info, and put it in $FILE in a nice readable format. if [[ -z $PASTEBIN ]]; then echo "upload=true&script=true&cardinfo=" > $FILE else echo "name=$USER&type=33&description=/tmp/alsa-info.txt&expiry=&s=Submit+Post&content=" > $FILE fi echo "!!################################" >> $FILE echo "!!ALSA Information Script v $SCRIPT_VERSION" >> $FILE echo "!!################################" >> $FILE echo "" >> $FILE echo "!!Script ran on: `LANG=C TZ=UTC date`" >> $FILE echo "" >> $FILE echo "" >> $FILE echo "!!Linux Distribution" >> $FILE echo "!!------------------" >> $FILE echo "" >> $FILE echo $DISTRO >> $FILE echo "" >> $FILE echo "" >> $FILE echo "!!DMI Information" >> $FILE echo "!!---------------" >> $FILE echo "" >> $FILE echo "Manufacturer: $DMI_SYSTEM_MANUFACTURER" >> $FILE echo "Product Name: $DMI_SYSTEM_PRODUCT_NAME" >> $FILE echo "Product Version: $DMI_SYSTEM_PRODUCT_VERSION" >> $FILE echo "Firmware Version: $DMI_SYSTEM_FIRMWARE_VERSION" >> $FILE echo "" >> $FILE echo "" >> $FILE echo "!!Kernel Information" >> $FILE echo "!!------------------" >> $FILE echo "" >> $FILE echo "Kernel release: $KERNEL_VERSION" >> $FILE echo "Operating System: $KERNEL_OS" >> $FILE echo "Architecture: $KERNEL_MACHINE" >> $FILE echo "Processor: $KERNEL_PROCESSOR" >> $FILE echo "SMP Enabled: $KERNEL_SMP" >> $FILE echo "" >> $FILE echo "" >> $FILE echo "!!ALSA Version" >> $FILE echo "!!------------" >> $FILE echo "" >> $FILE echo "Driver version: $ALSA_DRIVER_VERSION" >> $FILE echo "Library version: $ALSA_LIB_VERSION" >> $FILE echo "Utilities version: $ALSA_UTILS_VERSION" >> $FILE echo "" >> $FILE echo "" >> $FILE echo "!!Loaded ALSA modules" >> $FILE echo "!!-------------------" >> $FILE echo "" >> $FILE cat $TEMPDIR/alsamodules.tmp >> $FILE echo "" >> $FILE echo "" >> $FILE echo "!!Sound Servers on this system" >> $FILE echo "!!----------------------------" >> $FILE echo "" >> $FILE if [[ -n $PAINST ]];then [[ `pgrep '^(.*/)?pulseaudio$'` ]] && PARUNNING="Yes" || PARUNNING="No" echo "Pulseaudio:" >> $FILE echo " Installed - Yes ($PAINST)" >> $FILE echo " Running - $PARUNNING" >> $FILE echo "" >> $FILE fi if [[ -n $ESDINST ]];then [[ `pgrep '^(.*/)?esd$'` ]] && ESDRUNNING="Yes" || ESDRUNNING="No" echo "ESound Daemon:" >> $FILE echo " Installed - Yes ($ESDINST)" >> $FILE echo " Running - $ESDRUNNING" >> $FILE echo "" >> $FILE fi if [[ -n $ARTSINST ]];then [[ `pgrep '^(.*/)?artsd$'` ]] && ARTSRUNNING="Yes" || ARTSRUNNING="No" echo "aRts:" >> $FILE echo " Installed - Yes ($ARTSINST)" >> $FILE echo " Running - $ARTSRUNNING" >> $FILE echo "" >> $FILE fi if [[ -n $JACKINST ]];then [[ `pgrep '^(.*/)?jackd$'` ]] && JACKRUNNING="Yes" || JACKRUNNING="No" echo "Jack:" >> $FILE echo " Installed - Yes ($JACKINST)" >> $FILE echo " Running - $JACKRUNNING" >> $FILE echo "" >> $FILE fi if [[ -n $ROARINST ]];then [[ `pgrep '^(.*/)?roard$'` ]] && ROARRUNNING="Yes" || ROARRUNNING="No" echo "RoarAudio:" >> $FILE echo " Installed - Yes ($ROARINST)" >> $FILE echo " Running - $ROARRUNNING" >> $FILE echo "" >> $FILE fi if [[ -z "$PAINST" && -z "$ESDINST" && -z "$ARTSINST" && -z "$JACKINST" && -z "$ROARINST" ]];then echo "No sound servers found." >> $FILE echo "" >> $FILE fi echo "" >> $FILE echo "!!Soundcards recognised by ALSA" >> $FILE echo "!!-----------------------------" >> $FILE echo "" >> $FILE cat $TEMPDIR/alsacards.tmp >> $FILE echo "" >> $FILE echo "" >> $FILE if [[ ! -z "$LSPCI" ]]; then echo "!!PCI Soundcards installed in the system" >> $FILE echo "!!--------------------------------------" >> $FILE echo "" >> $FILE cat $TEMPDIR/lspci.tmp >> $FILE echo "" >> $FILE echo "" >> $FILE echo "!!Advanced information - PCI Vendor/Device/Subsystem ID's" >> $FILE echo "!!-------------------------------------------------------" >> $FILE echo "" >> $FILE lspci -vvn |grep -A1 040[1-3] >> $FILE echo "" >> $FILE echo "" >> $FILE fi if [ "$SNDOPTIONS" ] then echo "!!Modprobe options (Sound related)" >> $FILE echo "!!--------------------------------" >> $FILE echo "" >> $FILE modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p' >> $FILE echo "" >> $FILE echo "" >> $FILE fi if [ -d "$SYSFS" ] then echo "!!Loaded sound module options" >> $FILE echo "!!---------------------------" >> $FILE echo "" >> $FILE for mod in `cat /proc/asound/modules|awk {'print $2'}`;do echo "!!Module: $mod" >> $FILE for params in `echo $SYSFS/module/$mod/parameters/*`; do echo -ne "\t"; echo "$params : `cat $params`" | sed 's:.*/::'; done >> $FILE echo "" >> $FILE done echo "" >> $FILE fi if [ -s "$TEMPDIR/alsa-hda-intel.tmp" ]; then echo "!!HDA-Intel Codec information" >> $FILE echo "!!---------------------------" >> $FILE echo "--startcollapse--" >> $FILE echo "" >> $FILE cat $TEMPDIR/alsa-hda-intel.tmp >> $FILE echo "--endcollapse--" >> $FILE echo "" >> $FILE echo "" >> $FILE fi if [ -s "$TEMPDIR/alsa-ac97.tmp" ]; then echo "!!AC97 Codec information" >> $FILE echo "!!----------------------" >> $FILE echo "--startcollapse--" >> $FILE echo "" >> $FILE cat $TEMPDIR/alsa-ac97.tmp >> $FILE echo "" >> $FILE cat $TEMPDIR/alsa-ac97-regs.tmp >> $FILE echo "--endcollapse--" >> $FILE echo "" >> $FILE echo "" >> $FILE fi if [ -s "$TEMPDIR/alsa-usbmixer.tmp" ]; then echo "!!USB Mixer information" >> $FILE echo "!!---------------------" >> $FILE echo "--startcollapse--" >> $FILE echo "" >> $FILE cat $TEMPDIR/alsa-usbmixer.tmp >> $FILE echo "--endcollapse--" >> $FILE echo "" >> $FILE echo "" >> $FILE fi #If no command line options are specified, then run as though --with-all was specified if [ -z "$1" ]; then update pbcheck fi fi # proceed #loop through command line arguments, until none are left. if [ -n "$1" ]; then until [ -z "$1" ] do case "$1" in --pastebin) update pbcheck ;; --update) update exit ;; --upload) UPLOAD="yes" ;; --no-upload) UPLOAD="no" ;; --output) shift NFILE="$1" KEEP_OUTPUT="yes" ;; --debug) echo "Debugging enabled. $FILE and $TEMPDIR will not be deleted" KEEP_FILES="yes" echo "" ;; --with-all) withall ;; --with-aplay) withaplay WITHALL="no" ;; --with-amixer) withamixer WITHALL="no" ;; --with-alsactl) withalsactl WITHALL="no" ;; --with-devices) withdevices WITHALL="no" ;; --with-dmesg) withdmesg WITHALL="no" ;; --with-configs) WITHALL="no" if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]] then echo "!!ALSA configuration files" >> $FILE echo "!!------------------------" >> $FILE echo "" >> $FILE #Check for ~/.asoundrc if [[ -e $HOME/.asoundrc ]] then echo "!!User specific config file ($HOME/.asoundrc)" >> $FILE echo "" >> $FILE cat $HOME/.asoundrc >> $FILE echo "" >> $FILE echo "" >> $FILE fi #Check for /etc/asound.conf if [[ -e /etc/asound.conf ]] then echo "!!System wide config file (/etc/asound.conf)" >> $FILE echo "" >> $FILE cat /etc/asound.conf >> $FILE echo "" >> $FILE echo "" >> $FILE fi fi ;; --stdout) UPLOAD="no" if [ -z "$WITHALL" ]; then withall fi cat $FILE rm $FILE ;; --about) echo "Written/Tested by the following users of #alsa on irc.freenode.net:" echo "" echo " wishie - Script author and developer / Testing" echo " crimsun - Various script ideas / Testing" echo " gnubien - Various script ideas / Testing" echo " GrueMaster - HDA Intel specific items / Testing" echo " olegfink - Script update function" echo " TheMuso - display to stdout functionality" exit 0 ;; *) echo "alsa-info.sh version $SCRIPT_VERSION" echo "" echo "Available options:" echo " --with-aplay (includes the output of aplay -l)" echo " --with-amixer (includes the output of amixer)" echo " --with-alsactl (includes the output of alsactl)" echo " --with-configs (includes the output of ~/.asoundrc and" echo " /etc/asound.conf if they exist)" echo " --with-devices (shows the device nodes in /dev/snd/)" echo " --with-dmesg (shows the ALSA/HDA kernel messages)" echo "" echo " --output FILE (specify the file to output for no-upload mode)" echo " --update (check server for script updates)" echo " --upload (upload contents to remote server)" echo " --no-upload (do not upload contents to remote server)" echo " --pastebin (use http://pastebin.ca) as remote server" echo " instead www.alsa-project.org" echo " --stdout (print alsa information to standard output" echo " instead of a file)" echo " --about (show some information about the script)" echo " --debug (will run the script as normal, but will not" echo " delete $FILE)" exit 0 ;; esac shift 1 done fi if [ "$PROCEED" = "no" ]; then exit 1 fi if [ -z "$WITHALL" ]; then withall fi if [ "$UPLOAD" = "ask" ]; then if [ -n "$DIALOG" ]; then dialog --backtitle "$BGTITLE" --title "Information collected" --yes-label " UPLOAD / SHARE " --no-label " SAVE LOCALLY " --defaultno --yesno "\n\nAutomatically upload ALSA information to $WWWSERVICE?" 10 80 DIALOG_EXIT_CODE=$? if [ $DIALOG_EXIT_CODE != 0 ]; then UPLOAD="no" else UPLOAD="yes" fi else echo -n "Automatically upload ALSA information to $WWWSERVICE? [y/N] : " read -e CONFIRM if [ "$CONFIRM" != "y" ]; then UPLOAD="no" else UPLOAD="yes" fi fi fi if [ "$UPLOAD" = "no" ]; then if [ -z "$TOSTDOUT" ]; then mv -f $FILE $NFILE || exit 1 KEEP_OUTPUT="yes" fi if [[ -n $DIALOG ]] then if [[ -n $PBERROR ]]; then dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "An error occurred while contacting the $WWWSERVICE.\n Your information was NOT automatically uploaded.\n\nYour ALSA information is in $NFILE" 10 100 else dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "\n\nYour ALSA information is in $NFILE" 10 60 fi else echo if [[ -n $PBERROR ]]; then echo "An error occurred while contacting the $WWWSERVICE." echo "Your information was NOT automatically uploaded." echo "" echo "Your ALSA information is in $NFILE" echo "" else if [ -z "$TOSTDOUT" ]; then echo "" echo "Your ALSA information is in $NFILE" echo "" fi fi fi exit fi # UPLOAD #Test that wget is installed, and supports --post-file. Upload $FILE if it does, and prompt user to upload file if it doesnt. if WGET=$(which wget 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null); [[ -n "${WGET}" ]] && [[ -x "${WGET}" ]] && [[ `wget --help |grep post-file` ]] then if [[ -n $DIALOG ]] then if [[ -z $PASTEBIN ]]; then wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://www.alsa-project.org/cardinfo-db/" &>$TEMPDIR/wget.tmp || echo "Upload failed; exit" { for i in 10 20 30 40 50 60 70 80 90; do echo $i sleep 0.2 done echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.alsa-project.org ..." 6 70 0 else wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY&encrypt=t&encryptpw=blahblah" &>$TEMPDIR/wget.tmp || echo "Upload failed; exit" { for i in 10 20 30 40 50 60 70 80 90; do echo $i sleep 0.2 done echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.pastebin.ca ..." 6 70 0 fi dialog --backtitle "$BGTITLE" --title "Information uploaded" --yesno "Would you like to see the uploaded information?" 5 100 DIALOG_EXIT_CODE=$? if [ $DIALOG_EXIT_CODE = 0 ]; then grep -v "alsa-info.txt" $FILE >$TEMPDIR/uploaded.txt dialog --backtitle "$BGTITLE" --textbox $TEMPDIR/uploaded.txt 0 0 fi clear # no dialog else if [[ -z $PASTEBIN ]]; then echo -n "Uploading information to www.alsa-project.org ... " wget -O - --tries=5 --timeout=60 --post-file=$FILE http://www.alsa-project.org/cardinfo-db/ &>$TEMPDIR/wget.tmp & else echo -n "Uploading information to www.pastebin.ca ... " wget -O - --tries=5 --timeout=60 --post-file=$FILE http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY &>$TEMPDIR/wget.tmp & fi #Progess spinner for wget transfer. i=1 sp="/-\|" echo -n ' ' while pgrep wget &>/dev/null do echo -en "\b${sp:i++%${#sp}:1}" done echo -e "\b Done!" echo "" fi #dialog #See if tput is available, and use it if it is. if [ -n "$TPUT" ]; then if [[ -z $PASTEBIN ]]; then FINAL_URL=`tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2 ; tput sgr0` else FINAL_URL=`tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p';tput sgr0` fi else if [[ -z $PASTEBIN ]]; then FINAL_URL=`grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2` else FINAL_URL=`grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p'` fi fi # Output the URL of the uploaded file. echo "Your ALSA information is located at $FINAL_URL" echo "Please inform the person helping you." echo "" # We couldnt find a suitable wget, so tell the user to upload manually. else mv -f $FILE $NFILE || exit 1 KEEP_OUTPUT="yes" if [[ -z $DIALOG ]] then if [[ -z $PASTEBIN ]]; then echo "" echo "Could not automatically upload output to http://www.alsa-project.org" echo "Possible reasons are:" echo " 1. Couldnt find 'wget' in your PATH" echo " 2. Your version of wget is less than 1.8.2" echo "" echo "Please manually upload $NFILE to http://www.alsa-project.org/cardinfo-db/ and submit your post." echo "" else echo "" echo "Could not automatically upload output to http://www.pastebin.ca" echo "Possible reasons are:" echo " 1. Couldnt find 'wget' in your PATH" echo " 2. Your version of wget is less than 1.8.2" echo "" echo "Please manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post." echo "" fi else if [[ -z $PASTEBIN ]]; then dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.alsa-project.org.\nPossible reasons are:\n\n 1. Couldn't find 'wget' in your PATH\n 2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.alsa-project,org/cardinfo-db/ and submit your post." 25 100 else dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.pastebin.ca.\nPossible reasons are:\n\n 1. Couldn't find 'wget' in your PATH\n 2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post." 25 100 fi fi fi
Sorry, I copied the script but actually I should have run it. Here is the ouput. ----------------------------------------------------------- ALSA Information Script v 0.4.64 -------------------------------- [sandrine@localhost ~]$ sudo /tmp/alsa-info.air4n1HWY7 This script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware. dmesg lspci lsmod aplay amixer alsactl /proc/asound/ /sys/class/sound/ ~/.asoundrc (etc.) See '/tmp/alsa-info.air4n1HWY7 --help' for command line options. /usr/sbin/alsactl: save_state:1590: No soundcards found... cat: /tmp/alsa-info.ZLC1mV3CqK/alsactl.tmp: No such file or directory Automatically upload ALSA information to www.alsa-project.org? [y/N] : Y Your ALSA information is in /tmp/alsa-info.txt.Z5hgowW3cF ------------------------------------------------------------- [sandrine@localhost ~]$ gedit /tmp/alsa-info.txt.Z5hgowW3cF upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.64 !!################################ !!Script ran on: Sat Jan 31 18:21:24 UTC 2015 !!Linux Distribution !!------------------ Fedora release 21 (Twenty One) Fedora release 21 (Twenty One) NAME=Fedora ID=fedora PRETTY_NAME="Fedora 21 (Twenty One)" CPE_NAME="cpe:/o:fedoraproject:fedora:21" HOME_URL="https://fedoraproject.org/" BUG_REPORT_URL="https://bugzilla.redhat.com/" REDHAT_BUGZILLA_PRODUCT="Fedora" REDHAT_BUGZILLA_PRODUCT_VERSION=21 REDHAT_SUPPORT_PRODUCT="Fedora" REDHAT_SUPPORT_PRODUCT_VERSION=21 Fedora release 21 (Twenty One) Fedora release 21 (Twenty One) !!DMI Information !!--------------- Manufacturer: GOOGLE Product Name: Peppy Product Version: 1.0 Firmware Version: 4.0-6588-g4acd8ea-dirty !!Kernel Information !!------------------ Kernel release: 3.17.8-300.fc21.x86_64 Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k3.17.8-300.fc21.x86_64 Library version: Utilities version: 1.0.28 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/bin/pulseaudio) Running - Yes Jack: Installed - Yes (/bin/jackd) Running - No !!Soundcards recognised by ALSA !!----------------------------- --- no soundcards --- !!PCI Soundcards installed in the system !!-------------------------------------- 00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09) 00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 00:03.0 0403: 8086:0a0c (rev 09) Subsystem: 1025:0a11 -- 00:1b.0 0403: 8086:9c20 (rev 04) Subsystem: 1025:0a11 !!Loaded sound module options !!--------------------------- !!ALSA Device nodes !!----------------- crw-rw----+ 1 root audio 116, 1 Jan 31 16:15 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Jan 31 16:15 /dev/snd/timer !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # # Place your global alsa-lib configuration here... # !!Aplay/Arecord output !!-------------------- APLAY aplay: device_list:268: no soundcards found... ARECORD arecord: device_list:268: no soundcards found... !!Amixer output !!------------- !!Alsactl output !!-------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module rfcomm fuse ccm nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_rpfilter ip6t_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw bnep arc4 ath9k ath9k_common ath9k_hw intel_rapl ath x86_pkg_temp_thermal mac80211 coretemp kvm_intel kvm snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel cyapa snd_hda_controller uvcvideo atmel_mxt_ts snd_hda_codec ath3k btusb iTCO_wdt iTCO_vendor_support videobuf2_vmalloc videobuf2_memops videobuf2_core snd_hwdep bluetooth snd_seq cfg80211 crct10dif_pclmul snd_seq_device crc32_pclmul v4l2_common crc32c_intel snd_pcm videodev ghash_clmulni_intel media chromeos_laptop i2c_i801 snd_timer rfkill serio_raw shpchp snd dw_dmac_pci dw_dmac dw_dmac_core lpc_ich i2c_designware_pci i2c_designware_platform mfd_core i2c_designware_core soundcore nfsd auth_rpcgss nfs_acl lockd sunrpc i915 i2c_algo_bit drm_kms_helper drm sdhci_acpi sdhci mmc_core video !!ALSA/HDA dmesg !!-------------- [ 1209.096579] ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -19 [ 1209.099213] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 1209.105691] snd_hda_intel 0000:00:03.0: irq 45 for MSI/MSI-X [ 1209.116015] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 1209.116021] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 1209.116024] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 1209.116027] sound hdaudioC0D0: mono: mono_out=0x0 [ 1209.116029] sound hdaudioC0D0: inputs: [ 1209.116032] sound hdaudioC0D0: Internal Mic=0x1a [ 1209.116034] sound hdaudioC0D0: Mic=0x19 [ 1209.121074] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input85 [ 1209.122775] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input86 [ 1209.122964] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input87 [ 1209.147654] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input88 [ 1209.147820] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input89 [ 1209.148633] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
This message is a reminder that Fedora 21 is nearing its end of life. Approximately 4 (four) weeks from now Fedora will stop maintaining and issuing updates for Fedora 21. It is Fedora's policy to close all bug reports from releases that are no longer maintained. At that time this bug will be closed as EOL if it remains open with a Fedora 'version' of '21'. Package Maintainer: If you wish for this bug to remain open because you plan to fix it in a currently maintained version, simply change the 'version' to a later Fedora version. Thank you for reporting this issue and we are sorry that we were not able to fix it before Fedora 21 is end of life. If you would still like to see this bug fixed and are able to reproduce it against a later version of Fedora, you are encouraged change the 'version' to a later Fedora version prior this bug is closed as described in the policy above. Although we aim to fix as many bugs as possible during every release's lifetime, sometimes those efforts are overtaken by events. Often a more recent Fedora release includes newer upstream software that fixes bugs or makes them obsolete.
Fedora 21 changed to end-of-life (EOL) status on 2015-12-01. Fedora 21 is no longer maintained, which means that it will not receive any further security or bug fix updates. As a result we are closing this bug. If you can reproduce this bug against a currently maintained version of Fedora please feel free to reopen this bug against that version. If you are unable to reopen this bug, please file a new report against the current release. If you experience problems, please add a comment to this bug. Thank you for reporting this bug and we are sorry it could not be fixed.