Description of problem: Installed image does not complete boot on Cubietruck, hangs on starting kernel. Version-Release number of selected component (if applicable): Fedora-Minimal-armhfp-rawhide-20160210 (4.5.0-0.rc3.git1.1.fc24.armv7hl) How reproducible: Steps to Reproduce: 1.xzcat /home/d-mostyn/Downloads/Fedora-Minimal-armhfp-rawhide-20160210-sda.raw.xz | dd of=/dev/mmcblk0; sync 2. insert SD into Cubietruck and power on 3. Actual results: Setting up a 1024x768 vga console (overscan 0x0) In: serial Out: vga Err: vga SCSI: SUNXI SCSI INIT Target spinup took 0 ms. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: eth0: ethernet@01c50000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 575 bytes read in 101 ms (4.9 KiB/s) Ignoring unknown command: ui Ignoring malformed menu command: autoboot Ignoring malformed menu command: hidden Ignoring unknown command: totaltimeout Fedora-Minimal-armhfp-rawhide-20160210 Boot Options. 1: Fedora-Minimal-armhfp-rawhide-20160210 (4.5.0-0.rc3.git1.1.fc24.armv7hl) Enter choice: 1: Fedora-Minimal-armhfp-rawhide-20160210 (4.5.0-0.rc3.git1.1.fc24.armv7hl) Retrieving file: /initramfs-4.5.0-0.rc3.git1.1.fc24.armv7hl.img 39267850 bytes read in 2189 ms (17.1 MiB/s) Retrieving file: /vmlinuz-4.5.0-0.rc3.git1.1.fc24.armv7hl 6094208 bytes read in 379 ms (15.3 MiB/s) append: ro root=UUID=91a7dc6d-a543-4e20-8a37-e30cfc5bc429 Retrieving file: /dtb-4.5.0-0.rc3.git1.1.fc24.armv7hl/sun7i-a20-cubietruck.dtb 30801 bytes read in 978 ms (30.3 KiB/s) Kernel image @ 0x42000000 [ 0x000000 - 0x5cfd80 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 47a8d000, end 49fffe0a ... OK Loading Device Tree to 47a82000, end 47a8c850 ... OK Starting kernel ... Expected results: Display kernel messages on completion run initial-setup-text Additional info:
If it is not obvious using a serial console during boot.
*** This bug has been marked as a duplicate of bug 1303147 ***