Description of problem:

Since kernel 4.9.9-200.fc25.x86_64 my computer stuck on boot. The error seems similar to this one https://bugzilla.redhat.com/show_bug.cgi?id=1095601

actually, my error is: 

0000:01:00.0 priv: HUB0: 085014 ffffffff (1d70820B)
0000:01:00.0 priv: GPC0 4188ac 00000001 (1870822e)
0000:01:00.0 DRM: Pointer to TDMS table invalid
0000:01:00.0 DRM: Pointer to flat panel table invalid

I have reinstalled xorg-x11-drv-nouveau.x86_64 and the problem still persists with kernel 4.9.9-200.fc25.x86_64 and 4.9.10-200.fc25.x86_64 but I can boot with 4.9.8-200.fc25.x86_64

I suppose this information is not enough so please I would need information about how to debug and provide good logs to fix this problem.

Version-Release number of selected component (if applicable):

xorg-x11-drv-nouveau.x86_64            1:1.0.13-1.fc25        
X.Org X Server 1.19.1
01:00.0 3D controller: NVIDIA Corporation GK208M [GeForce GT 740M] (rev a1)




How reproducible:

Steps to Reproduce:
1. Upgrade fedora 25 to kernel 4.9.9-200.fc25.x86_64 or newer.
2. Reboot 
3. boot stuck

Actual results:

Boot stops with error

0000:01:00.0 priv: HUB0: 085014 ffffffff (1d70820B)
0000:01:00.0 priv: GPC0 4188ac 00000001 (1870822e)
0000:01:00.0 DRM: Pointer to TDMS table invalid
0000:01:00.0 DRM: Pointer to flat panel table invalid


Expected results:

boot properly 

Additional info:

01:00.0 3D controller: NVIDIA Corporation GK208M [GeForce GT 740M] (rev a1)
        Subsystem: Micro-Star International Co., Ltd. [MSI] Device 10e9
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 34
        Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at e000 [size=128]
        Expansion ROM at f7000000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee8000c  Data: 41b2
        Capabilities: [78] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75.000W
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
                         EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-
        Capabilities: [128 v1] Power Budgeting <?>
        Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
        Capabilities: [900 v1] #19
        Kernel driver in use: nouveau
        Kernel modules: nouveau

The boot stops even before to ask password for luks unlock.