Note: This bug is displayed in read-only format because
the product is no longer active in Red Hat Bugzilla.
RHEL Engineering is moving the tracking of its product development work on RHEL 6 through RHEL 9 to Red Hat Jira (issues.redhat.com). If you're a Red Hat customer, please continue to file support cases via the Red Hat customer portal. If you're not, please head to the "RHEL project" in Red Hat Jira and file new tickets here. Individual Bugzilla bugs in the statuses "NEW", "ASSIGNED", and "POST" are being migrated throughout September 2023. Bugs of Red Hat partners with an assigned Engineering Partner Manager (EPM) are migrated in late September as per pre-agreed dates. Bugs against components "kernel", "kernel-rt", and "kpatch" are only migrated if still in "NEW" or "ASSIGNED". If you cannot log in to RH Jira, please consult article #7032570. That failing, please send an e-mail to the RH Jira admins at rh-issues@redhat.com to troubleshoot your issue as a user management inquiry. The email creates a ServiceNow ticket with Red Hat. Individual Bugzilla bugs that are migrated will be moved to status "CLOSED", resolution "MIGRATED", and set with "MigratedToJIRA" in "Keywords". The link to the successor Jira issue will be found under "Links", have a little "two-footprint" icon next to it, and direct you to the "RHEL project" in Red Hat Jira (issue links are of type "https://issues.redhat.com/browse/RHEL-XXXX", where "X" is a digit). This same link will be available in a blue banner at the top of the page informing you that that bug has been migrated.
DescriptionChristian Trautman
2018-01-04 16:32:28 UTC
Created attachment 1377021[details]
sosreport
Description of problem:
Qede 41262H card will not add port to OVS-DPDK. Reports RAMROD error.
Version-Release number of selected component (if applicable):
How reproducible:
Always
Steps to Reproduce:
1. Make sure correct firmware file is in place /lib/firmware/qed/qed_init_values-8.30.12.0.bin
2. set Qlogic ISCSI and Fcoe ports to bind to driver none using driverctl
3. set Qlogic network ports to vfio-pci driver using driverctl
4. Add netdev bridge and try to add a Qlogic port as dpdk port to bridge
driverctl -v set-override 0000:05:00.0 vfio-pci
driverctl -v set-override 0000:05:00.1 vfio-pci
driverctl -v set-override 0000:05:00.2 none
driverctl -v set-override 0000:05:00.3 none
driverctl -v set-override 0000:05:00.4 none
driverctl -v set-override 0000:05:00.5 none
systemctl start openvswitch
PMDMASK=<appropriate PMD mask>
systemctl start openvswitch
ovs-vsctl set Open_vSwitch . other_config={}
ovs-vsctl add-br ovsbr0 -- set bridge ovsbr0 datapath_type=netdev
ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-init=true
ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024,1024"
ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=$PMDMASK
ovs-vsctl add-port ovsbr0 dpdk0 -- set interface dpdk0 type=dpdk ofport_request=10 options:dpdk-devargs=0000:05:00.0
ovs-vsctl: Error detected while setting up 'dpdk0': Error attaching device '0000:05:00.0' to DPDK. See ovs-vswitchd log for details.
ovs-vsctl: The default log directory is "/var/log/openvswitch".
Actual results:
Log reports
Jan 04 11:18:08 netqe22.knqe.lab.eng.bos.redhat.com ovs-vswitchd[9369]: ovs|00052|dpdk|ERR|[QEDE PMD: (05:00.0:dpdk-port-0-0)]ecore_spq_block:Ramrod is stuck [CID ff000000 cmd 02 proto 04 echo 0004]
Jan 04 11:18:08 netqe22.knqe.lab.eng.bos.redhat.com ovs-vswitchd[9369]: ovs|00053|dpdk|ERR|[qede_hw_err_notify:292(05:00.0:dpdk-port-0-0)]HW error occurred [Ramrod Failure]
Jan 04 11:18:08 netqe22.knqe.lab.eng.bos.redhat.com ovs-vswitchd[9369]: ovs|00054|dpdk|ERR|[qede_activate_vport:469(05:00.0:dpdk-port-0)]Failed to update vport
Expected results:
Can add dpdk port for QLogic correctly.
Additional info:
driver: qede
version: 8.10.10.21
firmware-version: mfw 8.18.18.0 storm 8.20.0.0
expansion-rom-version:
bus-info: 0000:05:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: yes
openvswitch-2.9.0-0.2.20171212git6625e43.el7fdb.x86_64
dpdk-tools-17.11-2.el7fdb.x86_64
dpdk-17.11-2.el7fdb.x86_64
driverctl-0.95-1.el7fdparch.noarch
Will check 45000 series card today as well.
Comment 2Christian Trautman
2018-01-04 16:51:17 UTC
Created attachment 1387046[details]
QEDE PMD MTU fix
The attached patch is a fix for QEDE PMD submitted to dpdk.org for inclusion in DPDK 18.02 and DPDK 17.11 stable. The patch is back ported to apply cleanly on DPDK 17.11 GA. Please apply the patch and re-test.
HI Ameen, Rasesh
Please post results for PVP/Vsperf tests for OVS-DPDK with QEDE with this patch including configuration steps.
We will in turn wait for rpm build in fast datapth channel for Chris and QE to test.
Thanks
Hi Anita,
We are running into issues with the PVP/VSPerf tests. Due to this we are not able to complete some tests. Rasesh is working with Chris on this.
Thanks,
-Ameen
Comment 10Christian Trautman
2018-02-07 19:47:38 UTC
Verified using test build from Matteo. Could add ports successfully.
Comment 13Jean-Tsung Hsiao
2018-02-13 03:13:32 UTC
(In reply to Christian Trautman from comment #10)
> Verified using test build from Matteo. Could add ports successfully.
Also, verified for QL45212H 25 Gb adapter.
Since the problem described in this bug report should be
resolved in a recent advisory, it has been closed with a
resolution of ERRATA.
For information on the advisory, and where to find the updated
files, follow the link below.
If the solution does not work for you, open a new bug report.
https://access.redhat.com/errata/RHBA-2018:2432
Created attachment 1377021 [details] sosreport Description of problem: Qede 41262H card will not add port to OVS-DPDK. Reports RAMROD error. Version-Release number of selected component (if applicable): How reproducible: Always Steps to Reproduce: 1. Make sure correct firmware file is in place /lib/firmware/qed/qed_init_values-8.30.12.0.bin 2. set Qlogic ISCSI and Fcoe ports to bind to driver none using driverctl 3. set Qlogic network ports to vfio-pci driver using driverctl 4. Add netdev bridge and try to add a Qlogic port as dpdk port to bridge driverctl -v set-override 0000:05:00.0 vfio-pci driverctl -v set-override 0000:05:00.1 vfio-pci driverctl -v set-override 0000:05:00.2 none driverctl -v set-override 0000:05:00.3 none driverctl -v set-override 0000:05:00.4 none driverctl -v set-override 0000:05:00.5 none systemctl start openvswitch PMDMASK=<appropriate PMD mask> systemctl start openvswitch ovs-vsctl set Open_vSwitch . other_config={} ovs-vsctl add-br ovsbr0 -- set bridge ovsbr0 datapath_type=netdev ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-init=true ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024,1024" ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=$PMDMASK ovs-vsctl add-port ovsbr0 dpdk0 -- set interface dpdk0 type=dpdk ofport_request=10 options:dpdk-devargs=0000:05:00.0 ovs-vsctl: Error detected while setting up 'dpdk0': Error attaching device '0000:05:00.0' to DPDK. See ovs-vswitchd log for details. ovs-vsctl: The default log directory is "/var/log/openvswitch". Actual results: Log reports Jan 04 11:18:08 netqe22.knqe.lab.eng.bos.redhat.com ovs-vswitchd[9369]: ovs|00052|dpdk|ERR|[QEDE PMD: (05:00.0:dpdk-port-0-0)]ecore_spq_block:Ramrod is stuck [CID ff000000 cmd 02 proto 04 echo 0004] Jan 04 11:18:08 netqe22.knqe.lab.eng.bos.redhat.com ovs-vswitchd[9369]: ovs|00053|dpdk|ERR|[qede_hw_err_notify:292(05:00.0:dpdk-port-0-0)]HW error occurred [Ramrod Failure] Jan 04 11:18:08 netqe22.knqe.lab.eng.bos.redhat.com ovs-vswitchd[9369]: ovs|00054|dpdk|ERR|[qede_activate_vport:469(05:00.0:dpdk-port-0)]Failed to update vport Expected results: Can add dpdk port for QLogic correctly. Additional info: driver: qede version: 8.10.10.21 firmware-version: mfw 8.18.18.0 storm 8.20.0.0 expansion-rom-version: bus-info: 0000:05:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: yes supports-priv-flags: yes openvswitch-2.9.0-0.2.20171212git6625e43.el7fdb.x86_64 dpdk-tools-17.11-2.el7fdb.x86_64 dpdk-17.11-2.el7fdb.x86_64 driverctl-0.95-1.el7fdparch.noarch Will check 45000 series card today as well.